Due of its naturally dense and compact structure, bobo does not require routine pruning. Before new growth has begun, prune it for shape if you intend to use it as a hedge shrub in the early spring or late winter. To get the required shape, simply trim the branch tips.
What occurs if hydrangeas are not pruned?
If and when you prune is the key to happy, healthy hydrangea flowers. Of course, fertilizing and offering the ideal environment have a lot to recommend them. However, if you don’t prune properly, your efforts will be in vain. Deadheading is not the same as trimming. Pruning refers to more drastic cutting to preserve shape or remove dead growth. However, feel free to discard spent blossoms or cut fresh ones to use in arrangements.
Hydrangeas can bloom on either fresh wood or old wood, depending on the species. The wood from which they blossom determines whether and when to prune.
Old wood-blooming hydrangeas do not require pruning and benefit from it. They’ll blossom more abundantly the next season if you leave them alone. But feel free to deadhead or gently thin. Just keep in mind that while new growth may appear, it won’t bloom until the following season. In our region, four different species blossom on aged wood. Additionally, they are not limited to the hues displayed here.
Climb using suckers. On your wall or trellis, resist the desire to remove the dormant growth.
The flower heads are more conical in appearance, and the leaves are large and resemble oak leaves. It’s a pleasant surprise for a hydrangea when its leaves turn reddish-orange in the fall.
They are very comparable to lacecap types, but smaller and with more compact leaves.
Pruning should be done in late winter or early spring on hydrangeas that bloom on new wood. Trim back to two feet to prune to shape. The next season’s blossoms are produced by strong, fresh growth that is encouraged by trimming. In our region, there are two types that bloom on fresh wood. They are also not restricted to the colors displayed.
Oakleaf variants are not included in cone-shaped blooms. Keep the blooms on throughout the winter to provide interest; even dried out, they are quite lovely.
regarded as a wild kind. They often have smaller blooms and leaves than Bigleaf variants and are completely white. They enjoy full sun and can grow very tall.
Knowing whether or when to prune now will help you avoid the disappointment of a hydrangea that doesn’t blossom. Don’t forget that a robust shrub will produce more gorgeous blossoms if it has well-draining soil and good organic fertilizer. Come on in, and we’ll show you where to go to develop your green thumb.
How can Bobo hydrangeas be kept from flopping?
Because of their dense blooms, certain hydrangeas’ flowers have a tendency to droop. One or two flowers with “bad posture” are not cause for alarm, but when the bulk are hunched over, action must be taken.
Fair enough, young shrubs don’t have strong stems that will eventually be able to sustain heavier flowers. Even mature shrub branches can stoop due to heavy flowerheads that have been weighted down by rain or overhead irrigation, yet the girth and strength of bloom-bearing branches will increase as the shrub matures. There are numerous ways available to address the issue:
- Shake the water from the flowers gently to remove extra weight. With the evaporation of the remaining water, the flowers will continue to recover.
- To minimize the floral bulk, remove some of the bloom. Reach into the bloom with hand pruners and cut a piece off. Yes, the flower will be a little bit smaller, but people will still notice it for its beautiful stance.
Following are some images showing the results of pruning three different hydrangea species before and after:
Plants marked with a number sign (#) and a number are generally the same size as gallon pots; for example, #2 is equivalent to a 2 gallon pot, #3 to a 3 gallon pot, and so on. These plants are offered for sale in pots.
Plants with a height (such as 5-6′) give an estimate of the plant’s present height.
Plants that are measured in inches (such as 2.5″) are identified by their caliper, or trunk width.
Plants are typically larger when measured by caliper (inches) than when assessed by height (feet).
When should hydrangeas be pruned?
Depending on which group the plant belongs to, the timing and extent of pruning are determined:
Advice on Pruning for Group 1:
- As the days get shorter and the weather gets colder in the late summer and fall, buds for the following year’s blooms start to form.
- Typically, removing dead, diseased, or damaged branches is all that is required to preserve shape, size, and a healthy plant. Otherwise, gentle pruning ought to be practiced.
- In the summer, trimming should begin as soon as flowering ends, but no later than August 1. Pruning should not be done in the fall, winter, or spring because you risk removing fresh buds.
- Tip-pruning the branches in the spring as the leaves begin to appear can promote more numerous, smaller flower heads as opposed to fewer, larger flower heads.
Advice on Pruning for Group 2:
- On the growth of the current year, flower buds form.
- Early in the spring, as the leaves are starting to emerge, prune.
- Just above a node, prune branches back by half to a third.
- After that, prune any fragile or spindly branches.
- Minimal trimming encourages huge, strong bushes with many of tiny flower heads in H. arborescens. Hard pruning between 12 and 18 inches from the ground, or even all the way down, will result in fewer but larger flower heads that may flop if unsupported.
- For H. paniculata, remove the surrounding smaller wood while leaving the larger stems in order to establish a sturdy foundation.
Pruning may be connected to flower head size. Shoots will grow more vigorously and flower heads will be bigger and fewer with more rigorous trimming. Smaller but more numerous flower heads may result from less aggressive or tip pruning.
Consideration of hydrangeas’ mature size is the best piece of advise. Place them in a location where they won’t outgrow and won’t need a lot of pruning to keep them in check. Hydrangeas don’t need to be pruned precisely or often; as long as dead wood is removed, they will remain healthy and continue to develop and bloom.
