Depending on which group the plant belongs to, the timing and extent of pruning are determined:
Advice on Pruning for Group 1:
- As the days get shorter and the weather gets colder in the late summer and fall, buds for the following year’s blooms start to form.
- Typically, removing dead, diseased, or damaged branches is all that is required to preserve shape, size, and a healthy plant. Otherwise, gentle pruning ought to be practised.
- In the summer, trimming should begin as soon as flowering ends, but no later than August 1. Pruning should not be done in the fall, winter, or spring because you risk removing fresh buds.
- Tip-pruning the branches in the spring as the leaves begin to appear can promote more numerous, smaller flower heads as opposed to fewer, larger flower heads.
Advice on Pruning for Group 2:
- On the growth of the current year, flower buds form.
- Early in the spring, as the leaves are starting to emerge, prune.
- Just above a node, prune branches back by half to a third.
- After that, prune any fragile or spindly branches.
- Minimal trimming encourages huge, strong bushes with many of tiny flower heads in H. arborescens. Hard pruning between 12 and 18 inches from the ground, or even all the way down, will result in fewer but larger flower heads that may flop if unsupported.
- For H. paniculata, remove the surrounding smaller wood while leaving the larger stems in order to establish a sturdy foundation.
Pruning may be connected to flower head size. Shoots will grow more vigorously and flower heads will be bigger and fewer with more rigorous trimming. Smaller but more numerous flower heads may result from less aggressive or tip pruning.
Consideration of hydrangeas’ mature size is the best piece of advise. Place them in a location where they won’t outgrow and won’t need a lot of pruning to keep them in check. Hydrangeas don’t need to be pruned precisely or often; as long as dead wood is removed, they will remain healthy and continue to develop and bloom.
How far back can hydrangeas be pruned?
Remove up to one-third of the older living stems from the hydrangea each summer, cutting them all the way to the ground. The plant will recover as a result. Before the end of July, if required, prune back the plant to regulate its growth and give the buds time to grow. Usually, the plant grows back to its previous size right away.
Can I prune a hydrangea that is out of control?
Hydrangea bushes do not require pruning unless they are overgrown or ugly. Spended flowers (deadhead) can be safely removed at any time. However, there are a few deadheading pointers to remember for the best outcomes. Aim to just trim down to the last healthy bud or try to keep cuts above the first set of huge leaves. This guarantees the security of any budding blossoms for the upcoming season.
Cut stems all the way to the ground when pruning hydrangea shrubs that have grown out of control. Although it could postpone blossoming the following season, this helps the plants recover. All hydrangea varieties benefit from occasional trimming, but different varieties require different hydrangea pruning care, so it’s crucial to know what kind you have.
What results from pruning hydrangeas?
Mophead hydrangeas and lacecap hydrangeas, commonly known as bigleaf hydrangeas (Hydrangea macrophylla), are pruned using the same technique.
With its broad, roundish heads of huge petals in colours of blue, pink, green, and white, mophead hydrangeas are a popular choice for gardens. They are therefore a popular shrub option for cottage garden ideas and are also effective shade-giving bushes.
Small blooms in the centre of the bloom and a border of bigger petals on the outside help identify lacecap hydrangeas.
The experts at Thompson & Morgan suggest that in order to winterize hydrangeas, “it’s better to leave the faded blooms in place over the winter to safeguard vulnerable new buds from frost damage.”
Early in the spring, while pruning lacecaps and mophead hydrangeas:
- To promote new growth that will produce better blooms, remove one or two of the plant’s oldest, weakest stems at the base.
- Just above a pair of buds, carefully remove any old flowerheads using secateurs.
- Don’t remove any of the blossom buds, please.
- Cut the stems down to the plant’s root system if the bigleaf hydrangea shrub has been neglected and has a lot of overlapping, tangled branches. The hydrangea won’t blossom until the next year, though.
How should hydrangeas be pruned properly?
