Pruning is not typically thought of as one of the many gardening activities that may be done in the fall, despite the fact that there are several. It can be difficult to cultivate hydrangeas successfully in New Hampshire, and if you want your plants to blossom, there is frequently very little room for error in pruning.
Wait until Spring to prune hydrangeas
In New Hampshire, hydrangeas come in a variety of kinds, and each one has quite distinct growth patterns and pruning needs. Some plants only produce flowers on fresh growth, while others mostly produce flower buds on older wood. In any case, it is better to postpone all hydrangea pruning until spring. Hydrangeas, as with all other trees and shrubs, go dormant in the fall. Not much new growth is produced by them until the next spring. As new growth is more vulnerable to harsh cold at the location of wounds, plants that have been trimmed now run a higher risk of winter damage. Additionally, fall pruning may lessen the quantity of June blooms.
Considerations for pruning hydrangea species commonly grown in New Hampshire gardens
The gigantic blue mopheads or lacecaps known as bigleaf hydrangeas (Hydrangea macrophylla), which are familiar to most gardeners, form their flower heads at the tips of stems on old wood from the previous year. Although lower buds along the stem have the capacity to grow blooms as well, the hydrangea’s blossoming potential is decreased if those buds are died or damaged throughout the winter. Wait until new growth sprouts in the spring before pruning your bigleaf hydrangeas. Approximately 1/4 inch above the first group of live buds, prune the plant. A hint: the interior of living stems will be green, whereas the interior of dead stems will be brown. Cut completely dead stems flush with the base.
The three other hydrangea species that are frequently planted in Fresh Hampshire—oakleaf (H. quercifolia), panicle (H. paniculata), and smooth—all bloom on new growth. Before the emergence of the leaves in the late winter and early spring, remove wasted flowers and prune the plant to improve its general structure and habit.
In conclusion, there are a ton of other activities you can engage in to stay occupied in the garden during fall. Save the spring for hydrangea pruning.
Which month do you prune back hydrangeas?
Depending on which group the plant belongs to, the timing and extent of pruning are determined:
Advice on Pruning for Group 1:
- As the days get shorter and the weather gets colder in the late summer and fall, buds for the following year’s blooms start to form.
- Typically, removing dead, diseased, or damaged branches is all that is required to preserve shape, size, and a healthy plant. Otherwise, gentle pruning ought to be practiced.
- In the summer, trimming should begin as soon as flowering ends, but no later than August 1. Pruning should not be done in the fall, winter, or spring because you risk removing fresh buds.
- Tip-pruning the branches in the spring as the leaves begin to appear can promote more numerous, smaller flower heads as opposed to fewer, larger flower heads.
Advice on Pruning for Group 2:
- On the growth of the current year, flower buds form.
- Early in the spring, as the leaves are starting to emerge, prune.
- Just above a node, prune branches back by half to a third.
- After that, prune any fragile or spindly branches.
- Minimal trimming encourages huge, strong bushes with many of tiny flower heads in H. arborescens. Hard pruning between 12 and 18 inches from the ground, or even all the way down, will result in fewer but larger flower heads that may flop if unsupported.
- For H. paniculata, remove the surrounding smaller wood while leaving the larger stems in order to establish a sturdy foundation.
Pruning may be connected to flower head size. Shoots will grow more vigorously and flower heads will be bigger and fewer with more rigorous trimming. Smaller but more numerous flower heads may result from less aggressive or tip pruning.
Consideration of hydrangeas’ mature size is the best piece of advise. Place them in a location where they won’t outgrow and won’t need a lot of pruning to keep them in check. Hydrangeas don’t need to be pruned precisely or often; as long as dead wood is removed, they will remain healthy and continue to develop and bloom.
Do all hydrangeas require a fall pruning?
Only prune these hydrangeas in the summer after bloom, not in the fall. In August and September, old wood hydrangeas begin to form their bloom buds for the following year. It is advisable to delay pruning your hydrangeas until the following year if you don’t do it right away. If not, there won’t be any blossoms the next spring.
In the fall, how far back should hydrangeas be pruned?
Trimming season for hydrangeas that bloom on new wood runs from late fall through early spring. This group includes smooth and peegee forms, which function well whether they are pruned lightly, to the ground, or not at all. In order to maintain a compact stature and luxuriant flowering, Peegee hydrangeas are frequently pruned into trees with one or two main stems that are between 15 and 30 feet tall.
