As I indicated earlier, many growers like to cultivate a traditional tree shape, complete with a distinct canopy and trunk. However, F. lyrata tends to grow in a columnar or bushy shape when kept as a houseplant.
In the wild, F. lyrata does this on its own by losing its lower leaves and growing into its original shape as a banyan tree.
like the renowned “Wild F. lyrata and ordinary banyan, F. benghalensis, both start out their lives as epiphytes. When a seed falls into another tree’s canopy, it germinates, develops, and eventually strangles its host plant as it descends to the ground.
Your houseplant won’t do this, of course, but the tree shape is attractive. How can a rambunctious F. lyrata be transformed into a tall, graceful specimen?
First off, if you’ve recently acquired a highly sought-after fiddle-leaf, hold off on starting to prune it into a tree shape.
Whatever two-thirds of the intended height means to you within the boundaries of your space, let it grow to that point. The trunk might become strong and thick as a result.
It’s advisable to top the tree out at least eight to ten inches away from the ceiling if you want it to grow tall.
This not only improves the appearance but also prevents the top leaves from bending and slamming against your ceiling.
Say, for instance, that you want to top your tree off at about seven or eight feet and that your home has nine-foot ceilings. You shouldn’t begin trimming for lateral growth until the trunk is at least five feet tall based on these measurements.
Wait until spring or summer when the plant is actively growing before pruning your fiddle-leaf fig to generate a tree form with branching lateral growth. Then, make a cut at least six inches down from the tip of the tree.
You can preserve and grow this cutting! Cut in an internodal space, if possible.
Don’t remove the leaves that are below the cut. So that the plant can photosynthesize and generate energy to grow those lateral branches, you want them to stay.
Within a few weeks, your F. lyrata will start to branch from the cut. Although this tree occasionally produces just one branch, it frequently produces two or three additional lateral branches.
You can remove one or two leaves from the tree’s base once the new branches have developed leaves.
The hue of the leaves and emerging branches will deepen as the canopy ages. Feel free to remove one or two more leaves from the bottom part of the trunk once you become aware of this.
You can continue to prune leaves away from the tree’s trunk as the canopy grows over time. You’ll eventually grow a tidy trunk that supports a Y-shaped canopy.
Note: Some knowledgeable gardeners enjoy using a technique called “creating lateral branches by notching. Using this technique, the gardener carefully cuts through two nodes. This cut is supposed to encourage the tree to generate lateral branches without losing height.
Because of the fast growth of F. lyrata and the fact that we are confident that pruning for lateral branch growth yields reliable results, we advise using this technique to produce that attractive canopy.
After pruning, give your plant the best care possible by providing it with the right amount of water, fertilizer, and light, which will hasten the healing of its wounds.
Should fiddle leaf figs be pruned?
Our indoor plants also require occasional trimming, just like when we clip our hair or groom our dogs. This not only generally enhances their beauty but also benefits the health of the plant as a whole. Among the advantages of trimming your fiddle may be:
Space: Fiddle leaf figs have a propensity to grow rapidly under ideal conditions, so you could realize that your fiddle is getting “packed.” Your plant will benefit from improved ventilation if you prune a few leaves and branches.
Sickness: Prune any leaves that are showing indications of illness, such as brown spots, right away. In addition to using a lot of energy to repair these damaged spots, your plant may also swiftly transmit the infection to other neighboring leaves and across the entire plant.
Form: Pruning your tree will help you get the picture-perfect appearance you’ve been wishing for, whether you have uneven growth or you just want to improve its shape.
Can I chop my fig tree’s top off?
If a fig tree is left to grow on its own, it develops into a charming and romantic figure with a strong, twisted trunk that rises 50 feet in the air and thick, robust branches that span the same distance horizontally. You must begin training the tree as soon as possible if you want something more manageable and compact. A fruit tree is trained when it is young to develop a structure that produces copious amounts of fruit that is simple to harvest. Fig trees typically have an open center structure with no central branches, enabling more sunlight to enter. Cutting off the top of the young tree is the first step in the procedure.
Remove the newly planted fig tree’s top 24 inches or so from the ground. Act before the first buds emerge in the late winter or early spring. All remaining branches should be cut back to 6 inches.
