Sooner or later, you’re going to want to understand how to assist your fiddle leaf fig in branching if you want it to take on the desired tree-like shape.
A plant’s natural tendency is to climb upward so that it can compete with other plants for more sunlight. Therefore, sometimes it requires a little human assistance to motivate them to branch outward.
If you’ve ever pruned a hedge or vine-like plant, you know how important it is for getting lush, bushy growth. That also holds true for your fiddle leaf fig! When a stem, branch, or trunk is cut back, several stems are likely to emerge in its place.
In order to encourage your Fiddle Leaf Fig to branch, apply the following three techniques. Also, watch the video below to see me prune my own Fiddle Leaf Fig.
How is a fiddle leaf fig notch made?
You need to gather your tools and then find a node on the trunk of your fiddle leaf fig in order to notch it.
Look for the somewhat thicker portions on the trunk between leaves or branches to locate nodes, which are locations on the trunk that hold latent leaf buds. They could also resemble a line encircling the trunk.
You will then make your cut directly above the node. To do this, push into the wood with a knife or the sharp edge of your shears, or slice it by moving the blade from one side to the other.
Be very careful not to press or slice more than a third of the way through the trunk as this could result in pruning your plant rather than notching it. Instead, cut deeply enough to see white sap begin to flow.
To give your plant a little hormonal boost and improve your chances of a successful notching, it’s also a good idea to obtain some Propagation Promoter on a cotton ball and dab it on the incision.
Can you cut a fiddle leaf fig’s stem?
Similar to sculpting a masterpiece, shaping your fiddle leaf fig requires that you start with an idea of what you want the finished product to look like.
To ensure that the remaining foliage looks balanced, I find it helpful to label all the branches you want to remove with colorful tape or a Post-it Note before you begin. To lessen the risk of shock, start out gently and never remove more than 10% of your plant at once.
Decide on Your Ideal Shape
Fiddle leaf fig plants often have one of two shapes: a bush or a tree.
Smaller plants are typically bushier, whereas larger plants are typically more fashioned like trees. You might want to start shaping your little plant into a tree as it grows. Choose whether you want to prune your plant to maintain its compact bush shape or to give it a correct tree shape.
Plan to Remove Damaged Leaves or Branches
So that you can arrange to eliminate the least healthy parts of your plant first, evaluate the general health of each branch and group of leaves. Mark any areas that need to be removed if there are any leaves with brown spots or branches with smaller leaf growth.
Remove Crossing Branches
To increase airflow and relieve crowding, you should eliminate some portions of densely populated branches. You should take care of any branches that touch each other as well as any leaves that are preventing one another’s leaves from growing.
Create Your Ideal Shape
Any growth that is 8 to 10 inches or less from the ceiling, the surrounding walls, or the furniture should be planned for removal. Next, cut off any growth that does not conform to your ideal shape.
Remove lower leaves and branches to reveal a good trunk if you want to create a tree-like shape. Remove gangly or ugly growth if your plant is out of balance to give it a more appealing overall form.
How to Make Your Cuts
Pruning should begin once you’ve marked the sections you want to cut out and made sure you like the way the tree looks in its finished form. When pruning your plant, make sure the cutting motion does not crush or harm the stem by using a sharp, clean tool.
Cut each one away from the trunk or any leaves by about a half-inch. With no chance of infection spreading to the main trunk or any surviving leaves, this enables your plant to heal properly. In order to prevent the spread of bacteria and diseases, pick up and dispose of any falling leaves or garbage.
New Growth After Pruning
Generally, if your plant is in good health, it will split its branch where it has been pruned, resulting in two branches where one used to be.
Eventually, this creates the impression of a fuller, healthier plant. Your plant might only continue to grow one branch where it was cut if it is in pain or isn’t getting enough light. After pruning, allow access to lots of light to promote more development.
Fertilize After Pruning
Fertilize your plant frequently after pruning to promote new growth and aid in the plant’s recovery from the shock of pruning. (Are you unsure of the ideal fertilizer for your fiddle leaf fig? Test out our plant food! Within a few weeks to a month after pruning your plant, you ought to notice new growth.
Should I remove the fiddle leaf fig’s bottom leaves?
You should be aware of what those bottom leaves do before selecting when to remove them.
