When should I prune my hydrangeas? is one of the most often asked gardening topics. We all have a tendency to want to hurry outside with the clippers and start hacking away when those billowy large flowers change from cheerful blues, purples, pinks, reds, and whites to uninteresting browns.
When to Cut Back Hydrangeas
The timing will vary according on the variety of hydrangea you have. First of all, be aware that hydrangeas do not require pruning unless the shrub has become unruly or too big for its location and requires some shaping up. Otherwise, simply deadhead wasted blooms and remove any dead branches from the plant.
How to Prune Hydrangeas02:07
But if you do decide to prune one, bear in mind to time it so that it blooms on old wood or new wood depending on the species of hydrangea you have.
If you wait too long, you can chop off the buds that are developing on old wood (stems from the year before the current summer), which would prevent flowers from blooming the following spring. Therefore, as soon as the flowers on these bushes have faded, they should be clipped.
The shrub should be clipped in the early spring before that new growth appears, but, if the shrub flowers on fresh wood (stems generated during the current season), which means that its buds are set inside the season.
What occurs if hydrangeas are not pruned?
If and when you prune is the key to happy, healthy hydrangea flowers. Of course, fertilizing and offering the ideal environment have a lot to recommend them. However, if you don’t prune properly, your efforts will be in vain. Deadheading is not the same as trimming. Pruning refers to more drastic cutting to preserve shape or remove dead growth. However, feel free to discard spent blossoms or cut fresh ones to use in arrangements.
Hydrangeas can bloom on either fresh wood or old wood, depending on the species. The wood from which they blossom determines whether and when to prune.
Old wood-blooming hydrangeas do not require pruning and benefit from it. They’ll blossom more abundantly the next season if you leave them alone. But feel free to deadhead or gently thin. Just keep in mind that while new growth may appear, it won’t bloom until the following season. In our region, four different species blossom on aged wood. Additionally, they are not limited to the hues displayed here.
Climb using suckers. On your wall or trellis, resist the desire to remove the dormant growth.
The flower heads are more conical in appearance, and the leaves are large and resemble oak leaves. It’s a pleasant surprise for a hydrangea when its leaves turn reddish-orange in the fall.
They are very comparable to lacecap types, but smaller and with more compact leaves.
Pruning should be done in late winter or early spring on hydrangeas that bloom on new wood. Trim back to two feet to prune to shape. The next season’s blossoms are produced by strong, fresh growth that is encouraged by trimming. In our region, there are two types that bloom on fresh wood. They are also not restricted to the colors displayed.
Oakleaf variants are not included in cone-shaped blooms. Keep the blooms on throughout the winter to provide interest; even dried out, they are quite lovely.
regarded as a wild kind. They often have smaller blooms and leaves than Bigleaf variants and are completely white. They enjoy full sun and can grow very tall.
Knowing whether or when to prune now will help you avoid the disappointment of a hydrangea that doesn’t blossom. Don’t forget that a robust shrub will produce more gorgeous blossoms if it has well-draining soil and good organic fertilizer. Come on in, and we’ll show you where to go to develop your green thumb.
Hydrangeas need to be pruned, but how and when?
Depending on which group the plant belongs to, the timing and extent of pruning are determined:
Advice on Pruning for Group 1:
- As the days get shorter and the weather gets colder in the late summer and fall, buds for the following year’s blooms start to form.
- Typically, removing dead, diseased, or damaged branches is all that is required to preserve shape, size, and a healthy plant. Otherwise, gentle pruning ought to be practiced.
- In the summer, trimming should begin as soon as flowering ends, but no later than August 1. Pruning should not be done in the fall, winter, or spring because you risk removing fresh buds.
- Tip-pruning the branches in the spring as the leaves begin to appear can promote more numerous, smaller flower heads as opposed to fewer, larger flower heads.
Advice on Pruning for Group 2:
- On the growth of the current year, flower buds form.
- Early in the spring, as the leaves are starting to emerge, prune.
- Just above a node, prune branches back by half to a third.
- After that, prune any fragile or spindly branches.
- Minimal trimming encourages huge, strong bushes with many of tiny flower heads in H. arborescens. Hard pruning between 12 and 18 inches from the ground, or even all the way down, will result in fewer but larger flower heads that may flop if unsupported.
- For H. paniculata, remove the surrounding smaller wood while leaving the larger stems in order to establish a sturdy foundation.
