All lilacs should generally be clipped right away in the spring after they have finished blooming. Lilacs set their flower buds for the following year immediately after the current year’s flowers have faded, therefore trimming later in the summer or fall will result in the removal of most or all of the blossoms for the following year. The larger common lilacs as well as the shorter or more “shrub like” cultivars are all subject to this timing guideline. While the “when” of lilac trimming is rather simple, the “how” is a little more difficult. For the time being, we’ll refer to lilac pruning as either maintenance pruning or rejuvenation pruning to keep things simple.
How are lilac bushes pruned for the winter?
Cutting off the tops of stems that have grown out of control is frequently insufficient when pruning lilacs. It is typically preferable to remove the entire stem. The best way to trim lilacs is with clippers. To avoid spreading and promote later blooms, remove spent blossoms right down to the stems. Three-quarters of the branches should be pruned. Remove any shoots that are emerging from the main trunk and are growing close to the ground. Lilacs within the inner branches may need to be trimmed in order to increase air flow or let more light through.
However, it may be essential to prune the entire bush or tree to approximately 6 or 8 inches (15-20 cm) above the ground if lilac shrubs are already too big or starting to look unpleasant. Remember that it takes around three years for flowers to grow after the entire bush has been removed, so you might have to wait.
How much can lilacs be pruned back?
Cutting no more than a third of the stems from a shrub should be the general guideline when pruning it. While a result, the plant will continue to thrive and grow new stems as the old ones bloom. Your aim is to grow a lilac bush with between eight and twelve stems, all between one and two inches in diameter, and of varying ages.
Prune Unsightly Features
Pruning should start with the removal of diseased, dead, and pencil-thin suckers and twiggy growth. Trim these all the way to the ground. These stems are typically handled by pruning shears or loppers.
Remove Any Stems Thicker Than 2 Inches in Diameter
By routinely removing entire old stems, you can keep your lilac from growing too tall. Removing only the tops of lengthy stems might cause the plant to take on an unusual, unnatural shape. A pruning saw could be essential for stems that are quite large. It can be difficult to handle thick lilac stalks.
Prune Remaining New Stems
Pruning the remaining new stems to an outward-facing bud will encourage your lilac to fill out more and develop a shrubby appearance. This entails trimming just past buds that point away from the plant’s core. A denser shrub will result from this technique’s increased branching.
When do lilac bushes need to be pruned?
Then climb your ladder and trim down all of the branches and the spent lilac flowering heads by a few feet. This will make the bush more even. Remove any unhealthy portions as well by pruning.
After blooming the following year, trim a further third of the oldest branches. And trim back the final group of eldest branches in year three. Your plant will be rejuvenated by the three years of trimming out the old wood. Ideally, you’ll have fresh, bushy growth closer to the ground as well as blossoms that you can cut or smell without using a ladder.
Rhododendrons should have their wasted flowers removed every year once they have faded. Just the flower heads, and not the leaf stalks, should be snapped off. You can revive elderly shrubs that have become spindly by giving them a lot of trimming. In order to avoid interfering with the development of flower buds for the next year, the best time to prune these plants is right after flowering (late spring).
Does new or old wood produce lilac blooms?
What specifically prevents these traditional plants from blooming? Instead of focusing on just one theory, consider a number of potential causes for this issue, including (in addition to illnesses and pests):
- Pruning when it’s not necessary
- The flower buds die in the cold
- placing your lilacs in the incorrect location
- The shrub in question either isn’t old enough to generate flower buds or is too old to do so.
You’ll see that while reasons one and three point to the gardener having done something incorrect, arguments two and four point to no one having done anything incorrect.
Why does it matter what time of day you prune? Shrubs called lilacs produce flowers on rotting wood. This indicates that the flower buds for the upcoming spring’s blooming season have already been formed on the growth from the previous year. When this growth is pruned, the flower buds and, consequently, the blooms they would have produced, are lost. Because of this, it is recommended that you clip lilac bushes as soon as they finish flowering (before they have set bud for next year).
Click Play to Learn How to Prune Lilacs
Despite being a relatively cold-hardy plant, the common lilac (Syringa vulgaris) can suffer harm if a hard frost or freeze occurs just as the flower buds are about to open. As a result, that year’s flowers are lost. You can’t really stop it, so simply accept the loss and look forward to the blossoming twice as much the next year.
