Pruning is not typically thought of as one of the many gardening activities that may be done in the fall, despite the fact that there are several. It can be difficult to cultivate hydrangeas successfully in New Hampshire, and if you want your plants to blossom, there is frequently very little room for error in pruning.
Wait until Spring to prune hydrangeas
In New Hampshire, hydrangeas come in a variety of kinds, and each one has quite distinct growth patterns and pruning needs. Some plants only produce flowers on fresh growth, while others mostly produce flower buds on older wood. In any case, it is better to postpone all hydrangea pruning until spring. Hydrangeas, as with all other trees and shrubs, go dormant in the fall. Not much new growth is produced by them until the next spring. As new growth is more vulnerable to harsh cold at the location of wounds, plants that have been trimmed now run a higher risk of winter damage. Additionally, fall pruning may lessen the quantity of June blooms.
Considerations for pruning hydrangea species commonly grown in New Hampshire gardens
The gigantic blue mopheads or lacecaps known as bigleaf hydrangeas (Hydrangea macrophylla), which are familiar to most gardeners, form their flower heads at the tips of stems on old wood from the previous year. Although lower buds along the stem have the capacity to grow blooms as well, the hydrangea’s blossoming potential is decreased if those buds are died or damaged throughout the winter. Wait until new growth sprouts in the spring before pruning your bigleaf hydrangeas. Approximately 1/4 inch above the first group of live buds, prune the plant. A hint: the interior of living stems will be green, whereas the interior of dead stems will be brown. Cut completely dead stems flush with the base.
The three other hydrangea species that are frequently planted in Fresh Hampshire—oakleaf (H. quercifolia), panicle (H. paniculata), and smooth—all bloom on new growth. Before the emergence of the leaves in the late winter and early spring, remove wasted flowers and prune the plant to improve its general structure and habit.
In conclusion, there are a ton of other activities you can engage in to stay occupied in the garden during fall. Save the spring for hydrangea pruning.
When ought hydrangeas to be pruned?
Depending on which group the plant belongs to, the timing and extent of pruning are determined:
Advice on Pruning for Group 1:
- As the days get shorter and the weather gets colder in the late summer and fall, buds for the following year’s blooms start to form.
- Typically, removing dead, diseased, or damaged branches is all that is required to preserve shape, size, and a healthy plant. Otherwise, gentle pruning ought to be practiced.
- In the summer, trimming should begin as soon as flowering ends, but no later than August 1. Pruning should not be done in the fall, winter, or spring because you risk removing fresh buds.
- Tip-pruning the branches in the spring as the leaves begin to appear can promote more numerous, smaller flower heads as opposed to fewer, larger flower heads.
Advice on Pruning for Group 2:
- On the growth of the current year, flower buds form.
- Early in the spring, as the leaves are starting to emerge, prune.
- Just above a node, prune branches back by half to a third.
- After that, prune any fragile or spindly branches.
- Minimal trimming encourages huge, strong bushes with many of tiny flower heads in H. arborescens. Hard pruning between 12 and 18 inches from the ground, or even all the way down, will result in fewer but larger flower heads that may flop if unsupported.
- For H. paniculata, remove the surrounding smaller wood while leaving the larger stems in order to establish a sturdy foundation.
Pruning may be connected to flower head size. Shoots will grow more vigorously and flower heads will be bigger and fewer with more rigorous trimming. Smaller but more numerous flower heads may result from less aggressive or tip pruning.
Consideration of hydrangeas’ mature size is the best piece of advise. Place them in a location where they won’t outgrow and won’t need a lot of pruning to keep them in check. Hydrangeas don’t need to be pruned precisely or often; as long as dead wood is removed, they will remain healthy and continue to develop and bloom.
How should I handle hydrangeas in March?
Mophead hydrangeas and lacecap hydrangeas, commonly known as bigleaf hydrangeas (Hydrangea macrophylla), are pruned using the same technique.
With its broad, roundish heads of huge petals in colours of blue, pink, green, and white, mophead hydrangeas are a popular choice for gardens. They are therefore a popular shrub option for cottage garden ideas and are also effective shade-giving bushes.
Small blooms in the center of the bloom and a border of bigger petals on the outside help identify lacecap hydrangeas.
The experts at Thompson & Morgan suggest that in order to winterize hydrangeas, “it’s better to leave the faded blooms in place over the winter to safeguard vulnerable new buds from frost damage.”
Early in the spring, while pruning lacecaps and mophead hydrangeas:
- To promote new growth that will produce better blooms, remove one or two of the plant’s oldest, weakest stems at the base.
- Just above a pair of buds, carefully remove any old flowerheads using secateurs.
- Don’t remove any of the blossom buds, please.
- Cut the stems down to the plant’s root system if the bigleaf hydrangea shrub has been neglected and has a lot of overlapping, tangled branches. The hydrangea won’t blossom until the next year, though.
What occurs if hydrangeas are pruned too soon?
Consider when your hydrangea blooms to see if it grows on old wood. These shrubs typically start blooming in the early summer and stop by midsummer, however isolated blooms may continue into the fall. Late summer or early fall, when the days grow shorter and the temperature drops, these shrubs begin to create the bloom buds for the following year. Pruning should be done just as the flowers start to fade to limit the chance of eliminating these buds. The sooner the shrub recovers after bloom, the more and bigger flowers it will produce the next season.
1. Old blossoms should be taken out to tidy up.
Gardeners can remove any wayward or straggly canes at the soil level and prune wasted blooms just below the flower head to keep their plants looking clean.
