How To Shine Fiddle Leaf Fig

Others polish their fiddle leaf fig leaves using a variety of homemade cures. Some of the more well-liked ones are mayonnaise, olive oil, and coconut oil.

Remember: Leaf shine treatments and oils have the potential to clog the pores on the leaves of your fiddle leaf fig plant, so use them sparingly. Plants can die if their pores become clogged, which stops them from breathing.

When using leaf shine solutions or home treatments to make your fiddle leaf fig tree’s leaves shine, be sure to only apply them to the upper side of the leaves and avoid putting oils on the underside of the leaf to decrease the risk to your plant.

How to get the best leaf shine for fiddle leaf figs

Fiddle leaf fig leaves in good health have a natural sheen, therefore extra preparations are not always required to maintain them shiny. To keep the leaves looking their best, simply wash them with water and mild dish soap.

To create a solution for washing your fiddle leaf fig tree’s leaves that will make the leaves shine in this manner, combine one quarter of a teaspoon of dish soap with one quart of warm water.

Following that, you may either wet the cloth and gently wipe the leaves off with it, or spray the leaves gently with the solution (this spray bottle is extremely cheap and will do the job perfectly).

Provide humidity.

In fact, fiddles adore dampness as tropical plants. It maintains the suppleness of their leaves, enhancing their sheen and gorgeous deep green hue.

Keep your tree away from vents, heaters, and drafts. If you live in a dry region, use a humidifier or pebble tray to add some extra humidity.

In order for your tree’s new leaf buds to emerge healthy, green, and glossy, give it a shower every now and again.

Clean your leaves.

Again, it may seem obvious, but one of the main causes of dull leaves is hard water stains and dust.

Cleaning your leaves is also good for your health because plants utilize them for photosynthesis, which is like eating and breathing, and for respiration, which is like breathing.

Wipe your leaves down occasionally with distilled water and a tiny bit of detergent-free soap.

How are fiddle leaf fig leaves cleaned and made shiny?

The simplest approach of cleaning huge leaf plants can have a significant impact with just a spray bottle and a cloth. Sprinkle plenty of water on the plant or each leaf before gently wiping away the dust. Keep in mind that leaves can be delicate, so be careful not to handle them roughly. This could be a very time-consuming process, depending on the size of your plant!

What’s up with my fiddle leaf fig looking drab?

Ironically, too much and too little water are the two issues that fiddle leaf fig plants encounter most frequently. What’s worse is that it can be challenging to distinguish between the two.

Root rot, a fungal disease that damages the plant’s roots and leaves, is caused by overwatering. A dry plant with damaged leaves is the result of underwatering.

One clarification first. Since fiddle leaf figs prefer lots of sunshine and overwatering can cause root rot, the symptoms may be mistaken for overwatering if your plant isn’t getting enough sun. You should address both under-watering and excessive sun exposure since they both contribute to the drying out and burning of your plant.

However, how can you be certain whether your plant is too moist or too dry? First, take a closer look. Both disorders can be identified by brown spots, losing leaves, and curled edges. Here are the minute variations between a fiddle leaf fig plant that is overwatered and one that is underwatered.

Coconut oil and fiddle leaf fig trees: beneficial or bad?

My fiddle leaf fig tree is perhaps the subject I’ve been asked about the most during this blogging journey. If you’re anything like me, you want to do everything in your power to preserve that beauty. They are not only pricey, but they are also incredibly lovely! I think killing that monster would be as terrible as losing a family pet. As you can expect, I conducted a good deal of research before deciding to buy my tree. I consulted the nursery’s indoor plant experts, perused a lot of blogs, and looked online for the best fiddle leaf fig maintenance advice. Since my tree is currently flourishing, I want to share my best advice with everyone. I constantly receive mails from readers who are frantically trying to save their precious trees. Do not worry, my friends! If you follow these suggestions, your priceless tree won’t disappoint you.

Water from the bottom instead of the top.

This is without a doubt the BEST advice I ever received from the nursery expert. What you must do is as follows: Put your potted tree within a plastic liner, which is available here. Pour water into the pan and allow the tree absorb it via the holes in the bottom of the pot when you want to water your tree. This prevents you from drowning the poor animal and allows the water to be distributed evenly.