Where you put your lilac shrub matters a lot, just like it does with most other plants. Lilacs require full sunlight and prefer well-drained soil. If you made a mistake when you first put your plants on either of these fronts, you can be paying for it today by your lilac not blooming. However, there is a simple solution to the issue: move your shrub to a more favourable location.
Regarding the fourth reason, be aware that although though these bushes have a long lifespan, they do tend to produce fewer flowers as time passes. Implementing a rejuvenation pruning on your lilacs will solve this issue (do not expect immediate results, though). Sometimes, though, the converse is true: your plant may be too young to bloom. Allow some time.
Does pruning lilac bushes harm the flowers?
Your lilac bush will produce more blossoms the following year if you remove the dead flowers. When cutting off your flowers, it’s crucial to only remove the wasted blooms—don’t worry about any nearby stalks. Simply concentrate on the spent bloom’s stem if you can see the two fresh shoots that will grow into blooms the following year. Avoid cutting off the blossoms for the following year!
I now wish to stimulate a second flowering on my dwarf Bloomerang, which ought to happen in late summer or early fall. In order to produce more new growth and blooms during the second bloom season, the spent spring blossoms should be pruned off. A small amount of fertiliser made specifically for woody plants, which I could also use, will help encourage the shrub to bloom once more.
What distinguishes a lilac bush from a lilac tree?
Lilac bushes (also known as shrubs) are characterised by their numerous woody stems that emerge from the plant’s base. In contrast, the trunk of the majority of lilac trees is the only woody stem. However, your neighbourhood garden centre might also sell shrub lilacs that have been grafted onto a single stem to give them the appearance of miniature trees.
The choice between a lilac tree and a lilac bush is typically determined by the amount of space available. Lilac bushes come in a range of sizes and can be placed in more compact areas of a garden. A lilac tree requires space to reach heights of 20 feet and widths of 15 feet. Both require sunlight to bloom well.
Are dead lilac blossoms to be removed?
The removal of spent flowers to encourage new blooming—deadheading—is a crucial part of lilac maintenance. Lilacs should be deadheaded as soon as the flowering is finished to allow the plants to grow robust, healthy buds that will flower vivaciously the following year. According to the University of Minnesota Extension, you can use a hand pruner, but larger plants could require a hedge trimmer. Only the dead blossom should be removed; the plant should still have two leaves.
According to the Chicago Botanic Garden, you should prune lilacs at the same time as you deadhead them since they set the blossoms for the following year quickly after flowering. By doing this, you can prevent damaging or removing the developing buds. Three to four years after planting, you should start pruning lilacs. It might be necessary to trim back overgrown lilacs to just a few inches above the ground. Winter is the ideal time to complete this. In this instance, it will take the shrub one or two growing seasons to start blooming once more.
How should a lilac bush be cared for in the autumn?
Did you know that the National Gardening Bureau has designated 2022 as the “Year of the Lilac”? They have a sweet, eerie aroma and are among the easiest shrubs for your landscaping to maintain that bloom in the spring. Find out how to plant, nurture, and prune your lilacs.
About Lilacs
Syringa vulgaris, or common lilac, is prized for its tenacity, dependability, and scent. Lilacs are so hardy that they can live for more than 100 years and frequently outlive the houses they were planted near.
This tiny, multi-stemmed deciduous shrub (or tree) has approximately ten canes and blooms at eye level. The height of a common lilac can range from 8 to 12 feet, depending on the cultivar. The aromatic flowers attract butterflies and make good cuttings.
There are lilac types that come in white, cream, and even pink and yellow, though the blooms are typically lilac/purple in hue (ranging from very pale to extremely dark). Flowers can be solitary or double in number.
Lilacs bloom in northern states from mid- to late spring for around two weeks. However, there are lilac varieties for early, mid, and late seasons that, when cultivated together, guarantee a consistent bloom for at least six weeks.
