The spring, when there will be sufficient of light to support healing and new growth, is the ideal time to prune your fiddle leaf fig. Prune as much as you can in the spring or early summer. The stems of your plant could be crushed by blunt tools or scissors, therefore you should invest in a good set of pruning shears.
What happens if the top of a fiddle leaf fig is chopped off?
Your fiddle leaf fig probably has no other branches that will allow it to transition from a fiddle leaf shrub to a fiddle leaf tree. In addition, bear the following in mind before proceeding:
The amount of regrowth that results from pruning depends on how severe it was. The reason for this is that the plant is trying to grow again in an effort to balance the root system below with the shoot system above, which is now designed to support the plant at its bigger size before trimming.
Usually, the most active shoot growth takes place 6 to 8 inches after the pruning cut.
Make the cut on your fiddle leaf fig
Make a decision regarding the size of the Ficus lyrata cut. Once more, the branching will be more noticeable the longer a part is clipped. (And the less the plant will grow in height, at least for that shoot.)
Your fiddle leaf fig won’t be encouraged to generate as many lateral branches off of the main trunk if you simply pinch out the fresh buds at the top with your fingers.
If you want to encourage a little lateral development to make your plant appear fuller near the top, pinching is more helpful.
On the other hand, you’ll see a lot more branching if you remove 12 of the top shoots.
Choose the node that you want to cut above. The spots on stems known as nodes are where leaves, buds, or branches can grow. However, not every node has leaves or branches; some nodes may only have a mark and a little thickening of the stem. Internodes are the parts of the stem that lie between the nodes.
3. Make use of a clean pair of pruners. Just above the top of your node, make the cut. Cut just above the node rather than into it, which would harm it.
Any plant in the fig family, including your fiddle leaf fig, will exude an oozing, milky, white sap when cut. Simply avoid eating it, getting it in your eyes, or letting it land on the carpet because it can be annoying.
4. As a final piece of advice, wait to remove leaves from the trunk of your fiddle leaf until the new branches have begun to grow. Your plant should be as robust as possible because those leaves aid in the development of the new lateral buds.
(Are you wondering what to do with the plant pieces you pruned? Why not cultivate a second fiddle leaf fig?
I’m done now! Now, give your new lateral buds, which will eventually grow into branches, a few weeks. While the exact length of time varies on a number of variables, your chances of success are higher if you attempt this in the spring, when fiddle leaves are actively growing, as opposed to the winter, when they are largely dormant. In comparison to winter, when the plant will need more time to heal the cut and form new buds, springtime will see rapid new development.
Can you cut a fiddle leaf fig all the way back?
As I indicated earlier, many growers like to cultivate a traditional tree shape, complete with a distinct canopy and trunk. However, F. lyrata tends to grow in a columnar or bushy shape when kept as a houseplant.
In the wild, F. lyrata does this on its own by losing its lower leaves and growing into its original shape as a banyan tree.
like the renowned “Wild F. lyrata and ordinary banyan, F. benghalensis, both start out their lives as epiphytes. When a seed falls into another tree’s canopy, it germinates, develops, and eventually strangles its host plant as it descends to the ground.
Your houseplant won’t do this, of course, but the tree shape is attractive. How can a rambunctious F. lyrata be transformed into a tall, graceful specimen?
First off, if you’ve recently acquired a highly sought-after fiddle-leaf, hold off on starting to prune it into a tree shape.
Whatever two-thirds of the intended height means to you within the boundaries of your space, let it grow to that point. The trunk might become strong and thick as a result.
It’s advisable to top the tree out at least eight to ten inches away from the ceiling if you want it to grow tall.
This not only improves the appearance but also prevents the top leaves from bending and slamming against your ceiling.
Say, for instance, that you want to top your tree off at about seven or eight feet and that your home has nine-foot ceilings. You shouldn’t begin trimming for lateral growth until the trunk is at least five feet tall based on these measurements.
Wait until spring or summer when the plant is actively growing before pruning your fiddle-leaf fig to generate a tree form with branching lateral growth. Then, make a cut at least six inches down from the tip of the tree.