Don’t over water your tree.

I give my tree, which is about five feet tall, a half gallon of water once a week. Depending on the size of your tree and the season, water delivery will vary (due to changes in temperature).

Clean the leaves with coconut oil.

Once a month, I clean the leaves with coconut oil and a towel. This is significant because it cleans the leaves of dust. Dust can obstruct the sun’s rays, making it difficult for your plant to absorb the proper amount of light.

Place the tree in a bright corner of your home.

With plenty of indirect sunshine, the tree will flourish. Here, “indirect” is the important word! My tree is next to a big window in a corner. Although it receives a lot of sunlight, it is not scorched by the hot, direct light.

Rotate your tree each week.

Every week, I turn the pot a quarter turn. This promotes healthy growth for the entire tree by giving every leaf equal access to sunlight.

Be nice to your tree!

I appreciate you reading, my friends. I’m confident that if you use these suggestions, you won’t be sorry! Please feel free to contact me or post a comment if you have any further fantastic advice.

First, It Is Important To Clean Leaves

To keep your plants clean, healthy, and working properly, it’s a good idea to sometimes wipe down their leaves. Indoor plants naturally accumulate dust, grime, and dander, which can obstruct the plant’s ability to absorb light. This has further effects on photosynthesis and growth of the plant. Cleaning the leaves with a natural, gentle spray might help remove particularly difficult filth while protecting the plant.

Cleaning the leaves of houseplants is also beneficial as a preventative measure to fend off potential pests and diseases before they become apparent. Damage is frequently more challenging to repair once it has been discovered. The aim is to catch problems early.

Why Manufactured Leaf Polish Isn’t Great

Most store-bought leaf polishes have the simple purpose of making the plant look better and shine more. Beautifying the foliage is encouraged on even the labels. Yes, cleaning the surface with a plant’s leaves generally works. However, the harsh oils and occasionally chemicals used to make these shines and sprays settle on the surface of the leaf. This may result in accumulation, clog the stomata (pores), and prevent respiration, which would hamper plant growth. Ultra-shiny leaves might look phony and be harmful. Who would want a fake plant when they paid for an actual one?

How To Make Your Own Houseplant Polish

Making your own DIY leaf spray at home gives you the chance to securely clean and enhance your plants. This concoction will remove and keep out pests, hard water stains, and dirt. Additionally, as the plant’s inherent beauty is shown, your leaves will acquire a faint sheen.


  • 2 glasses of water
  • a half-strength vinegar
  • 2 drops of castile or dish soap (Dr. Bronner’s is a favorite)
  • Coconut oil, two drops (optional: if you really want that glossy look)

After combining the ingredients, you can either use a spray bottle to apply it to the leaves or just dip a cloth into the mixture. Use a soft fabric, such as microfiber, to shield the leaves from harm in either case. Use a single disposable paper towel for every plant as an alternative to reduce the danger of possibly transferring pests or diseases between plants. (Alternatively, fully wash the cloth in hot water after each use.)

Although there isn’t a particular period of time, we advise cleaning your plants every month or so. Remember that this spray only works on specific types of foliage and shouldn’t be applied to very delicate leaves, such those with a fuzzy texture (like African Violets and Cacti). Overall, caring for your houseplants properly can promote growth, longevity, and survival. Happy cleaning of the plants!

Can coconut oil be used to plant leaves?

A tiny drop of coconut oil applied to plant leaves lends a lovely gloss and deters some pests and diseases like mildew. A cotton rag with a few drops of coconut oil added should be gently rubbed on the leaves.

By applying this to the foliage, the leaves are prevented from absorbing an excessive amount of moisture. It also aids in the prevention of fungal illnesses and problems in plants because it is abundant in microbial and antifungal qualities.

Avoid placing plants in direct sunlight while using coconut oil on them because the oil may end up absorbing more heat from the sun and could burn the foliage.

Make Organic Pesticide

To get rid of mealybugs, mites, aphids, and caterpillars, you can make organic pesticides with coconut oil. This herbicide coats insects and closes off their pores for respiration.

