Wiggling the trunk of your indoor tree replicates the wind which would help build resilience in an outdoor environment. You can also leave your tree outside for extended periods of time to strengthen its trunk and expose it to the elements. Once you get the leaves inside, be sure to inspect them for bugs.
What are the best growing conditions for an indoor fiddle leaf fig tree?
Know that your fiddle leaf fig tree prefers moderate temperature changes and place it in a sunny spot within the house. The tree should be planted in a container with well-draining soil that is kept humid but not soggy since this might cause root rot.
Why isn’t my fiddle leaf fig tree flowering?
You should be careful not to overwater your fiddle leaf fig because it is prone to root rot. When storing the fig within a container, make sure the bottom has lots of holes to allow for proper drainage.
How do I fix a leggy fiddle leaf fig tree?
Give a leggy or tilted fiddle leaf fig tree bright, filtered sunshine as treatment. Please place your plant in the area of the house that gets the most indirect sunlight, which is usually six to eight hours per day. Don’t keep it in the Sun for too long, though; doing so could scorch the leaves.
Will wiggling my fiddle leaf fig tree weaken its roots?
Every one to two weeks, wiggle your fiddle leaf fig tree for 1.5 to 2 minutes to significantly thicken the trunk. Beginning with light shaking, progressively build up the force. If your plant is stake-supported, move it about at first with the support in place. You can take the stake out once your fig tree has gotten used to this practice.
Why is the trunk of my fiddle leaf fig so thin?
Every owner of a fiddle leaf fig plant wants their ficus lyrata to develop into a big, statement-making tree. Unfortunately, many indoor gardeners produce an unattractive, uneven, and rather small version of the same. How can you reinforce the trunk of your fiddle leaf fig tree?
Fiddle leaf fig tree trunks that are not thick, robust, supportive, and nourishing pillars are one of the causes of weak fiddle leaf fig tree trunks.
Sometimes fiddle leaf fig trees do get tall, but they can’t support themselves. The fact that a prop or post is used to hold this beautiful plant up detracts from so many photographs of it.
Today, I demonstrate in the video below exactly how to reinforce and thicken the trunk of a fiddle leaf fig tree so it can develop a strong, stiff, and tall structure without requiring a stake to support it.
How to At-Home Strengthen Your Trunk Using the Fiddle Leaf Fig Hack (No Products Required)
Will the trunk of my fiddle leaf fig thicken?
This wriggling motion makes the fiddle leaf fig tree larger and stronger, just as exercise has been shown to be good for people.
Although the shaking procedure requires some patience and commitment, the end effect is worthwhile.
Initially, start with low-force wiggling. Increase the intensity of this activity as your plant gets used to it while still ensuring the fiddle leaf fig tree’s complete safety.
You can scale your wriggling motions to resemble the sporadic tropical storms and gusts of wind that these species typically experience in the Western African rainforests.
Establishing the Right Schedule
Every one to two weeks, depending on how much your fiddle leaf fig tree can handle, repeat the wiggle exercise for about one and a half to two minutes.
Allow your fig tree to recuperate with the support in place at first if it is reliant on a stake.
When the plant appears to be functioning effectively on its own, however, perform these shaking motions without the prop, progressively stepping up the intensity.
All of your fiddle leaf fig trees will eventually grow stronger, thicker trunks that don’t need any more support.
Please keep in mind that for the greatest results, the plant needs to be kept in its ideal environment, which includes bright, indirect sunlight, weekly watering, and well-draining, well-aerated soils.
How can a tree trunk be made stronger?
Stakes are positioned on either side of a tree after it is planted, watered, and mulched. Ties are firmly fastened from the trunk to the stakes. The stakes are taken out after a year or so, allowing this tree to “feel the breeze through its branches, if you will” and wave in the wind.
What happens when a fiddle leaf fig is notched?
A room is brightened by a bushy fiddle leaf fig with lush foliage, but occasionally they might become leggy, malformed, or not have the full foliage you want. Making sure a fiddle leaf fig plant is healthy and receiving everything it needs to thrive is the first step in encouraging it to grow bushy leaves.