Lilacs do best in soil that is fertile, humus-rich, well-drained, and neutral to alkaline (at a pH near 7.0). Add compost to your soil to improve it if it is in bad condition. (Learn more about adding amendments to the soil and getting it ready for planting.) Lilacs don’t enjoy having their feet wet and won’t blossom if they are kept too moist, so make sure the planting area drains well.
Lilacs should be planted in full sun, which is defined as having at least six hours of sunlight each day, for the finest blooms.
How to Plant Lilacs
- If you’re fortunate, a friend may offer you a sucker, or offshoot, of the plant’s root system. The sucker will first appear pitiful, but all you need to do is dig a hole, fill it with soil, and then insert the sucker. water next, and then wait. You’ll be rewarded with enormous, fragrant blossoms in 4 or 5 years.
- Lilacs purchased from nurseries can also be planted easily. If the plant was cultivated in a container, spread its roots out as you plant it; if it was balled or burlapped, gently remove the covering and any rope before doing so. Set the plant 2 to 3 inches deeper than it was while it was growing in the nursery and cover the roots with topsoil. in water Then add more topsoil to the hole to finish it.
- Depending on the kind, place multiple lilac bushes 5 to 15 feet apart.
- Apply a layer of compost under the plant each spring, followed by a layer of mulch to keep moisture in and weeds under control.
- If the weekly rainfall is less than 1 inch, water during the summer.
- If lilacs receive too much fertiliser, they won’t bloom. In the late winter, they can manage a few 10-10-10, but no more.
- Spread some lime and thoroughly composted manure around the base of your lilac bush once it has finished blooming. Remove suckers while you form the shrub by trimming it.
Pruning Lilacs
- Since lilacs blossom on old wood, it’s important to prune in the spring immediately following their bloom. You risk removing the wood if you prune later in the summer. A word of advice: It’s time to prune if your lilac flower clusters are getting smaller!
- After bloom each year, cut away any dead wood. Remove the oldest canes by pruning (down to the ground). Take out the tiny suckers. Reduce weak branches until a robust shoot remains. Reduce tall canes to eye level.
- Remove one-third of the oldest canes (down to the ground) in year one, half of the remaining old wood in year two, and the remainder in year three if your lilac is very old and in poor condition. Cutting the entire plant back to a height of approximately 6 or 8 inches is another option for elderly lilacs. Although it sounds dramatic, lilacs are remarkably resilient. This option’s drawback is that it takes some time for the hair to grow back. The lilac will grow back bursting with blooms, so there will be less work and more reward.
- It is important to understand that extreme trimming causes bloom loss for one to three years. For these reasons, a smart pruning programme gives the bushes yearly attention in an effort to avoid making dramatic and severe cuts.
The Syringa vulgaris kind of lilacs is the most widely grown and fragrant:
- Try the double magneta variety “Charles Joly” for an early bloom.
- Lilacs in the middle of the season include “Monge,” a deep reddish purple, and “Firmament,” a delicate blue.
- Miss Canada, a reddish pink, and Donald Wyman, a solitary purple, are two late-season beauties.
Syringa x hyacinthiflora, an early-flowering lilac cultivar, opens 7 to 19 days before those of the common lilac. Hummingbirds and butterflies are attracted to its fragrant blossoms.
The cutleaf lilac, a fragrant pale lavender, is one of the common lilacs that may flourish as far south as Zone 9. Common lilacs appreciate cold weather. The beautiful shrub Syringa patula ‘Miss Kim’ has light lilac-blue flowers that eventually become white.
There are tiny kinds for gardeners who simply don’t have the space for the conventional larger lilacs, particularly those in urban settings. Even in a container on your balcony or patio, they will grow.
- ‘Baby Kim’ has a lovely rounded shape, only grows 2 to 3 feet high (and 3 feet wide), and has purple flowers that draw butterflies. Hardiness from Zones 3 to 8 extended.
- Compact lilac ‘Little Lady’ (Syringa x) has dark pink buds that open to lilac-pink flowers and grows to be 4 to 5 feet tall and wide at maturity. Zones 2 to 7 are tough.
- Syringa vulgaris cultivars “New Age Lavender” and “New Age White” were developed for mildew resistance and are quite compact, growing from 4 to 5 feet tall and wide. Hummingbirds and butterflies are drawn to their fragrant blossoms. Zone 4 hardy.