Although hydrangeas are often mistaken for perpetual flowers, they are actually woody-stemmed shrubs that have a different root system than non-woody, soft-stemmed plants. Because of this, trying to root hydrangeas in water, as you might with certain houseplants, rarely works. For best results, plant hydrangea cuttings at the right time in potting soil.
Like growing roses, there are different ways to grow hydrangeas. When the year’s new stems have grown solid and robust, in late fall or early winter, “hardwood” cuttings obtained from hydrangeas can be rooted. However, it takes a long time for hardwood cuttings to root. 1 The majority of hydrangea producers in the industry employ “softwood” cuttings because they root more quickly and produce superior results.
Can hydrangea cuttings be rooted in water?
Rooting hydrangeas is not too difficult. While some people have succeeded in rooting them in water, many others (like myself) have never been able to do so.
The image to the right, which Susan Park Cole forwarded to us, shows how hydrangeas can be rooted in water. On sometimes, roots appear when an arrangement is left in water for a prolonged period of time. But in my experience, this approach more frequently fails than succeeds.
Can a dead hydrangea be revived?
Did you know you could revive hydrangeas that were on the verge of dying? I recently learnt a tip about cutting broad leafed flowers, and I was curious so I tried it.
I selected some hydrangeas from our backyard and combined them with some white blooms to bring inside. The pink and blue hydrangeas are a gorgeous mix, however they only bloomed for a day or two before wilting. The typical vase life of hydrangeas is six to ten days. They wilted, I think, because I picked them too soon.
What causes the blooms to droop? When they are unable to take in enough water through their stems to maintain the moisture of their blooms, big leaf hydrangeas wilt. There are several potential causes for this, including the presence of air bubbles, crushed woody stem ends, leaves still attached to the stem that suck moisture from the flower, and immaturity of the flower at the time of cutting.
However, once they have wilted, there is a technique to resurrect them. Under flowing water, at an angle of 45 degrees, trim them back by at least one inch. Keep the stem from being crushed and remove any leaves.
About two cups of hot water should be boiled.
*For your convenience, this article includes affiliate links.
Only a few inches of hot water should be in your container. Let the flowers stand.
The hydrangeas have fully recovered after three hours, which is very impressive.
Keep an eye on cut hydrangeas when they are for a special occasion so you have plenty of time to make any necessary repairs before the event. Reviving hydrangeas can take anywhere from one hour to overnight.
Only trim or choose hydrangeas that are fully open to avoid wilting in the first place. For the longest vase life and the best display, a flower should have been on the bush for a few weeks before it is cut, with all petals open and color completely developed. As you cut the hydrangeas, submerge them in water. After you have cut them again, give them the boiling water treatment to stop them from wilting.
Investing in silk hydrangeas is another method to guarantee that they will never wilt. You should definitely check out the lovely artificial flowers at PierOne because they are quite realistic. There, I discovered several lovely flowers that I use for all occasions.
We appreciate your visit and hope to see you again soon! Don’t forget to follow us on Instagram as well!
Sanitize Your Pruners
By scrubbing the handle and blades of your pruners with rubbing alcohol after dipping a cotton ball in it, you can disinfect them. By taking this precaution, you can protect your new plant from fungal diseases.
Take Cuttings
Cut a green, healthy branch that has not yet developed flower buds on a mature hydrangea plant about 2 inches below a leaf node. Skip the older, woodier stems. Overall, the cutting should be 6 to 8 inches long.
Trim the Leaves
With your pruners, remove all except the top two to four leaves from the cutting, being careful not to harm the stem. Leave a space between the cut and the main stem while chopping the leaves. As a result, the main stem’s integrity is protected.
Dip Stem Into Rooting Powder
Put some rooting hormone powder on the cut end of the stem. Although adding rooting hormone is optional, most growers feel that success rates are increased by doing so.
Prepare a Pot
The quantity of hydrangea cuttings you are starting should be taken into consideration when selecting a pot. A few cuttings should fit in an 8–10 inch terra cotta pot.