In the late winter, early spring, or just above a big bud known as a heading cut, trim back stems. The flower heads of these plants have a conical form. I wait to prune these until late winter or spring because I advise leaving the dried, tan flower heads on the plant to add some winter beauty to your garden. Favorite panicle hydrangeas include:
- H. paniculata ‘Bulk’ PP16, 812, Quick Fire
- (H. paniculata ‘Limelight’)
- Berry White (H. paniculata ‘Renba’ PP28, 509) first editions
Should I remove the brown blooms on my hydrangea?
Your hydrangea shrubs’ blossoms appear to be withering or turning brown. No need to worry—this is merely a signal that it’s time to deadhead—remove the blossoms from the plant.
Deadheading hydrangeas doesn’t cause any damage to the plants at all. Flowering shrubs stop producing seeds when the spent blooms are removed, and instead focus their efforts on developing their roots and leaves. You will be doing your hydrangeas a favour by deadheading because this strengthens and makes plants healthier.
How do I deal with an overgrown hydrangea?
Myers believes excessive trimming can be harmful, even though deadheading your hydrangeas can be beneficial for fresh growth. The energy held in the roots of “Annabelle” cultivars will all be used to produce above-ground growth, which is frequently insufficient to support the blooms, according to the author. The older stems can help sustain the new growth while a late winter 15 to 18 inch cutback will promote new development from the roots up.
Should I trim my hydrangea to prepare for winter?
It’s not necessarily necessary to severely prune your hydrangeas (Hydrangea spp.) before putting them to bed for the winter. Depending on the cultivar, hydrangeas can be grown in USDA plant hardiness zones 3 through 9, with each variation having different pruning requirements. Before you grab the shears, you must identify the type of hydrangea to know how far back to cut it for the winter.
Tip
Depending on the variety, hydrangeas can bloom on either old or new wood. Old-wood blooming hydrangeas need to be pruned just after the flowers fade in the late summer, whereas new-wood blooming hydrangeas should be pruned in late winter before new growth begins.
Can hydrangeas be pruned to maintain their tiny size?
One of the hydrangeas that blooms on new growth is called Annabelle. However, if you extensively prune them, they will still bloom. If you prune them too much, the new growth that develops may be weak and bow when the flowers are in bloom.
How do I prune my hydrangeas? is the query I receive the most on GardenLine. The big-leaf hydrangeas, Hydrangea macrophylla, have a difficulty in that if you cut them back too much, they don’t bloom as much the next season because their flower buds develop in the previous summer. On old growth, the majority of the well-known blue mophead and blue, pink, or white lacecap hydrangeas produce blooms.
However, some hydrangeas do not bloom on second year growth, which furthers the uncertainty. Both the white-flowered ‘Annabelle’ and the extremely hardy Pee Gee hydrangea, Hydrangea paniculata ‘Grandiflora, bloom on fresh growth. Several kinds, including “Penny Mac,” “All Summer Beauty,” and “Endless Summer,” bloom on both fresh and old foliage.
Let’s first discuss why you should prune these bushes before moving on to how. Unfortunately, the most common motivation for pruning a plant is to reduce its size. You’re destined to lose unless you’re cultivating a shrub or tree in a bonsai dish.
Plants should typically only be clipped to enhance appearance rather than regulate size. I’ll say it again because it’s crucial: Hydrangeas should be clipped to enhance look rather than regulate size. The mature hydrangea shrub is an immovable object. A big leaf hydrangea will grow back the following season if you prune it one year. Replace your larger growing variety with one that is genetically engineered to stay short if you wish to keep them little. A few types are recommended later in this article.
Many lacecap hydrangeas flower on growth from the second year, thus they should be treated similarly to mopheads. For illustrated pruning instructions, download the pdf document found at the end of this post.
Pruning instructions for lace-caps, mopheads, and big leaf hydrangeas are as follows:
1. When the plant has started to emerge from dormancy in the spring, prune. You can tell which canes are alive and which are dead at this time of year.