Before attempting to coerce the plant into producing bushy foliage, be sure you are providing for its growing requirements and that the plant is healthy. Here is a quick list of the requirements for your fiddle leaf fig plant to thrive inside.
Check on its light needs
For photosynthesizing to take place and generate the energy required for growth, your fiddle leaf fig needs direct sunshine. Place your fiddle leaf fig in an area that gets at least 6 hours of direct sunlight per day to make sure its lighting needs are being satisfied. It works great to be near a window in the west or south. An eastern window also works nicely if you have adequate eastern exposure.
The level of light your fiddle leaf fig plant needs to thrive is not present in the light coming from a northern window. Similar to this, watch out that your plant doesn’t get too much light, since a sunburned fiddle leaf fig won’t look its best.
Make sure it’s getting enough water
Your fiddle leaf fig requires enough water to stay healthy and beautiful. Every time the soil feels dry to the touch 2 to 3 inches below the surface, water it thoroughly so that water runs through the bottom of the pot. After watering your plant, empty the saucer or catchpan. A fiddle leaf fig that has been overwatered may develop root rot, among a number of other problems. Water that is left in the saucer may siphon into the soil and keep it moist.
When determining how frequently to water a fiddle leaf fig, keep a close eye on the soil around the plant and create a schedule that works for you. When it is vigorously developing in the spring and summer, it can need watering once a week or more. During the fall and winter, it may last 10 days or longer without needing water.
Put your fiddle leaf fig in the right soil
To maintain the health of your fiddle leaf fig, you need well-draining soil. The roots may become trapped in squishy soil as a result of poor soil drainage. This may result in diseases like root rot.
By mixing one to two parts all-purpose potting soil, one part perlite, and one part peat moss, you can create your own potting soil for your fiddle leaf fig tree. Widely regarded as the ideal soil for fiddle leaf figs, this produces a light soil that drains well.
Ensure it has the right temperature and humidity
Temperature changes will harm your fiddle leaf fig, which enjoys temperatures between 65 and 75 degrees. It should not be planted close to heating or air conditioning vents because it is susceptible to both hot and cold gusts. It prefers a relative humidity of between 30 and 65 percent, therefore dry air in your home during the winter months may be problematic.
Use water-filled pebble trays underneath the pot or set up a humidifier to maintain the happiness of your fiddle leaf fig tree. You might arrange your plants in a cluster to take use of the moisture they transpire. The surrounding humidity will increase as a result.
Some people prefer to spritz their plants frequently, but this method is ineffective for increasing the humidity in the area around your plants. Misting has short-lived effects and needs to be done frequently during the day to be effective.
Feed your fiddle leaf fig with its preferred fertilizer
High nitrogen fertilizers work best for fiddle leaf figs. The optimal formula is 3-1-2. This or a similar recipe can be purchased from a hardware store or garden shop. From spring through summer, feed your fiddle leaf fig once a month, adhering to the application rate on the container. When new growth starts to show in the spring, you should restart fertilizing your fiddle leaf fig.
Pinch your fiddle leaf fig
The simplest and least labor-intensive technique to spur new growth is to pinch.
The act of pinching a fiddle leaf fig involves using your thumb and finger to scrape off the tiniest fresh leaves from the tops of your plant’s branches and stem. Squeeze the fresh leaves to remove them from the plant by locating them.
The plant must create new growth from nodes along the stem or branch when the fresh leaves are pinched out.
Prune your plant
While pruning requires a bit more work than pinching does in terms of making your fiddle leaf fig bushier, the consequences are the same.
You will require a clean, sharp pair of clippers or a knife to prune your fiddle leaf fig. Find a node on the plant’s stem where you want new growth or lateral branches to develop.
Just 1/4 to 1/2 inch above the node, cut the stem. This will compel the plant node to produce new growth. To force branching, you can prune lateral branches or the fiddle leaf fig’s entire top.
No more than 10% of the plant should be pruned. Extreme trimming may stress the plant and retard its growth.
