Your hydrangea shrubs’ blossoms appear to be withering or turning brown. No need to worry—this is merely a signal that it’s time to deadhead—remove the blossoms from the plant.
Deadheading hydrangeas doesn’t cause any damage to the plants at all. Flowering shrubs stop producing seeds when the spent blooms are removed, and instead focus their efforts on developing their roots and leaves. You will be doing your hydrangeas a favor by deadheading because this strengthens and makes plants healthier.
When should dead hydrangea blossoms be removed?
These are your macrophylla hydrangeas, also known as mophead and lacecap, which come in purple, pink, and blue. They also include hydrangeas with oak-shaped leaves. While reblooming kinds flower twice, some cultivars only bloom once per season on stems from the previous year (old wood).
The initial set of hydrangea blossoms should be deadheaded as soon as they start to turn brown and dry. Cut the stem immediately above the first set of leaves and below the flower head. When this second set starts to fade, you can deadhead once again for reblooming varieties, but only until about mid-August. Your hydrangeas will then produce buds for the flowers of the next year; you don’t want to unintentionally cut these off. After the summer has ended, dried flower heads can remain on the shrubs to add visual interest over the winter.
What occurs if hydrangeas are not deadheaded?
Deadheading too-tall hydrangeas can occasionally be challenging. Your other option is to keep them on if you don’t have the skills to reach spent flowers or all of the spent blooms. And you can do that without suffering too much harm.
Simply omit deadheading hydrangeas, and your plant won’t suffer. At least nothing major enough to need worrying about.
Your hydrangea might not produce as many or as large of blooms as it would have if the spent blooms had been removed. It will nevertheless continue to bloom.
Having said that, you can think about pruning hydrangeas that have gotten too tall in order to make them smaller and easier to handle.
This will make it simpler for you to maintain the tidy appearance of your hydrangeas. Additionally, it will make it simpler to remove spent blooms from plants and promote future blooms with greater vigor.
Should I remove the spring blooms of my brown hydrangea?
Pruning is not typically thought of as one of the many gardening activities that may be done in the fall, despite the fact that there are several. It can be difficult to cultivate hydrangeas successfully in New Hampshire, and if you want your plants to blossom, there is frequently very little room for error in pruning.
Wait until Spring to prune hydrangeas
In New Hampshire, hydrangeas come in a variety of kinds, and each one has quite distinct growth patterns and pruning needs. Some plants only produce flowers on fresh growth, while others mostly produce flower buds on older wood. In any case, it is better to postpone all hydrangea pruning until spring. Hydrangeas, as with all other trees and shrubs, go dormant in the fall. Not much new growth is produced by them until the next spring. As new growth is more vulnerable to harsh cold at the location of wounds, plants that have been trimmed now run a higher risk of winter damage. Additionally, fall pruning may lessen the quantity of June blooms.
Considerations for pruning hydrangea species commonly grown in New Hampshire gardens
The gigantic blue mopheads or lacecaps known as bigleaf hydrangeas (Hydrangea macrophylla), which are familiar to most gardeners, form their flower heads at the tips of stems on old wood from the previous year. Although lower buds along the stem have the capacity to grow blooms as well, the hydrangea’s blossoming potential is decreased if those buds are died or damaged throughout the winter. Wait until new growth sprouts in the spring before pruning your bigleaf hydrangeas. Approximately 1/4 inch above the first group of live buds, prune the plant. A hint: the interior of living stems will be green, whereas the interior of dead stems will be brown. Cut completely dead stems flush with the base.
The three other hydrangea species that are frequently planted in Fresh Hampshire—oakleaf (H. quercifolia), panicle (H. paniculata), and smooth—all bloom on new growth. Before the emergence of the leaves in the late winter and early spring, remove wasted flowers and prune the plant to improve its general structure and habit.
In conclusion, there are a ton of other activities you can engage in to stay occupied in the garden during fall. Save the spring for hydrangea pruning.
Should I prune my hydrangea’s dead heads?
Correctly and timely deadheading your hydrangeas only benefits these plants in the long run. Deadheading is the technique of removing wasted flowers from a plant to promote greater blooming later on, much like trimming. Professional gardener Melinda Myers notes that deadheading encourages the plant’s energy to flow into the leaves, stems, and roots (rather than developing seeds) for future growth.
According to Myers, deadheading your hydrangeas provides cosmetic advantages in addition to enhancing the future blooms. She says that many gardeners prefer the neat and tidy impression that faded blooms create to that of dried flowers left on the plant. The species of your hydrangeas will determine when and how to deadhead them, according to Myers. Here is her response to our question regarding the ideal moment and technique for harvesting finished flowers from several varieties of hydrangeas.
What should you do if hydrangea blooms start to deteriorate?
The beauty of hydrangeas is expected to last a lifetime! The garden’s most perfect, essential blossoms! However, you can see dark stains on the leaves of your hydrangea. Or even worse, the blossoms are fading to brown!
If you stay with us, we’ll have your garden favorite looking fantastic once more. Here’s a quick cure for those typical hydrangea issues.
Simple Steps to Stunning Blooms (Again)
How to Address Typical Hydrangea Issues
Not a Spot! Hydrangea leaves get unattractive, black stains when it rains unusually much (or if you overwater them). This Cercospora leaf fungus is relatively innocuous despite its frightening name. Remove badly impacted foliage and leaves with spots to stop the fungus from spreading.
