One of the joys of spring is the luscious aroma of lilacs. The lilac bush, which blooms in late April or early May with clusters of tiny purple flowers resembling bunches of grapes, is a common sight in most communities.
These are primarily common lilac shrubs (Syringa vulgaris). Kris Bachtell, vice president of collections at the Morton Arboretum in Lisle, described it as “grandma’s lilac.” It is widely known.
He said that there are hundreds of cultivated types. Although there are cultivars with magenta, pink, and white blooms as well, the majority bloom in hues of purple. They are all resilient and enduring.
Despite being widely cultivated, common lilac is difficult for some gardeners to grow. Even if some newer types are more resistant to powdery mildew, older ones are frequently deformed by it in the late summer.
The plants, which are native to rocky Balkan hillside soil, require full light and well-drained soil. An older lilac’s blooming cycle may end if nearby trees have grown to shade it.
Lilacs require frequent renewal trimming to reduce their size and thin them out. According to Bachtell, this necessitates the yearly removal of certain elder stems as well as dead wood. Lilacs also frequently sprout suckers from their root systems, which may need to be cut back.
The common lilac can simply be too much of a shrub for smaller yards because it is a large shrub or small tree that grows 8 to 20 feet tall and almost as wide.
Fortunately, Bachtell says, there are alternatives. “He said that several other lilac species are somewhat smaller. “They might be more disease- and shade-tolerant than grandma’s.
Meyer lilacs (Syringa meyeri) can reach heights and widths of 6 to 8 feet. Even though it thrives in direct sunlight, it can tolerate some shade. The flower clusters are smaller but very fragrant, and they emerge a little later than those of the common lilac. Autumn causes the leaves to become yellow. Although there are various cultivars, Palibin is the most popular.
One cultivar, Miss Kim, of the Manchurian lilac (Syringa patula), is primarily recognised. On a plant that is 5 to 8 feet tall, it bears delightfully scented light purple blossoms that turn light pink as they age. In the fall, the ruffled leaves become purple-red. Compared to other garden lilacs, the plant is a little more resistant to powdery mildew.
Hybrid lilacs that rebloom in the late summer or early fall do so less profusely than they do in the spring. Bloomerang Purple (Syringa ‘Penda’), Bloomerang Dark Purple (Syringa x ‘SMSJBP7’), and Bloomerang Dwarf Pink (Syringa x ‘SMNJRPI’) are just a few cultivars in the Bloomerang line. They are all smaller than typical lilacs, although cultivar differences in size should be noted on the label.
According to Bachtell, pruning should be done in the first week or two after the spring shrub has stopped flowering if it’s necessary to keep a lilac untangled and at the right size. Pruning in the winter will destroy buds that might otherwise develop fragrant blooms since lilacs bloom from buds that were formed the previous year.
How can the height of a lilac tree be decreased?
Cutting off the tops of stems that have grown out of control is frequently insufficient when pruning lilacs. It is typically preferable to remove the entire stem. The best way to trim lilacs is with clippers. To avoid spreading and promote later blooms, remove spent blossoms right down to the stems. Three-quarters of the branches should be pruned. Remove any shoots that are emerging from the main trunk and are growing close to the ground. Lilacs within the inner branches may need to be trimmed in order to increase air flow or let more light through.
However, it may be essential to prune the entire bush or tree to approximately 6 or 8 inches (15-20 cm) above the ground if lilac shrubs are already too big or starting to look unpleasant. Remember that it takes around three years for flowers to grow after the entire bush has been removed, so you might have to wait.
Can lilac be pruned to remain small?
Lilac bushes (Syringa) are a beautiful addition to any homeowner’s yard, however you might be curious as to how big you can keep a lilac shrubs. Lilacs are frequently left to grow on their own in USDA plant hardiness zones 2 through 7. But it is both feasible and wise to take care of lilacs and make sure they maintain a manageable size.
Due to their extreme hardiness, lilacs can grow naturally with little particular care. Lilacs eventually restrict their bloom production to the newest branches at the top of the plant as they ripen, though. Lilacs can reach a height of 15 feet without proper pruning, and they often have a width that is equal to their height. Without adequate maintenance, they can easily take over a garden or yard.
Can you cut lilacs short?
Keep in mind that there are new dwarf types of lilacs available, such as the repeat blooming “Boomerang,” that tend to stay much shorter in height and can easily be kept shorter than 6 feet tall with yearly pruning.
How far can I prune the rear of a lilac bush?
Older lilacs only bloom on the tallest branches and can have stems as thick as small trees. Fortunately, rejuvenation pruning can bring back a lilac that has been dead for around three years. There are two options available to you.
