Lilac plants don’t require a lot of food or fertilizer. A 10-10-10 fertilizer mixture applied yearly in the early spring is what we advise. (The amounts of nitrogen, phosphorus, and potassium, or NPK as they are popularly known, are represented by the digits 10-10-10 in the formula.) Early spring fertilization of lilacs with a high phosphorus solution encourages blossoming.
Coffee grounds and grass clippings are also excellent sources of nitrogen. Use in moderation since an excess of nitrogen in the soil can lead to subpar blooms. The ideal soil conditions for lilacs are slightly alkaline (6.5–7.0 pH), wet, and well-drained. The soil may become more alkaline by adding bone meal to it. Use Miracle-Gro Shake ‘n Feed Flowering Trees & Shrubs Plant Food in the spring if you decide to feed your plant. Last but not least, lilac plants dislike acidic soil. Epsom salts can be used to encourage blossoming while the plant is dormant.
Which fertilizer is ideal for lilacs?
Lilac bushes respond well to fertilizer made from bone meal. This is as a result of increased soil alkalinity. It is a simple natural plant food that the lilac may consume.
Lilac fertilization isn’t necessarily required until the first and second years after planting. To sweeten the soil and prevent too much acidity, they could be fertilized with superphosphate and limestone when they are planted.
You can exclude standard fertilizer mixtures if the soil has the right balance and has a lot of organic matter. The only bushes that will truly benefit from annual feeding are those planted in poor soil. When you do feed the plants, use a 5-10-10 ratio. Around the plant’s root zone, distribute 1 cup (237 ml) of granular food evenly, and then water the soil.
How can I increase the blooming of my lilacs?
Lack of sunlight could also be a factor in your lilac plant’s failure to blossom.
You can grow lilacs that don’t have blooms in a location that is either shadowed by other trees or something else. It won’t bloom, but it will live.
For the best blooming, a lilac bush needs at least 6 hours of direct sunlight per day. It can be relocated or the trees that shade it can be cut back.
Be patient because transplanting lilacs may cause a one-year delay in bloom. To ensure that sunlight penetrates the foliage, you may also need to thin the bush.
What promotes lilac bush growth?
3. Take the plant out of its pot and place it in the hole. Make sure the top of the root ball is about an inch or more above the soil surface.
4. Apply the soil mixture all the way around the root ball, pressing it down firmly.
5. Take a long drink.
6. Mulch the area you just planted to a depth of 2 inches, being careful not to pile mulch up against the base of the plant. This will help keep the soil moist and prevent weeds from sprouting by denying them access to sunlight.
How to Water Lilacs
After planting, monitor your plants frequently, and water them once or twice a week, or anytime the top inch of soil becomes dry. While watering, count to 10 to make sure you’re providing each lilac plant with enough moisture. (If the plant becomes too dry, the leaves will start to droop.) You can reduce watering to every other week once plants have been planted and have had a few months to establish themselves. Lilacs won’t require additional water during the second growing season or later unless there hasn’t been rain in your location for a month or more.
How to Feed Lilacs
Lilacs should be fed Miracle-Gro Shake ‘n Feed Flowering Trees & Shrubs Plant Food after they have bloomed in the spring to encourage the development of robust roots. This plant food is jam-packed with nutrients for your plants, including kelp, earthworm castings, feather meal, and bone meal. These ingredients nourish soil bacteria, which in turn break down organic matter into nutrients for your plants.
How to Help Prevent Disease Problems with Lilacs
Powdery mildew is the main problem with lilacs, especially common lilacs. What’s the best approach to prevent this? Purchase and plant lilac cultivars that resist powdery mildew (check the plant tag or online description). Lilacs benefit from being planted in areas with good airflow. This fungus disease won’t respond to spraying, and it will finally go away on its own.
How to Deadhead Lilacs
Be sure to deadhead young lilacs as they start to bloom (this could take a few years!). Deadheading involves clipping off faded flowers at the base as soon as they start to droop and fade. In response, the plant will use more energy developing new flower buds for the upcoming spring.