Will to Wilt 2. Are the hydrangea blossoms withering or drooping? Your plant is most likely receiving insufficient water and too much light. Verify that the soil is moist one to two feet down. If not, deeply spritz. Repeat weekly for optimum hydrangea care. Mulch can also help you save water, so add some. If that isn’t the case, perform a soil test to determine the nitrogen levels in your soil. Make the necessary changes.
Three. Brown Blooms Your hydrangea blooms may need extra water if they are prematurely turning brown and fading away. The same applies if your flowers start to wilt during the day and don’t recover at night. Look for brown stains on the leaf edges to confirm. Once a week, deeply water hydrangeas to mend.
4. Holy Grail Foliage. Hydrangea leaves have holes chewed through by fruit bugs and slugs. Open a holey leaf. A fruit worm is what you should locate if it resembles a caterpillar. Utilize soapy water to get rid of them. Slugs are probably responsible if nothing is found. They can be hand-selected at night or given a nightcap. Bury a plastic cup so that the rim is level with the ground next to the hydrangea. Then pour half a beer into the cup.
Blooms Be Gone, No. 5. Your hydrangea is barren of blossoms. You probably pruned your hydrangea at the incorrect time, removing all of its fresh blossoms. Instead of trimming hydrangeas this year, read our hydrangea pruning recommendations to ensure that you never prune them at the incorrect time again.
Purple Pout, 6. Remove the leaves and branches that have the purple stains from your leaves. You may not have enough phosphorus in your soil if the entire leaf is purple. Test your soil, and adjust as necessary.
Abracadabra! Your hydrangea issues will shortly be resolved. Then, you can concentrate on all the wonderful aspects of cultivating hydrangeas, such as enjoying their enormous, fluffy blossoms.
What makes deadheading and trimming distinct from one another?
Fortunately, all you need for this project are some clippers, gloves, and a pail to gather your cuttings. I really appreciate this multi-snip tool that I discovered last spring for this gardening task because deadheading is typically a little more delicate than full-on trimming. Use anything you have, including regular bypass pruners.
Since I normally go through 1-2 pairs of gloves in a season (due to holes in the fingertips…), I bought these gloves last spring. I was impressed by how lightweight but robust they are. Since I have spare pairs accessible for any garden assistance I may hire, I haven’t even pierced the first pair’s fingertips yet.
General Pruning-Deadheading Tips
(Note: pruning refers to removing any portion of the plant, from large to small – what we’re doing in the summer is small, just cutting back some and trimming.) Deadheading is the practice of removing wasted flowers from plants.
The majority of your perennials and shrubs that have bloomed or are still blooming only require that you “deadhead,” or cut off the spent blossoms. To determine where to cut the dead flower, consider the following two factors:
- Like this buddleia in the picture above, you can prune it back to the first sign of new growth. This small variety (Lo & Behold ‘Ice Chip’) will continue to bloom into the fall thanks to those new stems on the sides that will bear additional flowers.
- OR, you might prune it more, taking further cuts to keep it under control for the planting area. To prevent the plant from getting too huge or to assist it maintain a more aesthetically acceptable form, continue to look for new growth, but further down on the stems.
You’ll also find plants with dead flower stalks and leaves, like the daylily in this image. Your garden will look better into the fall if you take the effort to remove the browning, dead leaves and deadhead the flower stalks. The majority of daylilies have finished flowering, but they will continue to provide grass-like leaves as a backdrop to the garden. However, some types, like Stella d’Oro, will continue to bloom if the dead stalks are removed.
Shearing the plant back is the simplest approach to get rid of all the wasted flowers on perennials with tiny blooms, like hardy geranium. Once the majority of the wasted blooms have been removed from the plant, grab pieces with your hand and chop the entire part off. For a week or two, it won’t look its finest, but it will soon sprout new growth and produce more blooms.
The heavy blooms on mature hydrangeas may be causing the plant to bend and dip, exposing the crowns. It’s the ideal moment to remove the oldest blossoms, especially those at the bottom, so that the leaves can reposition themselves. If you cultivate a reblooming hydrangea, such as Endless Summer, it will keep producing new flowers for you.
The act of gathering all the blooms and decorating the home with vases of fresh flowers after hydrangea trimming in the summer is the greatest part!
You’ve undoubtedly been deadheading individual rose blossoms as they appeared over the previous few months, but your shrub will bloom more quickly if you trim back to a five-leaf junction, where new growth and blooms will develop.
Additionally, you should prune back to new growth to remove any damaged leaves and stems (like I obviously have on some of my roses – if you live in the Pacific Northwest, every rose will get blackspot…). This not only improves the appearance but also helps prevent disease from spreading to the new growth.
Have any advice to offer? Have you come across any plants that benefit from mid-season deadheading, shearing, or pruning? Comment below and let me know!
To get you thinking about fall, check out these additional posts from our Tuesdays in the Garden group!
Should hydrangeas be deadheaded in the winter?
Some hydrangeas, but not all, can be deadheaded, or the wasted flowers can be removed off the stem to promote better blooming later.
Only after blossoming in moderate climates, according to the RHS, should dead blooms on mophead hydrangeas be removed. According to their suggestions, it is preferable to leave the flowerheads on the plant throughout the winter to offer some frost protection.
Additionally, by leaving the dried blooms on the plant, you’ll keep the garden interesting through spring and they can make a beautiful sight when coated in frost.
However, after blossoming, the blooms on the more resilient lacecaps can be deadheaded.