A seed-starting potting mix should be added to your pot, and it should be fully moistened. Vermiculite or coarse sand are two more sterile growth mediums that can be used.
Plant the Cuttings
Insert each cutting all the way up to the base of the remaining leaves in the growing medium. Wrap the stems in the mixture, moistening it well.
The potted cuttings should be placed in a clear plastic bag that is just loosely fastened, and they should be placed in an area that receives bright indirect light but not direct sunshine, which might bake the cuttings and make them rot.
When the potting mix feels dry to the touch, add moisture by keeping an eye on it. The soil used for planting needs to be regularly moist but not saturated.
Repot as Needed
Your hydrangea cuttings will grow new roots in a month. You can carefully transplant individual cuttings into their own pots filled with regular potting soil once they do and new green growth starts so they can continue to develop into larger plants. Alternatively, now is the time to put fully established cuttings into the garden.
The young specimens can now start receiving weekly waterings and being treated like mature plants.
Transplant into the Garden
Follow recommended spacing recommendations when adding fresh hydrangeas to the garden by leaving a 4- to 6-foot space between each plant. The new hydrangeas will develop into flowering bushes the next growing season if they are planted in the fall.
Tip
Big leaf hydrangeas (Hydrangea macrophylla) can have their blossom color carefully controlled by altering the pH of the soil with the addition of various soil amendments. Pink blossoms typically grow on alkaline soils, while blue flowers typically grow on acidic soils.
How can a hydrangea branch be rooted?
This approach is what my father wants, therefore I’ll mention it here. My two largest hydrangeas have a slight distance between them, but the others I have near the house are more closely spaced. I wish to fill in this space by burying a branch in the ground.
Continue to water as normal, but check often
If you are unsure, give it a little tug; if it resists, the weight has roots. Lift the weight up occasionally to check on the plant’s germination. Put more weight on it if it hasn’t already.
Once rooted, clip the branch from the “mother plant
After it has rooted, cut the roots apart so that the new roots can support the new plant entirely. The “mother plant” will still continue to provide the new branch with nutrients and water. You can uproot the new plant after a few more weeks if you like to (the multi-step approach is advised if you try to clip and transplant it at the same time because there is a chance the new roots won’t supply enough for the plant just yet). Unless both branches root, in which case I’ll probably give the second one away or move it to the front yard island area with other shrubs, I won’t carry out this step personally because I intend to leave the plant in this location.
Which is preferable, hydrangea roots in soil or water?
It won’t hurt anything if you don’t use any rooting gel or powder; it will just take a little longer. Cuttings from hydrangeas are incredibly simple to root, especially if you employ the “tent secret” that is revealed later.
The cuttings should be dipped in water, shaken off any excess water, and then placed into dry zip-lock bags along with some rooting hormone powder. Shake the bag until the rooting powder is evenly applied to the stems.
I typically leave the bag open for a few hours to let the moisture escape before sealing it with the remaining rooting powder to store it for later use.
Each cutting should be placed in a hole that has been made in the damp potting mix with a stick or pencil. For each cutting to be secured, gently press the dirt. Minimum distance between cuttings is one to two.
The objective is to bury at least one set of nodes, preferably two sets, in the ground, as can be seen in the photographs above. New roots will start to emerge from nodes and stems!
To propagate Hydrangea cuttings, there are a number of suitable rooting medium options. Both a decent potting soil and a seed beginning soil mix are suitable for usage.
Use of garden soil or soil mixes high in manure or fertilizer might cause cuttings to decay before they have a chance to establish root. Also excellent for propagation is a soilless mixture of 50% horticulture perlite and 50% peat moss (soak in water for 30 minutes before use).
Can cuttings be planted directly in the ground?
As long as you have properly prepared the cuttings, you can place them directly into the soil. According to Chick-Seward, “cut under a node at the bottom and above a node at the top.”
Remember that the soil must be able to drain well; as a result, if your garden soil is heavy clay, for instance, you will need to make a suitable potting mix. Fill tiny pots with one part compost to two parts grit with compost, advises Raven.
