Placing a cutting or a single leaf in water is another traditional way of fiddle leaf fig growth. This technique works well for many individuals, and it’s entertaining because you can watch the rooted develop rather than having to wait for growth or yank on the cutting. In the glass container, they also look lovely.
I’ll admit, though, that it’s not my favored method for growing indoor plants, including fiddle leaf figs.
I prefer to make things as favorable to myself as possible whenever I can. As a result, I find that no commercial growers employ the water approach when deciding how to best propagate.
If you give it any thought, however, it makes sense. Since Ficus lyrata is not an aquatic plant, water propagation will not be the best environment for it to flourish in. But since most who attempt it succeed, it must be able to grow quite well in water.
Use a cutting with roughly 3 nodes, as mentioned above, rather than a single leaf for the greatest outcomes. (For an explanation of why using single leaves is not a wise choice, see below.)
Place the sliced piece in fresh water in a dimly lit area. To keep the oxygen levels stable, change the water every several days.
Here is where I fail with this approach. Normally, I forget. In comparison to an unwatered plant pot that seems dry and feels light as a feather, the water in the glass appears the same.
Because plants require oxygen, soil is a better environment for them than water. While there is some oxygen in water, it fades off the surface when the water is motionless. (A bubbler is required in aquariums in order to maintain the water’s oxygen levels.)
Watch for the roots to form; it took my leaf more than 6 weeks to do so. (Results are shown in the section below.)
How long does it take for fiddle leaf fig cuttings to take root?
Keep an eye on your roots system every few days to ensure sure it has adequate water and light by placing it in a well-lit area away from direct sunlight. If the water appears cloudy or muddy, replace it with fresh, chlorine-free water at room temperature.
Step 5: Wait One Month
Your cutting’s roots typically take a month to mature. After around three weeks, you can see the roots growing at the base of the plant. Up to the point that you’re ready to replant, let them grow for another week or so.
Step 6: Plant Your New Rooted Cutting
For the first two months of growth, plant your newly rooted cutting in moist potting soil and be sure to keep it consistently moist to allow the roots to take hold.
How is a fiddle leaf fig cutting rooted?
To explore if roots could develop from a single leaf, I started with a leaf and four stem cuttings. I placed the other 2 stem cuttings in damp potting soil after placing the bases of 2 stem cuttings and 1 leaf in water.
The cuttings should be kept in a water-filled, clean glass vase in a warm, well-lit area away from the sun. I just changed the water when it was foggy, which only happened a few times. Use tap water that is at room temperature and wait a day for the chlorine to dissipate before using.
On the stem base of the watered-down cuttings, a few tiny popcorn-like spots started to develop after 4 weeks.
Wow, roots are developing in the water after 6–8 weeks! Water replacement is not necessary at this time.
You can place the rooted Fiddle Leaf Fig cuttings in soil and watch them grow once the roots are around 1 to 2 inches long!
Can a fiddle leaf fig be grown from a leaf cutting?
Fiddle-leaf figs can be multiplied using a few various techniques, including air layering and stem or leaf cuttings, however it takes some time.
With the former, you can grow new miniature plants for your collection, as gifts, or to make use of the leaves and branches you’ve cut off. When trying to save and repot a fiddle-leaf fig that has experienced leaf drop and all of its growth has gathered at the top of a tall, barren stem, the later procedure is helpful. Here are the steps for each of these alternatives.
What happens if the top of a fiddle leaf fig is chopped off?
Your fiddle leaf fig probably has no other branches that will allow it to transition from a fiddle leaf shrub to a fiddle leaf tree. In addition, bear the following in mind before proceeding:
The amount of regrowth that results from pruning depends on how severe it was. The reason for this is that the plant is trying to grow again in an effort to balance the root system below with the shoot system above, which is now designed to support the plant at its bigger size before trimming.
Usually, the most active shoot growth takes place 6 to 8 inches after the pruning cut.