Smooth hydrangeas can be pruned all the way to the ground; however, the more frequently they are cut, the less able their stems are to withstand the weight of their huge blooms. Smooth hydrangeas grow in mounds that are 3 to 6 feet tall and wide. When the plants are pruned to leave between 18 and 24 inches of growth, a woody base forms that helps the stems support the pompom blooms more effectively.
Cut back these shrubs in late winter before new growth begins
Shrubs that flower on young wood typically start blooming later than old-growth bloomers, beginning in June and continuing until the first frost, because they need to grow and set buds the same year that they bloom. As long as you avoid trimming when the flower buds are opening, these shrubs are understanding if it is not done at a specific period.
1. Trim the flowers all the way back for larger blooms.
These bushes can be completely removed from the ground in late winter or the beginning of spring. If cut severely like this every year, smooth hydrangeas will produce much larger flowers, but many gardeners prefer smaller blooms on stronger stems.
2. Maintain an old growth foundation to lessen flopping
Especially after watering from above or after a heavy storm, the branches of some hydrangeas frequently topple over from the weight of their blooms. Cutting the stems to a height of 18 to 24 inches will help to reduce this flopping by creating a strong framework for fresh growth.
Janet Carson is the University of Arkansas Cooperative Extension Service’s horticulture specialist.
Receive our most recent advice, training, and tutorial videos in your inbox.
How are hydrangeas prepared for the winter?
Protecting flower buds is the aim of winter hydrangea care. The simplest approach is to pile 12 inches or so of mulch made of chopped-up leaves or bark around the base of the plant. After the ground freezes in the late fall, set the mulch pile there. Plants can then be exposed in the spring, when the temperature starts to stay above freezing.
How are hydrangeas prepared for winter?
Winter winds and cold temperatures both have the potential to be fatal. This catch-all phrase simply denotes plant dying over the winter. The plant may perish due to the low winter temperatures or from drying out brought on by the winds.
Since hydrangeas become dormant in the winter, winter damage to hydrangeas can not become apparent until spring. If your hydrangea doesn’t produce any green shoots in March or April, it could be your first indication of harm.
Protecting the shrubs from winter’s wrath is necessary to avoid winter kill in hydrangeas, which includes the young buds on the plants. Laying down a heavy layer of mulch over hydrangeas’ root zone is a wonderful place to start with winterizing them. For this, straw works wonderfully.
Use a wire cage to enclose the shrub or construct a cage around it using sturdy posts and chicken wire for even better protection. Wrap the cage in burlap or insulating material. Additionally, you should give the plant a lot of water right before the ground freezes.
Which hydrangeas ought to be left alone?
Here are several common hydrangea varieties and when to prune them:
- The most popular species of big-leaf hydrangeas, Hydrangea macrophyla, are the well-known mopheads and lacecaps, which come in a variety of shades including blue, violet, pink, purple, red, and white. After flowering, trim them since they blossom in the early summer on old wood.
- Hydrangea quercifolia, sometimes known as oakleaf hydrangea, is a native hydrangea with cone-shaped white blooms that turn a stunning shade of russet in the late summer. It too blooms on old wood, thus pruning shouldn’t be done before flowering.
- Panicle hydrangeas, Hydrangea paniculata: These shrubs (Tardivas, PeeGees) burst into panicle-shaped white flowers in mid- to late summer and are frequently pruned into tree forms. Prune these in the early spring before they produce new foliage since they blossom on fresh wood.
- Hydrangea arborescens, ‘Annabelle’: This variety flowers on new wood as well, so prune in early spring. In the spring, the globe-shaped blooms start out chartreuse and gradually turn white.
recurring, or “Reblooming hydrangeas: This unique breed of hydrangeas was developed to bloom multiple times throughout the growing season. They come in a variety of colors, and “Endless Summer” is one of the most well-known cultivars. This means that these hydrangeas can be pruned at any time because they bloom on both old and new wood.
Remove any dead branches and limbs from a hydrangea that blooms on old wood before thinning down the center of the plant to allow more sunlight to enter. The Tardiva and PeeGee types, which flower on fresh wood, can be trimmed judiciously by removing branches that don’t conform to the plant’s desired shape or regulate size. The most extreme haircuts are available for ‘Annabelle’ hydrangeas, which can have their entire shrub cut back to six to twelve inches above ground.
Do you now comprehend why the query “One of the biggest mysteries in gardening is when to prune my hydrangeas.