Lower foliage has the same function as that fresh, vibrant growth up top: the leaves work to combine that green chlorophyll, also known as “the meat of the leaf,” with sunlight, carbon dioxide, and water to produce sap, the plant’s own sugary food.
So leave them alone if you want the trunk, roots, and new growth to continue receiving energy from the sun through the foliar producers and absorbing it.
Another advantage of the lower leaves is that this is typically where the most frequent watering issues show up. To put it another way, many owners of fiddles may detect overwatering and underwatering based on early warning indicators from these bottom leaves. You lose access to one of the plant’s early warning systems if you remove them.
Keep in mind that the lower leaves should be saved for the very last stage of shaping because they AID in giving the tree its characteristic shape.
Once more, deciding whether or not to remove these lower leaves depends on what they do for the plant.
How do you make a fiddle leaf fig bushier?
How to Grow Your Fiddle Leaf Fig Tree Bigger and Quicker in 7 Easy Steps!
- OPTIMIZE THE POT SIZE IN STEP 1.
- Step 2: GUARANTEE OUTSTANDING DRAINAGE.
- 3rd step: COMPLETE, REGULAR WATERING.
- Step 4: Verify the soil’s aeration.
- Do an annual soil treatment in step five.
- Step 6 is to fertilize less frequently.
- STEP 7: TURN ON THE LIGHTS!
How do you encourage branching?
One of the finest strategies to promote a tree branch’s growth is pruning. A branch can grow more quickly if upper-story plants are pruned and thinned to provide room for more light to reach a struggling understory tree or bush.
How can a fig tree be encouraged to branch?
The quickest and safest approach to encourage your fiddle leaf fig to branch out is without a doubt pruning! It entails cutting your Fiddle Leaf Fig’s stem off at the height you want branches to emerge from. Remember that you may always propagate your Fiddle Leaf Fig and grow a brand-new plant from the clipped portion!
Pruning works by reawakening buds that are dormant beneath the incision. The growth hormone (auxin) is redirected to the buds that are typically closest to the cut because it can no longer move up the stem, which causes this to occur.
Usually, if you want your plant to branch, you want it to have at least a few branches, if not more. Pruning above a cluster of leaves will give you the highest chance of getting many branches. Or a cluster of closely spaced leaves.
Where the leaves and stem meet, dormant buds can be found. You should therefore aim for a region of your FLF that contains buds close together if you want to have the best chance of awakening several latent buds. Don’t panic if you can’t see them; sometimes they are tiny and difficult to see. They will be present!
The distance between the “nodes” is another item to watch out for. These locations can also produce buds. On your fiddle leaf fig, nodes—which resemble little rings around the stem—are frequently where the crunchy, browned leaf casings are located.
Within a week or two, you should start to notice buds getting bigger. Nevertheless, depending on the climate, it may take longer and even longer for the new leaves to bloom.
Since you’ll be removing a portion of stem, pruning is best done when the plant is taller than the height you’d like it to branch at. For instance, if you want your FLF to have branches that are around 3 feet high but it is 5 feet tall, you will need to prune the plant to make it only 3 feet tall.
See the section on notching if you don’t want to reduce the height of your plant.
Tips for Pruning:
- Use a set of cutters that are well-kept and razor-sharp.
- Make an angle cut in the stem.
- Remove any sap by using a fresh paper towel.
- Dormant buds (nodes) are located where a leaf meets the stem; therefore, you should prune just above a leaf. At this point, you might be able to notice a tiny brown (or occasionally green) bump.
What happens when a fiddle leaf fig is notched?
A room is brightened by a bushy fiddle leaf fig with lush foliage, but occasionally they might become leggy, malformed, or not have the full foliage you want. Making sure a fiddle leaf fig plant is healthy and receiving everything it needs to thrive is the first step in encouraging it to grow bushy leaves.
Before attempting to coerce the plant into producing bushy foliage, be sure you are providing for its growing requirements and that the plant is healthy. Here is a quick list of the requirements for your fiddle leaf fig plant to thrive inside.
Check on its light needs
For photosynthesizing to take place and generate the energy required for growth, your fiddle leaf fig needs direct sunshine. Place your fiddle leaf fig in an area that gets at least 6 hours of direct sunlight per day to make sure its lighting needs are being satisfied. It works great to be near a window in the west or south. An eastern window also works nicely if you have adequate eastern exposure.