What You’ll Need Is:

  • Coconut oil, two cups
  • organic castile soap, half a cup
  • Neem oil, 1/2 tsp (optional)
  • aerosol can
  • full jar


Castile soap and coconut oil are combined in the empty jar. Shake the jar with the lid on tightly until it turns white. Fill a spray bottle with the diluted solution after diluting it with a little water.

This insecticide has a three-month shelf life. On plants with delicate or thin foliage, avoid using this solution.

Weed Killer

Coconut oil can be used to get rid of weed without harming the environment or important plants. In a saucepan, combine equal portions of vegetable oil and coconut oil and warm over low heat. Additionally, you can add 15–20 drops of neem oil to the mixture to increase its potency.

Transfer the solution to a spray bottle once it has cooled. Spray it on weeds to get rid of them organically after giving it a good shake before use! You must continuously spray this for 5-7 days.

Use it for Cleaning

To remove dirt and filth, mix 1 teaspoon of baking soda with a bowl of coconut oil. On unclean surfaces like those in the kitchen, it works fantastically well!

Great Insect and Mosquito Repellent

In a study conducted at the Department of Agriculture, University of Nebraska in the United States, it was discovered that the medium-chain length fatty acids in coconut oil exhibited the strongest insect repellent efficacy for up to 96 hours during the hot summer.

Apply 50 cc of coconut oil evenly to the exposed portions of the body before going to a garden or any other place where there may be mosquitoes to make it more effective by mixing 4-6 drops of neem oil into it.

Provides Relief from Sunburn

Applying virgin coconut oil to the area will provide you with immediate relief if you developed a sunburn while working long hours in the garden. Additionally, it will lessen redness and swelling.

Natural Sunscreen

This study found that coconut oil has an SPF of around 8, protecting skin from the sun’s damaging UV rays.

Twenty minutes prior to stepping outside in the sun, combine equal quantities of coconut and olive oil and apply it to the exposed areas of the body until it is entirely absorbed.

Acts as a Natural Paw Cream for Pets

Concern should be expressed if an animal has dry, cracked paws. Their feet will remain flexible if coconut oil is applied to them, particularly during the winter months.

Lubricate Castor Wheels

Over time and with repeated use, debris and rust buildup can cause castor wheels to become stuck. The exceptional lubricating properties of coconut oil ensure that the wheels are protected from rust and move smoothly and freely.

After washing the wheels, add a few drops to make them move more easily!

Effective Against Dog Ticks

Dogs suffering from tick, flea, and mange mite infections receive immediate relief because to the antibacterial qualities of coconut oil. By coating their exoskeleton, these pests are also removed from dogs by applying virgin coconut oil. They become immobile and are choked by this.

Inflamed skin on cats and dogs can also be treated with coconut oil’s anti-inflammatory effects, which also improves the condition of their fur.

Apply equal parts of tea tree, neem, peppermint, and coconut oil to the affected area to increase its efficacy.

Great for Hair and Skin

Essential fats found in coconut oil give the skin a smooth texture. According to one study, virgin coconut oil (VCO) moisturises and soothes skin problems’ symptoms. By improving the function of the skin barrier, VCO’s anti-inflammatory effect reduces inflammatory indicators and protects the skin.

VCO’s anticancer, antibacterial, analgesic, antipyretic, and anti-inflammatory characteristics also play a significant role in skin aging, inflammation, and carcinogenesis. Additionally, it offers efficient defense against UVB rays.

Apply a small amount (about the size of a dollop) to your palm and rub it in a circular motion over your face and other body parts until the skin has completely absorbed it. For optimal results, perform this each day just before night.

Additionally beneficial for damaged and dry hair, the oil. This study found that coconut oil, a triglyceride of lauric acid (the primary fatty acid), has a strong affinity for hair proteins and can penetrate inside the hair shaft to provide the moisture and conditioning that the hair shaft requires to stay healthy.

For optimum results, massage lukewarm virgin coconut oil into your scalp and let it sit for 30 to 40 minutes before showering.