2. Eliminate the oldest canes to increase vigor.
A hydrangea may produce lesser blooms as it ages and becomes woody. The shrub will remain healthy and continue to produce big, many flowers if a few of the oldest canes along the soil line are routinely removed. The same technique, which involves removing the tallest canes, can prevent a shrub from becoming too tall.
Watch a video on pruning bigleaf hydrangeas
Almost everyone is mesmerized by bigleaf hydrangeas’ mophead blossoms (Hydrangea macrophylla and cvs., Zones 49). And it appears that queries regarding pruning these flowering bushes are common among gardeners. Because they are shrubs, it is frequently assumed that they require pruning. Some gardeners believe that pruning their hydrangea will encourage it to bloom. Both of these ideas are incorrect. Bigleaf hydrangeas don’t require any pruning, and if you prune them, you risk removing the bloom buds you were trying to receive by timing your cuts improperly.
The flower buds on bigleaf hydrangeas are often found on growth from the previous season, which is known as “old wood.” You will be removing the flower buds if you prune them before they bloom. Pruning too early doesn’t stop the entire display; rather, it stops a large chunk of it for many newer types that really generate buds on both old and new wood. However, if your hydrangea isn’t blooming, improper pruning is frequently to blame. Just after the bigleaf hydrangea has finished flowering is the ideal time to prune it. The shrub will have plenty of time before winter to establish new growth and harden off.
This video will provide you with the knowledge you need to timing your cuts properly and pinpoint where to make them on the shrub if you feel that pruning your bigleaf hydrangea is necessary. Only hand pruners and possibly a pair of loppers to reach deep into the hydrangea will be required of you. Wearing safety eyewear is also advised. While trying to gaze down into the shrub, it is quite easy to poke your eye on a stem, even if you don’t think they are cool. A poke in the eye is also never appropriate.
Should hydrangeas be pruned back during the winter?
If and when you prune is the key to happy, healthy hydrangea flowers. Of course, fertilizing and offering the ideal environment have a lot to recommend them. However, if you don’t prune properly, your efforts will be in vain. Deadheading is not the same as trimming. Pruning refers to more drastic cutting to preserve shape or remove dead growth. However, feel free to discard spent blossoms or cut fresh ones to use in arrangements.
Hydrangeas can bloom on either fresh wood or old wood, depending on the species. The wood from which they blossom determines whether and when to prune.
Old wood-blooming hydrangeas do not require pruning and benefit from it. They’ll blossom more abundantly the next season if you leave them alone. But feel free to deadhead or gently thin. Just keep in mind that while new growth may appear, it won’t bloom until the following season. In our region, four different species blossom on aged wood. Additionally, they are not limited to the hues displayed here.
Climb using suckers. On your wall or trellis, resist the desire to remove the dormant growth.
The flower heads are more conical in appearance, and the leaves are large and resemble oak leaves. It’s a pleasant surprise for a hydrangea when its leaves turn reddish-orange in the fall.
They are very comparable to lacecap types, but smaller and with more compact leaves.
Pruning should be done in late winter or early spring on hydrangeas that bloom on new wood. Trim back to two feet to prune to shape. The next season’s blossoms are produced by strong, fresh growth that is encouraged by trimming. In our region, there are two types that bloom on fresh wood. They are also not restricted to the colors displayed.
Oakleaf variants are not included in cone-shaped blooms. Keep the blooms on throughout the winter to provide interest; even dried out, they are quite lovely.
regarded as a wild kind. They often have smaller blooms and leaves than Bigleaf variants and are completely white. They enjoy full sun and can grow very tall.
Knowing whether or when to prune now will help you avoid the disappointment of a hydrangea that doesn’t blossom. Don’t forget that a robust shrub will produce more gorgeous blossoms if it has well-draining soil and good organic fertilizer. Come on in, and we’ll show you where to go to develop your green thumb.
Can I prune my hydrangeas all the way down?
These hydrangeas are simple to manage because they bloom each year no matter how they are taken care of or treated. They can be cut down to the ground in the fall and will reappear the next spring with an abundance of blossoms. However, over time, this severe trimming might make the plant gradually weaker.
In March, what can I prune?
Pruning Trees and Shrubs in March Flowering shrubs that will bloom on the growth of the upcoming season should be clipped now. This includes shrubs like buddleia, late-flowering ceanothus, clematis, hardy fuchsias, hebes, and hydrangeas as well as those that begin blooming later in the summer.
How should I care for hydrangeas in spring?
You can prune hydrangeas paniculata and aborescens more severely without losing this year’s blossoms because they bloom on new wood. Although pruning is not necessary, if it is not done the plant will grow taller, with the majority of its flowers at the top.
Cut back to a healthy framework
Trim the previous year’s growth back to a strong framework that is between 30 cm and 60 cm high in the early spring. On each stem, prune to just above a pair of sound buds. For large flowers, prune back to the lowest healthy buds; less firmly for a more natural appearance or a higher plant.
Watch Monty Don describe the many hydrangea trimming techniques in spring:
When ought hydrangeas in the UK be pruned?
Each region may vary slightly, but in the UK, I prune my hydrangeas around late February. My hydrangeas have already sprouted new growth in February despite the fact that our region has frosts in March, which is a hint that I should prune them.
The appropriate time to prune each type of hydrangea is listed below. With the exception of the climbing hydrangea, which only requires a simple tidy-up and the removal of wasted flowers, all three of these plants require fairly comparable pruning techniques.
- Hydrophylla hydrangea (Mophead or Lacecap late winter prune)
- Psilocybe paniculata (Prune late winter)
- Petiolaris Hydrangea (ClimbingPrune directly after flowering in Summer)