Pruning may be connected to flower head size. Shoots will grow more vigorously and flower heads will be bigger and fewer with more rigorous trimming. Smaller but more numerous flower heads may result from less aggressive or tip pruning.
Consideration of hydrangeas’ mature size is the best piece of advise. Place them in a location where they won’t outgrow and won’t need a lot of pruning to keep them in check. Hydrangeas don’t need to be pruned precisely or often; as long as dead wood is removed, they will remain healthy and continue to develop and bloom.
Do hydrangeas need to be pruned back?
Remove up to one-third of the older living stems from the hydrangea each summer, cutting them all the way to the ground. The plant will recover as a result. Before the end of July, if required, prune back the plant to regulate its growth and give the buds time to grow. Usually, the plant grows back to its previous size right away.
Do you remove the dead blooms from hydrangeas?
Your hydrangea shrubs’ blossoms appear to be withering or turning brown. No need to worry—this is merely a signal that it’s time to deadhead—remove the blossoms from the plant.
Deadheading hydrangeas doesn’t cause any damage to the plants at all. Flowering shrubs stop producing seeds when the spent blooms are removed, and instead focus their efforts on developing their roots and leaves. You will be doing your hydrangeas a favor by deadheading because this strengthens and makes plants healthier.
Cut back these shrubs in late winter before new growth begins
Shrubs that flower on young wood typically start blooming later than old-growth bloomers, beginning in June and continuing until the first frost, because they need to grow and set buds the same year that they bloom. As long as you avoid trimming when the flower buds are opening, these shrubs are understanding if it is not done at a specific period.
1. Trim the flowers all the way back for larger blooms.
These bushes can be completely removed from the ground in late winter or the beginning of spring. If cut severely like this every year, smooth hydrangeas will produce much larger flowers, but many gardeners prefer smaller blooms on stronger stems.
2. Maintain an old growth foundation to lessen flopping
Especially after watering from above or after a heavy storm, the branches of some hydrangeas frequently topple over from the weight of their blooms. Cutting the stems to a height of 18 to 24 inches will help to reduce this flopping by creating a strong framework for fresh growth.
Janet Carson is the University of Arkansas Cooperative Extension Service’s horticulture specialist.
Receive our most recent advice, training, and tutorial videos in your inbox.
When should dead hydrangea blossoms be removed?
These are your macrophylla hydrangeas, also known as mophead and lacecap, which come in purple, pink, and blue. They also include hydrangeas with oak-shaped leaves. While reblooming kinds flower twice, some cultivars only bloom once per season on stems from the previous year (old wood).
The initial set of hydrangea blossoms should be deadheaded as soon as they start to turn brown and dry. Cut the stem immediately above the first set of leaves and below the flower head. When this second set starts to fade, you can deadhead once again for reblooming varieties, but only until about mid-August. Your hydrangeas will then produce buds for the flowers of the next year; you don’t want to unintentionally cut these off. After the summer has ended, dried flower heads can remain on the shrubs to add visual interest over the winter.
Why isn’t my hydrangea in bloom?
All varieties of hydrangeas should begin to bloom in the early spring or mid- to late-summer, and each flower should endure for many weeks.
Too much fertilizer, not enough sunlight, transplant shock, moisture stress, frost damage on developing flower buds, and severe trimming of the old wood that supports this season’s new hydrangea blossoms are the causes of hydrangeas not blossoming.
For more information on the reasons why your hydrangea isn’t blooming and how to make sure it blooms profusely the following year, continue reading.
How should a hydrangea shrub be pruned?
Mophead hydrangeas and lacecap hydrangeas, commonly known as bigleaf hydrangeas (Hydrangea macrophylla), are pruned using the same technique.
With its broad, roundish heads of huge petals in colours of blue, pink, green, and white, mophead hydrangeas are a popular choice for gardens. They are therefore a popular shrub option for cottage garden ideas and are also effective shade-giving bushes.
Small blooms in the center of the bloom and a border of bigger petals on the outside help identify lacecap hydrangeas.
The experts at Thompson & Morgan suggest that in order to winterize hydrangeas, “it’s better to leave the faded blooms in place over the winter to safeguard vulnerable new buds from frost damage.”
Early in the spring, while pruning lacecaps and mophead hydrangeas:
- To promote new growth that will produce better blooms, remove one or two of the plant’s oldest, weakest stems at the base.