Make the cut on your fiddle leaf fig
Make a decision regarding the size of the Ficus lyrata cut. Once more, the branching will be more noticeable the longer a part is clipped. (And the less the plant will grow in height, at least for that shoot.)
Your fiddle leaf fig won’t be encouraged to generate as many lateral branches off of the main trunk if you simply pinch out the fresh buds at the top with your fingers.
If you want to encourage a little lateral development to make your plant appear fuller near the top, pinching is more helpful.
On the other hand, you’ll see a lot more branching if you remove 12 of the top shoots.
Choose the node that you want to cut above. The spots on stems known as nodes are where leaves, buds, or branches can grow. However, not every node has leaves or branches; some nodes may only have a mark and a little thickening of the stem. Internodes are the parts of the stem that lie between the nodes.
3. Make use of a clean pair of pruners. Just above the top of your node, make the cut. Cut just above the node rather than into it, which would harm it.
Any plant in the fig family, including your fiddle leaf fig, will exude an oozing, milky, white sap when cut. Simply avoid eating it, getting it in your eyes, or letting it land on the carpet because it can be annoying.
4. As a final piece of advice, wait to remove leaves from the trunk of your fiddle leaf until the new branches have begun to grow. Your plant should be as robust as possible because those leaves aid in the development of the new lateral buds.
(Are you wondering what to do with the plant pieces you pruned? Why not cultivate a second fiddle leaf fig?
I’m done now! Now, give your new lateral buds, which will eventually grow into branches, a few weeks. While the exact length of time varies on a number of variables, your chances of success are higher if you attempt this in the spring, when fiddle leaves are actively growing, as opposed to the winter, when they are largely dormant. In comparison to winter, when the plant will need more time to heal the cut and form new buds, springtime will see rapid new development.
Can you cut a fiddle leaf fig’s stem?
Similar to sculpting a masterpiece, shaping your fiddle leaf fig requires that you start with an idea of what you want the finished product to look like.
To ensure that the remaining foliage looks balanced, I find it helpful to label all the branches you want to remove with colorful tape or a Post-it Note before you begin. To lessen the risk of shock, start out gently and never remove more than 10% of your plant at once.
Decide on Your Ideal Shape
Fiddle leaf fig plants often have one of two shapes: a bush or a tree.
Smaller plants are typically bushier, whereas larger plants are typically more fashioned like trees. You might want to start shaping your little plant into a tree as it grows. Choose whether you want to prune your plant to maintain its compact bush shape or to give it a correct tree shape.
Plan to Remove Damaged Leaves or Branches
So that you can arrange to eliminate the least healthy parts of your plant first, evaluate the general health of each branch and group of leaves. Mark any sections that need to be removed if there are any leaves with brown spots or branches with smaller leaf growth.
Remove Crossing Branches
To increase airflow and relieve crowding, you should eliminate some portions of densely populated branches. You should take care of any branches that touch each other as well as any leaves that are preventing one another’s leaves from growing.
Create Your Ideal Shape
Any growth that is 8 to 10 inches or less from the ceiling, the surrounding walls, or the furniture should be planned for removal. Next, cut off any growth that does not conform to your ideal shape.
Remove lower leaves and branches to reveal a good trunk if you want to create a tree-like shape. Remove gangly or ugly growth if your plant is out of balance to give it a more appealing overall form.
How to Make Your Cuts
Pruning should begin once you’ve marked the sections you want to cut out and made sure you like the way the tree looks in its finished form. When pruning your plant, make sure the cutting motion does not crush or harm the stem by using a sharp, clean tool.
Cut each one away from the trunk or any leaves by about a half-inch. With no chance of infection spreading to the main trunk or any surviving leaves, this enables your plant to heal properly. In order to prevent the spread of bacteria and diseases, pick up and dispose of any falling leaves or garbage.
New Growth After Pruning
If your plant is healthy, it will typically divide the branch where it was pruned, producing two branches where one once was.