How are Bobo hydrangeas prepared for the winter?
Hydrangeas are delicate plants that require good winter care to ensure that they bloom once more in the upcoming spring, despite their beauty and fragrance. It’s critical that you adequately protect your plants for the hard winter weather since the spring flowers of hydrangeas emerge from the buds from the previous year. If you don’t, your plant will plainly fail to bloom in the spring [source: Heuerman]. Read the simple instructions given below to find out how to get your hydrangea ready for the winter.
- Remove the dead branches by pruning. It’s crucial to only remove the unhealthy branches and leave the good ones; otherwise, you risk pruning the plant’s buds. The plant won’t blossom again in the spring if you do that. The plant’s root is where you’ll find the majority of the dead branches [source: BBC].
- Using wooden stakes, construct a frame around your hydrangea plant. The stakes can be positioned inside the branches of the plant if you reside in a region without much snowfall.
- The frame you constructed should be covered with chicken wire. It should build a cage around the entire plant.
- Mulch, pine needles, or leaves can be placed within the cage. To fully shield the plant from winter conditions, the insulation should be at least 6 inches (15 centimeters) deep. Oak leaves, which don’t settle as quickly as other plants, are seen by some botanists to be the finest for protecting the plant over the winter. Make sure to save the leaves from your oak tree so that you may use them to insulate your hydrangea plant [source: Gertens].
Depending on where you reside, you should get your hydrangea ready for the winter. Make sure it happens after the plant has developed the buds for the following year but before the winter weather has started. Most likely, this will occur in November [source: Gertens].
Many customers ask why their hydrangeas aren’t blooming. The primary reasons hydrangeas don’t bloom are incorrect pruning, bud damage due to winter and/or early spring weather, location and too much fertilizer.
There are hydrangea kinds that bloom on either fresh or old wood, or even both. Both new and old wood are the growth of the following year (spring), respectively.
- Consider that this year, you bought a Nikko Blue Hydrangea. For the next year, Nikko’s produce blooms in the fall. Your Nikko is therefore creating blooms this fall that will blossom in the spring.
- Therefore, you wouldn’t want to completely prune your Nikko Blue Hydrangea this fall while you are pruning your perennials. Pruning the Nikko Blue Hydrangea this fall would effectively mean cutting off your hydrangea flowers for the upcoming spring.
- The idea behind Endless Summer, a hydrangea variety that blooms on both old and new wood, is that the plant will set blooms this fall to blossom not only in the spring of the following year, but will also keep producing blooms in the spring of the following year to extend the blossoms into the summer.
- Once more, pruning your Endless Summer hydrangea in the fall would mean removing some of the flowers that would blossom in the spring.
The hydrangea’s plant tag will indicate whether it blooms on fresh wood, old wood, or both. It is typically preferable to wait until spring to prune your hydrangeas. As the plant grows, you’ll see stems that are fragile when bent and lack any leaves. Since these stems are dead and won’t produce any flowers, they should be clipped close to the plant’s base.
The second reason why your hydrangeas aren’t blooming is probably the weather. Buds of hydrangeas are extremely susceptible to cold. Therefore, it is a good idea to wrap your hydrangea for the winter if it is an old wood hydrangea. Keep in mind that old wood hydrangeas establish their blooms for the following spring in the fall. Therefore, you won’t have blossoms in the spring if the fall-produced buds are frozen in the winter.
You can wrap anything with regular burlap. Burlap should be wrapped around the plant and filled with mulch or leaves after the first hard frost and after the hydrangea’s leaves have dropped. In order for the buds to survive the winter and sprout the following spring, the plant receives insulation from this. Never wrap your hydrangeas in plastic. When warmer winter days arrive, the plant cannot breathe since plastic, unlike burlap, doesn’t breathe. As a result, the plant can heated to such high temperatures that it cooks within the plastic and perishes.
The second most frequent weather-related cause hydrangeas do not blossom is late spring killing frosts. We saw really chilly temperatures in April both this year and last year after beautiful spring days. When springtime temperatures drop below freezing, hydrangeas need to be covered with an old beach towel or sheet. Because of the temperature dip, there won’t be any blossoms.
The majority of hydrangeas require at least 3 to 4 hours of light per day to bloom. The best light is in the early morning, midday light is acceptable if it is dabbled light rather than beating sun, and afternoon sun is typically too hot. Check the plant label, though. Newer hydrangea cultivars are being created that can withstand more sun exposure time and sun intensity. A hydrangea in full sun will require much more watering than one in diffused light, so keep that in mind.
High nitrogen fertilizer should not be used to feed hydrangeas. Nitrogen is indicated by the first number on the fertilizer ratio. (The ratio stands for N, P, and K) For healthy leaves and general good growth, some nitrogen (N) is required; however, a ratio of 8-16-6 or any similar combination with a higher middle or phosphorus (P) value is preferred. The growth of roots and shoots is encouraged by phosphorus, which improves the blooming process.
Potash (K), the third element’s last quantity and the lowest ratio, is for plant hardiness. Because hydrangeas prefer acidic soil, they can be fertilized with fertilizers designed for such plants. Hydrangeas only require fertilizing twice a year, once in early spring and once in mid-summer. To avoid root burn, make sure the soil is always moist before applying a fertilizer.