2. Start by cutting all dead canes down to the ground and eliminating them. In order to avoid being tempted to leave unsightly, six-inch-tall stumps because you can’t reach to cut them any shorter, it is better to do this while seated close to the plant.
3. After removing all dead canes, assess what is left. If you still have a lot of surviving stems and some of them are older than three years, cut the oldest canes again at ground level and eliminate a third of them. New growth will be encouraged by this. Skip to step #4 if the plant is not overcrowded with numerous older stems.
4. Trim any remaining faded flowers to thin the plant. Working from the top down, trim the remaining canes back by stopping and making the cut just above the first or second pair of buds you reach. Some canes will be cut very little or not at all when using this top-down strategy, while others will only contain surviving buds close to the base of the plant, meaning you’ll be chopping off a significant portion of that stem.
5. After that, back up and inspect the plant. If there is a stem that is noticeably higher than the others, you can cut it to make it more in proportion with the others if you prefer the way it looks. Remove any curved, frail-appearing branches that trail on the ground.
6. Bear in mind that any green buds you remove could later on in the summer bloom. Do you like more flowers or a cleaner plant? Keep in mind that you may always cut those flowers to make bouquets, which would help the plant look better later in the year.
7. Prune Infinitely Summer and other large-leafed hydrangeas that similarly bloom on fresh growth. Cutting these plants short results in fewer flowers because they bloom on both new and old wood.
8. Do you want them to be small? Let it go. Plant “Mathilda Gutges,” which is my favourite hydrangea, as well as “Hortensis Compacta,” the diminutive “Pia,” and “Pink Elf.”
Hydrangeas like the one on the right, called “Mathilda Gutges,” are suitable for perennial gardens and foundation plantings because they don’t grow much higher than four feet. The hydrangea “Ami Pasquier” on the left can reach heights of over five feet and should be planted in an area where it will have room to develop.
‘Pee Gee’ hydrangeas can be pruned in a variety of ways. By pruning deadwood and one-third of the smaller lateral branches each year, some people help them grow into little trees. Remove these twigs, leaving just the larger, upright stems, and the plant will grow taller, resembling a miniature tree with many stems. Cut out any crossed branches or those that are growing toward the centre of the plant rather than away from it after cutting the deadwood and those lower stems. Do this in the spring or late winter.
Pee Gee hydrangeas can also be pruned annually to a height of six inches to three feet. But because the top tends to grow thicker, the new stems that emerge will be dragged down by the weight of the blossoms. Pee Gee hydrangeas should generally be planted in areas where they have the potential to grow huge. Consider the diminutive oak leaf hydrangea, Hydrangea quercifolia ‘Pee Wee, if you want a white flowering shrub that stays small.
If Annabelle hydrangeas are pruned short, the stems will bend under the weight of the flowers since the fresh growth is weaker. These should be pruned similarly to mopheads, in my opinion.
Download this pdf of instructions with graphics to bring pruning knowledge into the garden. how to prune hydrangeas.pdf
Cut back these shrubs in late winter before new growth begins
Shrubs that flower on young wood typically start blooming later than old-growth bloomers, beginning in June and continuing until the first frost, because they need to grow and set buds the same year that they bloom. As long as you avoid trimming when the flower buds are opening, these shrubs are understanding if it is not done at a specific period.
1. Trim the flowers all the way back for larger blooms.
These bushes can be completely removed from the ground in late winter or the beginning of spring. If cut severely like this every year, smooth hydrangeas will produce much larger flowers, but many gardeners prefer smaller blooms on stronger stems.
2. Maintain an old growth foundation to lessen flopping
Especially after watering from above or after a heavy storm, the branches of some hydrangeas frequently topple over from the weight of their blooms. Cutting the stems to a height of 18 to 24 inches will help to reduce this flopping by creating a strong framework for fresh growth.
Janet Carson is the University of Arkansas Cooperative Extension Service’s horticulture specialist.
Receive our most recent advice, training, and tutorial videos in your inbox.