- Just above a pair of buds, carefully remove any old flowerheads using secateurs.
- Don’t remove any of the blossom buds, please.
- Cut the stems down to the plant’s root system if the bigleaf hydrangea shrub has been neglected and has a lot of overlapping, tangled branches. The hydrangea won’t blossom until the next year, though.
How are hydrangeas cared for?
Although the hydrangea’s leaves and flowers seem delicate, little careful care is actually needed for them. Everything you need to know about caring for hydrangeas is provided in these recommendations.
- Over the course of the growing season, water at a rate of 1 inch per week. To promote root growth, deeply water three times each week. All varieties of hydrangeas benefit from constant moisture, but bigleaf and smooth hydrangeas need more water. To water thoroughly while keeping moisture off the flowers and leaves, use a soaker hose. Hydrangeas won’t wilt as much if they are watered early in the day on hot days.
- To keep the soil around your hydrangeas cool and moist, add mulch. Over time, an organic mulch decomposes, supplying nutrients and enhancing soil texture.
- Apply fertilizer according to the type of hydrangeas you have. Every variety has varied requirements and will profit from applying fertilizer at various times. A soil test is the most effective tool for determining your fertility requirements.
- In March, May, and June, bigleaf hydrangeas require numerous mild fertilizer applications.
- Two applications in April and June work best for oakleaf and panicle hydrangeas.
- The only time smooth hydrangea plants require fertilizing is in the late winter.
- By selecting cultivars with resistant characteristics, you can avoid pests and diseases. Hydrangeas can have leaf spots, bight, wilt, and powdery mildew. Although they are uncommon on hydrangeas, pests might arise when the plants are under stress. Aphids, leaf tiers, and red spider mites are examples of potential pests. Your best line of defense is to properly care for hydrangeas.
Do I need to remove the Brown hydrangea leaves?
If newly emerging hydrangea leaves or flower buds are exposed to a late-spring frost or chilly winds, they will turn brown. A unexpected cold spell can harm the newly emerging buds and leaves, which are exceptionally delicate and susceptible to injury. This can cause the buds to turn brown and wither away.
Naturally, hydrangeas grow in protected regions under trees that block chilly winds and produce a more stable microclimate that allows the young flowers to open up without facing a serious risk of frost.
Hydrangeas’ newly formed buds and leaves can become mushy and their leaves can turn brown when they sustain frost damage.
Since it is more exposed to the environment, the outermost growth is typically the one that suffers from the worst damage.
Sadly, the harmed flower buds are therefore unable to bloom, and the freshly growing growth is probably not going to recover.
Frost damage to hydrangea flower buds and foliage is more common in exposed areas, so plant or move your hydrangea to a more protected area of the garden, close to your house, or close to some other plants and hedges.
Particularly hedgerows are great wind breakers since they shield your hydrangea from the elements and might lessen the effects of frost.
There isn’t much you can do to save flower buds or younger leaves after they turn brown. As a result, prune back to healthy growth any growth that has been harmed by the frost.
In contrast to the flower buds on the plant’s outermost part, which are naturally less protected, hydrangeas frequently have growing flower buds farther down each branch. These flower buds typically survive a frost.
This implies that your hydrangea can still bloom, but much later and with fewer flowers emerging. With a little patience, you should still be able to enjoy some lovely blooms throughout the Summer.
What should hydrangeas be used for after flowering?
Because hydrangea blossoms are so large, deadheading a hydrangea can help the plant focus energy on other, more crucial aspects of its growth. To promote new blossoms and keep your plant appearing healthy, you should continue this approach throughout the flowering season. The time of year determines the best way to deadhead hydrangea blossoms.
You should cut the wasted blossoms with a long stem still attached if it’s before August. Look at the stem’s junction with the larger branch; there ought to be several little buds there. Make sure to keep the buds whole when trimming the stem back as short as you wish.
The plant is probably developing new buds along the stems in anticipation of the following spring if it is August or later. Check the area between each set of leaves as you work your way down the stem from the faded bloom. You should see buds at the first or second pair of leaves. Offset the spent bloom far above those buds with a knife.
Carry a cloth that has been dipped in denatured alcohol while you work. To stop disease from spreading throughout the bush, wipe your pruners clean with the rag in between cuts.