Early in the summer, keep an eye out for quick new growth. Choose three healthy shoots from the new branches at the end of June to act as the main scaffolding branches. Select branches to be evenly spaced around the trunk, up to 8 inches vertically apart, with the lowest branch being 20 inches or so off the ground. Avoid branches that are attached to the trunk at tight angles; instead, go for angles of about 45 degrees. Use paint or ribbon to identify the scaffold branches so you won’t confuse them.
When the scaffold branches are longer than 30 inches, trim them back to 20 inches. On each scaffold branch, pick three or four auxiliary scaffold branches. Reduce all other shoots to a height of 6 inches.
Why should I Wiggle my Fiddle leaf fig?
Your indoor tree’s trunk can be moved to simulate wind, which will help you become more resilient outside. You can also leave your tree outside for extended periods of time to strengthen its trunk and expose it to the elements. Once you get the leaves inside, be sure to inspect them for bugs.
What are the best growing conditions for an indoor fiddle leaf fig tree?
Know that your fiddle leaf fig tree prefers moderate temperature changes and place it in a sunny spot within the house. The tree should be planted in a container with well-draining soil that is kept humid but not soggy since this might cause root rot.
Why isn’t my fiddle leaf fig tree flowering?
You should be careful not to overwater your fiddle leaf fig because it is prone to root rot. When storing the fig within a container, make sure the bottom has lots of holes to allow for proper drainage.
How do I fix a leggy fiddle leaf fig tree?
Give a leggy or tilted fiddle leaf fig tree bright, filtered sunshine as treatment. Please place your plant in the area of the house that gets the most indirect sunlight, which is usually six to eight hours per day. Don’t keep it in the Sun for too long, though; doing so could scorch the leaves.
Will wiggling my fiddle leaf fig tree weaken its roots?
Every one to two weeks, wiggle your fiddle leaf fig tree for 1.5 to 2 minutes to significantly thicken the trunk. Beginning with light shaking, progressively build up the force. If your plant is stake-supported, move it about at first with the support in place. You can take the stake out once your fig tree has gotten used to this practice.
What makes a fiddle leaf fig shake?
“To keep my fiddle upright when it was young and immature, I needed a wooden dowel. I was able to remove the dowel and it no longer need extra support because it was able to strengthen itself over time as it grew and with frequent shakings, Paige added.
So even though I wouldn’t advise you to shake your plants firmly, giving them a gently rock would not harm them. In addition to your FLF, I can see this idea working well for Rubber plants, Monsteras, Alocasia, and Pilea plants. They all have thick stems that frequently need to support a lot of weight as the leaves enlarge. This will probably become a regular component of how I take care of my plants. Play some music, get moving, and invite my plants to join in. It seems like it would be enjoyable.
When do fig trees need to be pruned?
After the worst frosts have passed, it is ideal to prune fig trees in March or April; any dead and diseased wood should be cut out. according to Thompson & Morgan’s Sue Sanderson (opens in new tab). In this manner, the plant will remain sufficiently dormant to withstand the pruning while the frosts will not be able to harm the wounds left by the trimming.
Fig trees leak a white sap when they are cut, hence it is crucial for the health of the tree that it is dormant while chopping huge branches.
How should a fig tree be pruned?
Whether you have a fig tree or a fig bush in your backyard garden, pruning it each year will promote growth. Think about some general advice for this procedure.
- 1. In the tree’s first year, prune it. When you first plant a young fig tree or fig shrub that you purchased from a nursery, trim it. When pruning for the first time, you should remove roughly 50% of the branches. This will enable the tree to concentrate its efforts on developing a solid root system.
- 2. During the tree’s first winter, prune it once more. Winter trimming should be done every year, beginning with the first winter your tree experiences. The end of the tree’s dormant season in late winter is the ideal time to use pruning shears. By early spring, new branches will begin to grow as a result.
- 3. Continue to prune your tree every year after that. It’s crucial to prune your fig tree in its first year, but remember to continue pruning it the following year and the year after that. Fresh fruit will start to ripen in early summer if your fig tree is pruned while it is dormant. This will result in a more fruitful growth season.
- 4. Decide which branches should bear fruit. It’s time to go strategic now that you’ve finished your first pruning. Search for five to six exceptionally sturdy branches that branch off from the main trunk as you prune the tree in its second year. Your main branches for fruit production will be these. Remove the rest of the tinier branches from the main trunk.