Dormant or dead, my hydrangea?
That mass of hydrangea sticks starts to produce new growth in the spring, either from the crown (or base) of the plant or from a cane. By about May, if you see no new growth at all, your plant may have suffered from “winter kill,” which was undoubtedly brought on by too-cold, freezing temperatures that were perhaps made worse by a drying wind.
The New York Botanical Garden’s Lorraine Ballato, a horticulture and educator, advises that you scratch some stems with your fingernail to be certain. A stem will show some green under the bark if it is alive. By the end of spring, if you can’t discover any living stems and no sprouts are emerging from the plant’s base, your hydrangea is dead. Remove the plant and try a more tolerant of the cold kind.
But keep in mind that the USDA hardiness zones measure a plant’s capacity for merely surviving, or whether its roots can endure the winter. According to Ballato’s essay for the National Garden Bureau, when it comes to hydrangeas, you also need to know if the stems can endure as many hydrangea kinds only bloom on wood that is a year old. What’s the sense of having a hydrangea if you can’t obtain blooms? To be sure, she advises asking a nearby nursery or extension office about the varieties of hydrangea that do well in your area.
How much time does it take hydrangeas to regrow?
The hydrangea, which blooms in the spring and summer, is classified as a shrub. Despite the fact that they can grow to be pretty enormous showpieces in your yard, even a beginner gardener won’t need to know how to grow hydrangeas because these stunning plants practically grow themselves. The hydrangea, which can grow up to 15 feet tall, fills in a space swiftly and frequently in just one summer. Hydrangeas are perennial plants that grow in hardiness Zones 3 to 7. Hydrangea blooms can be the main plant in your landscape because they bloom in the spring and frequently continue into the early fall.
How can hydrangeas be saved?
- First, give your stem a deep angle recut. This increases the bloom’s opportunity to absorb more water.
- Take out every leaf! It’s sad, I know. But the hydrangea’s foliage actually takes water away from the bloom itself. All of the water should be forced into the bloom.
- Water should be added to a big basin or your sink. Note: Although many people think warm water is preferable for this procedure, I have always used cool water. It probably works either way, though!
- Submerge the hydrangeas’ heads completely in water. Give them at least 15 minutes to rest! Even other people’s advice has led me to believe they should be submerged over night.
- Use paper towels to gently pat them dry after removing them from the water.
- Place within a vase of fresh water.
Did they recover? If so, congratulate yourself and take in the splendor of the natural world!
A broken hydrangea branch may be rooted.
Selecting a stem for cutting is the first stage in the process of rerooting hydrangea cuttings. For hydrangea propagation in the early fall, pick a stem that is at least 6 inches (15 cm) long, has no flowers, and is fresh growth. The stem of a new growth will be greener than an old growth. Be mindful that the entire shrub may be made up of new growth if you live in a colder region where the hydrangea dies back to the ground.
Take a sharp pair of shears and cut the stem off just below a leaf node after choosing a stem to propagate the hydrangea. A set of leaves will develop at a leaf node. The hydrangea cutting should have at least one more set of leaves above the chosen leaf node and be at least 4 inches (10 cm) long. Cut the cutting off the stem.
The cutting should then be stripped of all but the top set of leaves. There should only be two leaves left on the cutting. Crosswise divide the two remaining leaves (not lengthwise).
Use rooting hormone to coat the cutting’s tip, if it is available. Hydrangea shrubs can still be effectively propagated without rooting hormone, however it will boost your chances.
Place the clipping now in wet potting soil. Ensure that the plastic bag does not touch the hydrangea cutting’s leaves as you cover the pot with it.
Place the pot in a shaded area away from the sun. Every few days, check the hydrangea cutting to make sure the soil is staying damp. The cutting will be rooted and your hydrangea propagation will be finished in two to four weeks.
That is all there is to know about hydrangea propagation. You can begin propagating hydrangeas for your yard or for friends and family with a little care and work.