Using the “third” method is a less harsh way to pull an out-of-control lilac back into shape. For three years in a row, completely remove a third of the oldest branches from the tree. The thickest stems should be removed first. Pruning overgrown lilacs is simplest in the early spring before the branches start to leaf out, even if you’ll lose some blossoms for the current season. Your overgrown lilac should consist primarily of new shoots after three years of consistent pruning. After the plant starts to bloom all over, you may start doing routine maintenance pruning.
You can take the dramatic action of pruning back the entire plant to 6 to 8 inches above the ground in the early spring if you don’t like the way your old lilac looks or you just want a quicker solution. To encourage new development, fertilise the plant with compost or a balanced fertiliser. Throughout the growing season, new shoots will appear; allow them to continue to develop over the summer. The following spring, start cutting the spindly growth while keeping the healthiest shoots and keeping an eye on the plant’s shape. By pruning the remaining shoots to just above a bud, you can promote branching. After this, continue with routine maintenance pruning.
How do you stop lilacs from growing too far?
What a soggy week it has been. However, things may be worse, so we should take a moment to be grateful for what we do have. Look around and discover what lessons nature may teach us while we’re doing that.
Q. Seven years ago, I planted three lilac bushes. The reason I have a problem is because they send out these shoots from very close (about 5 or 6 feet away), ruining my landscaping. How do I put a stop to these runners? They lift up my mulch and tarp despite my clipping and pulling. I work to maintain them tall and unbranched. Newburgh’s Frances P.
A. To expand their total size, French lilacs send out their runners. Installing barriers that extend at least 6 inches into the ground should stop lilacs from encroaching on your garden beds. A polymer-based barrier with steel or metal edging is an option. There are numerous products available. You can spray “sucker stopper” on the already-existing runners, or you can just keep cutting and pulling up the existing runners until they are gone. After you install the barrier and finish eliminating the last of the suckers, you should be free of runners for some time. One variety of lilac—the Miss Canada lilac—doesn’t produce as many runners as others (Syringa x prestoniae).
A. We recently planted a hydrangea with crimson blooms. It appeared to be flourishing, but now we can see that the new leaves, which are largely on the top of the plant, are yellowish. Can you assist us in determining the issue? A Ballos
Iron chlorosis can affect big-leaf hydrangeas (Hydrangea macrophylla). Iron chlorosis is more likely to occur in plants growing in high pH soil because iron becomes less accessible as pH rises. Iron chlorosis is a condition that appears on new leaves, as opposed to nitrogen shortage, which manifests as yellowing of old leaves.
The soil can be amended with iron to treat iron chlorosis. Utilizing a chelated iron supplement is the most effective way to do this. One of these items ought to be available in a garden centre, the garden area of a hardware shop, or a mass merchant. Observe the instructions on the packaging closely. In a few weeks, you should start to see progress.
You will probably need to reapply the chelated iron product annually or whenever symptoms return as long as the soil pH stays high. Iron chlorosis can be permanently treated by adding aluminium sulphate to the soil to lower the pH or by mulching the soil with acidic organic materials like pine bark. The issue may be that your hydrangea’s red flower will turn blue as the pH of the soil changes. You’ll eventually get a good balance.
Q. The horseradish root that I grew last year is starting to come out of dormancy. Unfortunately, I lost the planting’s care, feeding, and harvesting instructions. Could you please help? Thanks a lot. Swan Lake, Dennis H.
A. Growing and caring for horseradish is not particularly difficult. In fact, some advise ignoring it altogether until harvest. Although it is a tough plant, I’m not sure if I would completely overlook the horseradish. You seem to have a well-established plant. There isn’t a lot of attention required. Horseradish does not require a lot of fertiliser, so keep it moist during the hot summer months.
You can either harvest your horseradish in the early spring or the fall after the first frost. When you’re ready to harvest it, dig as deeply as you can around the horseradish plant before using your shovel to gently take the horseradish root out of the earth. Replant some of the baby roots that have been broken off in the earth. Ground horseradish can be made using the remaining horseradish root.
Raising horseradish is relatively simple to undertake and may be a delightful and satisfying endeavour if you like it.
Make careful to leave the leaves on your floral bulbs after they’ve finished blooming until they turn yellow (6-8 weeks). If the leaves don’t remain in place long enough to create food to make up for the strength lost during flowering, flower production the following year will decrease. This time of year, bulb-tone or bone meal can also be used to feed the bulbs.
Zones:
The majority of lilac types can withstand cold temperatures in zones 3 to 8, although others, like Scentara Double Blue, can (S. hyacinthiflora). There are some cultivars that don’t require a winter chill, like as “Lavender Lady” (S. vulgaris), which is heat tolerant to zone 9. The majority of others do need a wintertime period of cold and dormancy.
Height/Spread:
The common lilac, Syringa vulgaris, reaches heights of 12 to 15 feet and widths of 10 to 12 feet. The majority of dwarf types are smaller and reach maturity at 4 to 6 feet tall and 3 to 7 feet broad. Syringa reticulata, often known as the Japanese tree lilac, grows up to 30 feet tall.