Notch your fiddle leaf fig
A more sophisticated technique for making your fiddle leaf fig tree bushy is notching.
As previously mentioned, notching entails slicing the plant’s stem right above a node. This prevents the release of growth hormones and causes the node to produce new growth.
Since notching necessitates a deep cut through one-third of the stem, it carries a small chance of accidently cutting the entire stem. If you want to force new branches and bushy development on your fiddle leaf fig tree, try notching it as described above.
Your fiddle leaf fig plant will look better if you promote lush new growth. Notching is one method of doing it, but it’s not the only one. If you’re worried about notching your fiddle leaf fig and running the danger of breaking it or totally cutting the stem, think about pinching or pruning to create a bushy plant as an alternative.
How may new growth be encouraged on a fiddle leaf fig?
Fiddle Leaf Figs can be encouraged to branch by notching, which doesn’t entail the plant’s height being reduced. Instead, tiny cuts or “notches” are made all the way up and down the stem or trunk to promote the formation of new growth lower on the plant.
There are two distinct notching patterns. The first slashes diagonally through the FLF trunk at a depth of about one-third, immediately above a leaf or node. Similar in nature, the second involves two cuts and the removal of a tiny “chunk” or piece of the trunk. To remove a small portion of the trunk, make the two slices just 1-2 mm apart.
It might be challenging to properly notch a plant without accidently decapitating it or cutting too deeply. It’s unquestionably a more sophisticated technique with variable outcomes. If you want to try it, I also advise going numerous notches. Not all of them have a 100% success rate. So if you want two or three branches, you might want to do six notches.
The best stem for notching is one that is more aged or woody. It might be advisable to wait till your FLF stem reaches maturity if it is still green before attempting to notch.
Tips for Notching:
- You may have more control over the notch with a craft knife than with a pair of cutters.
- Directly above a leaf or node, cut the notch.
- Cut the notch diagonally, about a third of the way into the stem’s depth.
Should I remove the fiddle leaf fig’s bottom leaves?
You should be aware of what those bottom leaves do before selecting when to remove them.
Lower foliage has the same function as that fresh, vibrant growth up top: the leaves work to mix that green chlorophyll, commonly known as “the meat of the leaf,” with sunlight, carbon dioxide, and water to produce sap, the plant’s own sweet food.
So let them alone if you want the trunk, roots, and new growth to continue receiving energy from the sun through the foliar producers and absorbing it.
Another advantage of the lower leaves is that this is typically where the most frequent watering issues show up. To put it another way, many owners of fiddles may detect overwatering and underwatering based on early warning indicators from these bottom leaves. You lose access to one of the plant’s early warning systems if you remove them.
Keep in mind that the lower leaves should be saved for the very last stage of shaping because they AID in giving the tree its characteristic shape.
Once more, deciding whether or not to remove these lower leaves depends on what they do for the plant.
How should a leggy fig tree be pruned?
Whether you have a fig tree or a fig bush in your backyard garden, pruning it each year will promote growth. Think about some general advice for this procedure.
- 1. In the tree’s first year, prune it. When you first plant a young fig tree or fig shrub that you purchased from a nursery, trim it. When pruning for the first time, you should remove roughly 50% of the branches. This will enable the tree to concentrate its efforts on developing a solid root system.
- 2. During the tree’s first winter, prune it once more. Winter trimming should be done every year, beginning with the first winter your tree experiences. The end of the tree’s dormant season in late winter is the ideal time to use pruning shears. By early spring, new branches will begin to grow as a result.
- 3. Continue to prune your tree every year after that. It’s crucial to prune your fig tree in its first year, but remember to continue pruning it the following year and the year after that. Fresh fruit will start to ripen in early summer if your fig tree is pruned while it is dormant. This will result in a more fruitful growth season.
- 4. Decide which branches should bear fruit. It’s time to go strategic now that you’ve finished your first pruning. Search for five to six exceptionally sturdy branches that branch off from the main trunk as you prune the tree in its second year. Your main branches for fruit production will be these. Remove the rest of the tinier branches from the main trunk.