How to Prune Lilacs
Although the newer, smaller lilac kinds require less trimming than the enormous conventional lilacs, all lilacs will grow more effectively and bear more flowers with regular pruning. Here are a few possibilities:
- Cut an older lilac shrub to 8 inches above the ground in late winter (March or April), then let it grow out if it isn’t flowering despite receiving plenty of sunlight. The following March, choose 8 to 10 of the best-looking stems, and reduce them by half. Trim the remainder to the ground. The following year, new blossoms should appear.
- Selectively prune 1/3 of the branches all the way back to the ground each year to revive shrubs that aren’t flowering well instead of chopping the shrub all the way down.
- Cut back branches to reduce size as soon as the shrub’s flowering has finished.
What types of plants don’t like coffee grounds?
We understand that it feels nice to use your leftover morning coffee instead of putting it in the trash. The gardeners who write about it aren’t mistaken when they claim that it’s rich in elements that are good for the soil, such nitrogen, which is crucial for plant growth. Adding organic matter to your garden’s soil is generally a good idea because bacteria will eat it up and break it down into more nutrients the plants can consume.
However, even proponents of coffee-ground gardening express a few words of caution. They point out that because coffee grounds are so acidic, they should only be used for plants that also enjoy acidity, such as azaleas and blueberries. Additionally, the additional nitrogen boost from coffee grounds may slow the growth of fruits and flowers if your soil already contains a lot of nitrogen. These cautions, however, fail to mention one significant issue with used coffee grounds: the presence of caffeine.
How are lilac Fullers made?
Cutting off the tops of stems that have grown out of control is frequently insufficient when pruning lilacs. It is typically preferable to remove the entire stem. The best way to trim lilacs is with clippers. To avoid spreading and promote later blooms, remove spent blossoms right down to the stems. Three-quarters of the branches should be pruned. Remove any shoots that are emerging from the main trunk and are growing close to the ground. Lilacs within the inner branches may need to be trimmed in order to increase air flow or let more light through.
However, it may be essential to prune the entire bush or tree to approximately 6 or 8 inches (15-20 cm) above the ground if lilac shrubs are already too big or starting to look unpleasant. Remember that it takes around three years for flowers to grow after the entire bush has been removed, so you might have to wait.
What plants benefit from coffee grounds?
Roses, blueberries, azaleas, carrots, radishes, rhododendrons, hydrangeas, cabbage, lilies, and hollies are among the plants that like coffee grounds.
Use of coffee grinds on plants like tomatoes, clovers, and alfalfa is not advised. If in doubt, it’s probably safer to compost your leftover coffee grounds or look through our list of various applications for them!
Sun and shade
Bloomerang lilac trees need at least six hours of direct sunlight each day to grow and flourish. Although they can withstand little shade, they won’t grow as many blossoms.
Soil
Trees prefer alkaline, well-drained soil that is wet. Their roots may being damaged by wet soil. The right amount of moisture can be retained and the Bloomerang can be shielded from temperature changes by a thin layer of mulch.
Watering
The blooming season is when bloomerang lilac trees will require the most water. From spring through the end of bloom season, right before the first frost, water once every ten to two weeks. Two inches of water are required for your tree to receive moist soil that is down to 12 inches.
Water during prolonged dry spells the remainder of the year if the top three inches of the soil begin to totally dry up and if the leaves begin to wilt.
Fertilizing
Beginning the second year after planting, you can fertilize your Bloomerang lilac tree in the first few weeks of spring. Apply a lilac-specific fertilizer to your plants. These often contain more phosphate and potassium and less nitrogen. A good NPK value is 5-10-10.
Pruning
You don’t need to prune your Bloomerang lilac tree. Your tree will blossom once more regardless of whether it encourages new growth. If you choose to prune your tree, do it as soon as it blooms. The flower buds will be severed if it is done in the fall, winter, or before the first bloom. Trimming will cause the rebloom to happen a few weeks later.
How are aged lilacs revived?
The common purple lilac is a hardy, dependable shrub that can grow up to 20 feet tall. Unfortunately, the lower, shady sections of lilac shrubs typically lose their leaves as they get older. Large, overgrown specimens as a result are frequently leggy and ugly. Pruning can restore or rejuvenate old, neglected lilacs. Home gardeners have two alternative pruning techniques to pick from.