Bloom Time:
The majority bloom in late May, however there are new re-blooming kinds, such the Bloomerang series, as well as early spring, mid-spring, and late-season blooming variants.
Color:
The common lilac (Syringa vulgaris) has grey to gray-brown bark, purple blooms, and dark gray-green to blue-green foliage (with no fall colour change). But there are actually seven recognised hues for lilac flowers: white, violet, blue, lavender, pink, magenta, and purple, with several variations of each hue.
Other:
True lilacs, such as the California, mountain, and wild lilacs, are truly members of the genus Ceanothus. Butterfly bushes are frequently referred to as summer lilacs, especially sterile and non-invasive varieties.
Do you know about a dwarf lilac bush?
The Korean Dwarf Lilac, often known as the Meyer Lilac, is one of the most well-known of the small shrubs. This small plant is an attractive tiny shrub that is about 4 feet (1 m) tall and 5 feet (1.5 m) broad. It accepts shearing nicely and yields dark violet flower panicles that are 4 inches (10 cm) long.
Other kinds consist of:
- The Korean lilac variety Palibin is renowned for its hardiness down to USDA zone 3.
- Josee is a petite lilac with lavender-pink blossoms that can reach heights of up to 6 feet (2 metres).
- Tinkerbelle is an early bloomer with panicles that are a deep crimson colour and have a spicy aroma.
- Boomerang is an additional plant to take into account when planting dwarf lilacs. Its shape is 4 by 4 feet (1 x 1 m), it produces many blossoms, and its leaves are smaller than those of other lilac bushes.
Can you trim back lilacs to the ground?
The lilac tree will resemble nothing more than a twig in the garden by the end of September. It shouldn’t be reduced to the ground, though. Despite the fact that lilac trees are known for their resilience, it will likely take several years before you see blossoms again because you cut off all the blossoming growth.
If your lilac tree is more mature and unruly, it may require more aggressive pruning and some chopping back; just make sure that it doesn’t take up more than a third of the tree.
Can you grow a tree out of a lilac bush?
You require a little tree to serve as the garden’s centrepiece. Instead, pick a shrub and utilise basic pruning methods to turn it from a bush into a lovely tree. You can produce a unique plant that adds a touch of class to your yard when you prune a shrub into a little tree. For this method to work, you don’t even need to be an expert in plants or good with pruners.
The greatest shrubs to grow into trees are those that don’t normally produce a lot of suckers from the roots (suckers). Numerous varieties of shrubs, from floral beauties to shrubs with fall colour, are included in this group. Lilac, flowering quince, panicle hydrangea (Hydrangea paniculata), and spring-blooming star magnolia are some examples of flowering shrubs that can grow into trees (Magnolia stellata).
Many berried bushes grow into lovely little trees that provide the garden winter appeal. Pyracantha, Siebold viburnum (Viburnum sieboldii), and sea buckthorn are members of this group (Hippophae rhamnoides). Another excellent shrub to grow into a small tree is cotoneaster. Choose upright cotoneaster cultivars like Cotoneaster divaricatus or Peking cotoneaster (Cotoneaster ludicus) for the best results.
Sucker-producing shrubs are the most challenging to grow into trees. These suckers typically grow in small thickets when left to their own devices. Elderberry, chokecherry, and red twig dogwood are shrubs that can produce thickets. These shrubs can be trained to grow into tiny trees; however, it could require a bit more work.
Pruning suckering shrubs into multi-stemmed trees, where you choose a number of upright stems to act as trunks, is an option. For a beautiful multi-stemmed little tree, try the bottlebrush poinciana or pineapple guava in warmer climates. Consider witch hazel, serviceberry, or imitation orange in regions with chilly winters.
Smaller plants are simpler to teach when selecting shrubs to grow into trees. Gardening isn’t just about growing bushes into trees right away. It takes years to complete the process. Start with a plant that is around a year old if you wish to train your shrub into a tiny tree with a single trunk. One to two gallons may be used for a container. When grown as a multi-trunked tree, more mature shrubs produce better results.
Prior to planting, decide which stem will serve as the tree’s trunk. Remove branches from the shrub’s bottom third after planting. Place a sturdy stake next to the main stem, such as a tree stake or a chunk of rebar. On a tree with multiple stems, place a stake for each one. Fix the stem to the base with a tie. Rub out or trim any little sprouts that develop along the trunk as the shrub grows.
Remove lower branches each spring so that the trunk makes up one-third of the tree’s height. Till the tree reaches the desired height, repeat this technique every spring. Then, reduce the canopy to three to five major branches, then prune those branches back by three to five inches to promote branching. Thin the canopy as necessary and cut off any branches that sprout along the trunk to maintain your shrub-tree.