In the fall, what should I do with my hydrangeas?
Maintaining your hydrangea can greatly impact its blooms the next year. When given enough time and the right care, hydrangeas are resilient and can recover from virtually anything.
See our comprehensive growth guide for hydrangeas here after reading the fall maintenance advice below!
Because some hydrangea kinds do not like to be clipped in the fall, it is crucial to first identify your variety.
If you have hydrangeas in your garden, you should be aware that there are two different varieties. Both types develop blossom buds, one on new wood and the other on old wood. If a stem has remained on the plant since the previous summer, it is referred to as old wood. Stems that form this season are considered new wood. The majority of hydrangea species that are found in gardens are old wood bloomers, including as Mophead, Big Leaf, Lacecap, and Oakleaf types. Check your variety once more at the neighborhood garden center.
Hydrangeas can grow for many years without being pruned, but it’s time to cut them if they become unkempt, take over a portion of the garden, or stop producing new growth. But when should they be pruned?
After the summer blooms on old wood bloomers or fall blooming hydrangeas, prune them. Old, woody hydrangeas that are pruned in the fall will not bloom the following season.
Hydrangeas that bloom in the summer or those that do so on fresh wood are clipped in the fall, after their flowering season has ended.
Early in the season, hydrangeas are brilliant and colorful, but they are difficult to preserve after being cut. Once they begin to dry on the bush, they are simpler to maintain.
Your plant will have weak, wispy growth near the bottom. Reduce them. They will consume energy that could be used by your plant to produce blossoms.
On your stems, look for any dead stumps. They won’t have sprung any buds or new wood from the original old wood. To totally remove the dead stumps, cut them to the ground at the base. This will give the new growth below a chance to flourish.
To make way for new buds to emerge, old and dead blossoms must be eliminated. To promote flowers for the following summer, remove the flower head immediately above the first few leaves.
Observe the plant’s shape from a distance. The shrub should be pruned into the shape you desire; a spherical is the traditional shape, but you can prune it however you like!
Clean up any leftover debris from the plant’s foundation. Make sure your soil is devoid of all weeds, dead flowers, and leaves.
Feed your blue hydrangeas with Holly-tone to maintain acidic soil and vibrant flowers. Alternatively, choose Flower-tone.
Feed your hydrangeas two to three times each week from spring till fall for the greatest results.
Your hydrangeas will remain healthy and vibrant for many years if you follow these simple instructions.
What hydrangeas require pruning?
Late summer to early fall (August to September) sees the development of these plants’ bloom buds for the next year. So, before August, prune these shrubs once they are finished blooming (again, make a heading cut).
The Endless Summer is an exception. The Original Bigleaf Hydrangea (H. macrophylla ‘Bailmer’ PP15,298) as well as many cultivars from Bailey Nurseries’ Endless Summer line, including Blushing Bride, BloomStruck, Summer Crush, and Twist ‘n’ Shout.
On the wood from last year and any new wood that sprouts this year, the H. macrophylla blooms. Therefore, whether you prune it or not, it will bloom. A big, 4-foot-tall ring of hardware cloth can keep rabbits from nibbling on the stems of H. macrophylla over the winter.
The pink to blue tint of the Endless Summer hydrangea’s flowers (achievable with the right soil amendment) plus the fact that it blooms on both old and new wood caused it to make a big splash on the Minnesota landscape plant scene.
Can I prune my hydrangeas all the way down?
Cone-shaped flowers of the oakleaf hydrangea bloom in whites and creams before fading to red later in the season. its deeply cut leaves, which resemble oak tree leaves. Sizes of the several varieties range from the 2 tall “Sike’s Dwarf” to the 8 tall “Alice.” Our favorites are “Snow Queen,” “Pee Wee,” and “Munchkin.”
This hardy shrub does well in both full sun and full shade. Similar to the panicle hydrangea, we advise staying away from really hot exposures. In zones 5 to 9, the hydrangea quercifolia is hardy.
Pruning Oakleaf Hydrangea
On old wood, or the growth from the previous season, H. quercifolia blooms. A healthy or overgrown oakleaf hydrangea doesn’t require pruning. Take out the dead flower heads that are immediately beneath the bloom if you want to make it look nicer.
If your oakleaf hydrangea is quite old and woody, remove a couple of the thickest, oldest stems in the early spring all the way to the ground to promote some new growth. You’ll stress the plant and miss out on a full season of blooms if you chop the entire plant down to the ground.