You can preserve and grow this cutting! Cut in an internodal space, if possible.
Don’t remove the leaves that are below the cut. So that the plant can photosynthesize and generate energy to grow those lateral branches, you want them to stay.
Within a few weeks, your F. lyrata will start to branch from the cut. Although this tree occasionally produces just one branch, it frequently produces two or three additional lateral branches.
You can remove one or two leaves from the tree’s base once the new branches have developed leaves.
The hue of the leaves and emerging branches will deepen as the canopy ages. Feel free to remove one or two more leaves from the bottom part of the trunk once you become aware of this.
You can continue to prune leaves away from the tree’s trunk as the canopy grows over time. You’ll eventually grow a tidy trunk that supports a Y-shaped canopy.
Note: Some knowledgeable gardeners enjoy using a technique called “creating lateral branches by notching. Using this technique, the gardener carefully cuts through two nodes. This cut is supposed to encourage the tree to generate lateral branches without losing height.
Because of the fast growth of F. lyrata and the fact that we are confident that pruning for lateral branch growth yields reliable results, we advise using this technique to produce that attractive canopy.
After pruning, give your plant the best care possible by providing it with the right amount of water, fertilizer, and light, which will hasten the healing of its wounds.
Should I remove the fiddle leaf fig leaves that are broken?
We advise always removing the damaged portion of a leaf or, if it is completely brown, the entire leaf. The plant recovers and looks its best with the help of removal of the dead leaf or damaged parts. Pruning shears or extremely sharp scissors are required.
Instructions for proper removal of damaged or dead leaves
1. Use clean shears to remove any brown leaf tips or patches. To prevent harming the plant’s remaining good foliage, merely remove the damaged tips or areas, leaving a very small margin of brown. 2. Remove individual leaves at their bases if the entire leaf has turned brown. Gently tug the leaf; it might fall off on its own. Gently lifting the leaf should cause it to detach; if not, use clean shears to cut through the stem.
Do you have a query or concern regarding a plant? The Grow-HowTM Team is here to assist, so don’t worry! We are here to provide you with the information you need to be the greatest plant parent you can be, regardless of the question you have or the type of plant you have. We would like to impart to you our love and understanding of plants.
How can a fiddle leaf fig be prevented from becoming very tall?
Like grooming your dog or cat, pruning your plant is crucial to keeping it healthy and attractive. Pruning your fiddle leaf fig prevents weed growth and maintains its health. You should prune your plant for a number of reasons.
Remove Damaged Leaves and Stems
To promote the general health of your plant, you can safely remove any leaves with significant brown spots or holes. A damaged or ill leaf depletes your plant’s nutrients and increases the risk of infection. Any time of year, get rid of any leaves that are broken or ill right away.
Keep Your Plant From Getting Too Tall
Healthy fiddle leaf fig plants have a tendency to grow aggressively toward the sun, which could cause them to become too big or tall for their environment. You should cut back any growth over that height since plants look their best when their upper leaves are at least 8 to 10 inches below the ceiling. You can make your plant stronger and more compact by trimming it to prevent it from growing too tall.
Give Your Plant Balance
Your plant might grow sideways towards the direction of the closest window depending on where it receives its light, which could make it asymmetrical or unbalanced. Rotate your plant frequently so that it develops symmetrically to avoid this. Even after pruning, plants can still go out of balance, which will assist prevent uneven growth.
Decrease Crowded Areas
To stay healthy, fiddle leaf fig leaves require airflow and room. The leaves on your plant may become damaged by rubbing against one another if it becomes overly compact and crowded. Pruning will help to spread out crowded regions.
Shape Your Plant
Due to their restricted exposure to sunlight when grown indoors, fiddle leaf fig plants can develop unique morphologies. They might develop sideways rather than upwards toward the sun as they would if they were growing outside.