Cutting the entire plant back to within 6 to 8 inches of the ground in late winter is one method of renewing a huge, overgrown lilac (March or early April). A significant number of shoots will sprout during the growth season as a result of this aggressive pruning. Select a few sturdy, robust shoots to construct the shrub’s framework, keeping a few of them, and cut off all the others at ground level in the late winter of the next year. To promote branching, head (clip) back the retained shoots to just above a bud.
Cutting back the overgrown shrubs over a three-year period is a second method for pruning mature lilacs. In late January, start the process by digging up and removing one-third of the big, old stems. The following year, trim out half of the remaining old stems (again in late winter). Additionally, trim out some of the recent growth. Keep a few healthy stems that are evenly spaced apart and cut off the rest. In the third year’s late winter, completely remove all of the old wood. It is also necessary to thin the fresh shoots more. This pruning technique should enable you to take pleasure in blossoms every spring because lilac wood must be three years or older before it blooms.
Within a few years, with the right pruning, an old, overgrown lilac can be converted into a robust, appealing shrub. Pruning should be a frequent component of the lilacs’ management regimen after they have been revived. By cutting a few of the oldest branches every three to five years, the shrub can be kept strong and healthy.
(This article, which first published in the Sunday edition of the Lincoln Journal Star Newspaper in February 2005, has since been amended. Consult the Terms of Use for details on how to copy this content and use any images or visuals.)
What stops a lilac bush from blooming?
A. There are a number of potential causes for your lilac’s failure to blossom. Lack of sufficient sunlight is the main culprit. Lilacs (Syringa) should be planted in an area with at least six hours of direct, bright sunlight per day. They can withstand a wide range of moisture levels as long as they are grown in soil with good drainage.
If your lilac is clipped at the wrong time of year, it might not blossom for another reason. Lilacs bloom in the spring on the growth from the previous year, and soon after, they begin to form the buds for the following year. Within a few weeks of the plant blooming, pruning must be done simultaneously with the removal of the wasted flowers in order to prevent the removal of the buds for the following year. A late freeze can harm flower buds on types that bloom early.
Lilacs have a tendency to mature into overgrown, leggy shrubs with minimal foliage at the bottom. When this occurs, it might be required to prune them to within 12 inches of the ground in order to completely rejuvenate them. When the shrubs are dormant in late winter, this should be done. Lilacs benefit from this repair, although their blooming cycle will be hampered for at least one season. Lilacs can receive a rejuvenation pruning over a two-year period to stop the interruption of bloom cycles. Half of the shrub’s stems should be hard pruned the first year, and the remaining stems the following year.
Lilacs do not consume a lot of food. Excessive fertilization, particularly nitrogen fertilizer, can frequently promote luxuriant vegetative growth at the expense of flower development. A lilac’s failure to bloom could potentially be due to its proximity to turf that receives frequent fertilization.
How can you hasten the growth of lilacs?
Lilac bushes grow fairly quickly, with some types growing more quickly than others. Any way you look at it, lilac bushes are a fast-growing variety of shrub.
By ensuring that your lilac shrub receives adequate sunlight and is placed in healthy soil, you can hasten its growth. It’s important to carefully and moderately water the lilac bush.
In the spring, fertilizer can be applied to the lilac shrub to help it grow. You should be able to observe your lilac shrub growing quickly each year if you heed our advice.
How much water do lilacs require?
A traditional flower garden, outdoor space, or decorative pot should all contain lilac plants as they are a staple flowering shrub. Zones 3 through 8 are suitable for growing these fragrant shrubs, and they require very little maintenance. Lilacs need at least 6 hours per day of direct sunlight to produce their best flowers. Lilacs benefit from regular watering after initial planting, throughout active growth seasons (spring), and during prolonged dry spells. Lilacs are fairly drought tolerant once they are established.
It is advised to water your lilac plant once every 10 to 14 days from spring till blooming is finished. The ideal irrigation for lilacs is deep, infrequent watering. Make sure the planting space or container has good drainage. These plants don’t appreciate having their feet wet and won’t bloom if they are overwatered. By saturating air pockets with water and reducing soil oxygen levels, excessive water can strangle the lilac tree’s roots. The first indication that the lilac is overwatered is the plant wiggling.