The level of light your fiddle leaf fig plant needs to thrive is not present in the light coming from a northern window. Similar to this, watch out that your plant doesn’t get too much light, since a sunburned fiddle leaf fig won’t look its best.
Make sure it’s getting enough water
Your fiddle leaf fig requires enough water to stay healthy and beautiful. Every time the soil feels dry to the touch 2 to 3 inches below the surface, water it thoroughly so that water runs through the bottom of the pot. After watering your plant, empty the saucer or catchpan. A fiddle leaf fig that has been overwatered may develop root rot, among a number of other problems. Water that is left in the saucer may siphon into the soil and keep it moist.
When determining how frequently to water a fiddle leaf fig, keep a close eye on the soil around the plant and create a schedule that works for you. When it is vigorously developing in the spring and summer, it can need watering once a week or more. During the fall and winter, it may last 10 days or longer without needing water.
Put your fiddle leaf fig in the right soil
To maintain the health of your fiddle leaf fig, you need well-draining soil. The roots may become trapped in squishy soil as a result of poor soil drainage. This may result in diseases like root rot.
By mixing one to two parts all-purpose potting soil, one part perlite, and one part peat moss, you can create your own potting soil for your fiddle leaf fig tree. Widely regarded as the ideal soil for fiddle leaf figs, this produces a light soil that drains well.
Ensure it has the right temperature and humidity
Temperature changes will harm your fiddle leaf fig, which enjoys temperatures between 65 and 75 degrees. It should not be planted close to heating or air conditioning vents because it is susceptible to both hot and cold gusts. It prefers a relative humidity of between 30 and 65 percent, therefore dry air in your home during the winter months may be problematic.
Use water-filled pebble trays underneath the pot or set up a humidifier to maintain the happiness of your fiddle leaf fig tree. You might arrange your plants in a cluster to take use of the moisture they transpire. The surrounding humidity will increase as a result.
Some people prefer to spritz their plants frequently, but this method is ineffective for increasing the humidity in the area around your plants. Misting has short-lived effects and needs to be done frequently during the day to be effective.
Feed your fiddle leaf fig with its preferred fertilizer
High nitrogen fertilizers work best for fiddle leaf figs. The optimal formula is 3-1-2. This or a similar recipe can be purchased from a hardware store or garden shop. From spring through summer, feed your fiddle leaf fig once a month, adhering to the application rate on the container. When new growth starts to show in the spring, you should restart fertilizing your fiddle leaf fig.
Pinch your fiddle leaf fig
The simplest and least labor-intensive technique to spur new growth is to pinch.
The act of pinching a fiddle leaf fig involves using your thumb and finger to scrape off the tiniest fresh leaves from the tops of your plant’s branches and stem. Squeeze the fresh leaves to remove them from the plant by locating them.
The plant must create new growth from nodes along the stem or branch when the fresh leaves are pinched out.
Prune your plant
While pruning requires a bit more work than pinching does in terms of making your fiddle leaf fig bushier, the consequences are the same.
You will require a clean, sharp pair of clippers or a knife to prune your fiddle leaf fig. Find a node on the plant’s stem where you want new growth or lateral branches to develop.
Just 1/4 to 1/2 inch above the node, cut the stem. This will compel the plant node to produce new growth. To force branching, you can prune lateral branches or the fiddle leaf fig’s entire top.
No more than 10% of the plant should be pruned. Extreme trimming may stress the plant and retard its growth.
Notch your fiddle leaf fig
A more sophisticated technique for making your fiddle leaf fig tree bushy is notching.
As previously mentioned, notching entails slicing the plant’s stem right above a node. This prevents the release of growth hormones and forces the node to produce new growth.
Since notching necessitates a deep cut through one-third of the stem, it carries a small chance of accidently cutting the entire stem. If you want to force new branches and bushy growth on your fiddle leaf fig tree, try notching it as described above.
Your fiddle leaf fig plant will look better if you promote lush new growth. Notching is one method of doing that, but it’s not the only one. If you’re worried about notching your fiddle leaf fig and running the risk of breaking it or completely cutting the stem, think about pinching or pruning to create a bushy plant as an alternative.