The lowest leaves will also fall off in the wild because of a lack of sunshine. Lower leaves, though, may still receive plenty of light inside and stay on the plant. The desired tree-like shape may be destroyed as a result. You should cut off lower leaves and branches that are spreading out too much in order to shape your plant so that it looks best in the area where it is placed.
Can I chop my fig tree’s top off?
If a fig tree is left to grow on its own, it develops into a charming and romantic figure with a strong, twisted trunk that rises 50 feet in the air and thick, robust branches that span the same distance horizontally. You must begin training the tree as soon as possible if you want something more manageable and compact. A fruit tree is trained when it is young to develop a structure that produces copious amounts of fruit that is simple to harvest. Fig trees typically have an open center structure with no central branches, enabling more sunlight to enter. Cutting off the top of the young tree is the first step in the procedure.
Remove the newly planted fig tree’s top 24 inches or so from the ground. Act before the first buds emerge in the late winter or early spring. All remaining branches should be cut back to 6 inches.
Early in the summer, keep an eye out for quick new growth. Choose three healthy shoots from the new branches at the end of June to act as the main scaffolding branches. Select branches to be evenly spaced around the trunk, up to 8 inches vertically apart, with the lowest branch being 20 inches or so off the ground. Avoid branches that are attached to the trunk at tight angles; instead, go for angles of about 45 degrees. Use paint or ribbon to identify the scaffold branches so you won’t confuse them.
When the scaffold branches are longer than 30 inches, trim them back to 20 inches. On each scaffold branch, pick three or four auxiliary scaffold branches. Reduce all other shoots to a height of 6 inches.
When do fig trees need to be pruned?
After the worst frosts have passed, it is ideal to prune fig trees in March or April; any dead and diseased wood should be cut out. according to Thompson & Morgan’s Sue Sanderson (opens in new tab). In this manner, the plant will remain sufficiently dormant to withstand the pruning while the frosts will not be able to harm the wounds left by the trimming.
Fig trees leak a white sap when they are cut, hence it is crucial for the health of the tree that it is dormant while chopping huge branches.
How should a fig tree be pruned?
Whether you have a fig tree or a fig bush in your backyard garden, pruning it each year will promote growth. Think about some general advice for this procedure.
- 1. In the tree’s first year, prune it. When you first plant a young fig tree or fig shrub that you purchased from a nursery, trim it. When pruning for the first time, you should remove roughly 50% of the branches. This will enable the tree to concentrate its efforts on developing a solid root system.
- 2. During the tree’s first winter, prune it once more. Winter trimming should be done every year, beginning with the first winter your tree experiences. The end of the tree’s dormant season in late winter is the ideal time to use pruning shears. By early spring, new branches will begin to grow as a result.
- 3. Continue to prune your tree every year after that. It’s crucial to prune your fig tree in its first year, but remember to continue pruning it the following year and the year after that. Fresh fruit will start to ripen in early summer if your fig tree is pruned while it is dormant. This will result in a more fruitful growth season.
- 4. Decide which branches should bear fruit. It’s time to go strategic now that you’ve finished your first pruning. Search for five to six exceptionally sturdy branches that branch off from the main trunk as you prune the tree in its second year. Your main branches for fruit production will be these. Remove the rest of the tinier branches from the main trunk.
The latest in plant care tips for keeping your foliage happy and healthy, brought to you by premium plant delivery service Lon & George.
It’s normal for plants to get the occasional brown spot or discolored leaf as they get older. In order to keep our plants looking attractive throughout the seasons, we must trim and prune them. Here’s how to maintain their appearance.
Start with the bottom leaves and work your way up, using a pair of clean scissors.
Follow the leaf’s natural shape when pruning; this requires some skill and practice. Consider organic curves rather than angular shapes.
3. In order to avoid opening a new wound, you should ideally leave some of the brown edge. If you do cut into the leaf, help the damaged edges dry by covering them with tissue paper.
Bonus advice: Don’t go overboard! Observe your plant’s shape from a distance. It’s acceptable to leave a few spots that are discolored, particularly if they add to the general fullness and beauty of your plant’s natural shape.