Eventually, this creates the impression of a fuller, healthier plant. Your plant might only continue to develop one branch where it was clipped if it is in pain or isn’t getting enough light. After pruning, allow access to lots of light to promote more development.
Fertilize After Pruning
Fertilize your plant frequently after pruning to promote new growth and aid in the plant’s recovery from the shock of pruning. (Are you unsure of the ideal fertilizer for your fiddle leaf fig? Test out our plant food! Within a few weeks to a month after pruning your plant, you ought to notice new growth.
What kind of soil are ideal for fiddle leaf figs?
In a well-lit space, the fiddle leaf fig tree creates a striking living sculpture with its tall, columnar structure and large, gangly leaves. Fiddle-leafs are a bright, eye-catching indoor plant that may be grown outdoors in USDA Zones 10 and 11.
The ficus lyrata, sometimes known as the fiddle-leaf fig, is known for being picky. It is true that fiddle-leaves suffer when the soil is either too dry or too wet, when there is either too much or too little sunlight, when the air is either too dry or too humid, and when the region is cool and drafty. But if we take care of a fiddle leaf fig plant properly, it can live for many years indoors. Fiddle leaf fig maintenance is simple and enjoyable!
Best Soil for Fiddle Leaf Figs
Your fiddle-leaf plant should be planted in a loose, humus-rich, well-drained potting medium. Use our Fiddle Leaf Fig Soil or an indoor potting mix. To increase the drainage and aeration around the roots, we advise adding one-third to one-half of a cactus potting mix, such as the one created especially by Perfect Plants for succulents and cacti, to the soil of indoor houseplants.
Fiddle Leaf Fig Watering
Carefully water your indoor fiddle leaf fig tree. Watering the violin-shaped leaves too much or too little has a similar affects, causing them to wilt and eventually drop. Water deeply with tepid water till water drains out the bottom after waiting until the top inch of soil feels dry to the touch down to approximately an inch deep.
Your fig will require less watering in the winter and more watering in the summer (perhaps once a week) (maybe once a month). Overwatering is the most frequent reason for early death in fiddle-leaf figs. You can tell when your fiddle leaf needs a drink by paying attention to it. You don’t want water at the bottom of the pot, damp feet, warm, humid temperatures, or root rot.
Fiddle Leaf Fig Light Requirements
The fiddle-leaf fig prefers filtered indirect light to direct sunlight. A fig’s leaves will scorch, become yellow, and fall off in full sun; in an overly dark location, the green leaves will shrivel and fall off. A window facing east that provides intense indirect light and is not too close to the sun so that the sun’s rays touch the leaves is the ideal location. Dropped leaves are a warning sign that something is amiss with your plant, so keep an eye on it.
Keep in mind that the amount of sunshine that enters a sunny window changes with the seasons. When the sun is higher in the sky during the summer, its direct rays do not reach as far into the room as they do in winter when it is closer to the horizon. As the indoor plant grows and leans toward the indirect light, rotate it occasionally. Our goal is to keep its symmetry. For a large houseplant, a rolling plant stand can be quite helpful.
Other Plant Requirements
To stop fungus diseases from taking root, there should be a moderate air flow surrounding the plant. A ceiling fan works wonders for this. Avoid chilly drafts from the air conditioner in the summer or from drafty windows in the winter. Cold drafts can cause leaves to drop, dry down, turn yellow, or brown with patches. If you think your plant might become cold or have leaf drop, move it.
Warm up your fig. Fiddle-leaves require a minimum temperature of about 50F during the winter. The ideal summertime temperature range is 60 to 75 F, with the cooler nighttime lows.
Because it is a native of the tropics, the fiddle-leaf fig needs a warm, humid climate, particularly in the winter when most homes have extremely dry air. In contrast to most homes, which have relative humidity levels of around 10% in the winter, fiddle-leaf figs thrive in environments between 30% and 60% RH. The ideal location for a local-use humidifier is close to the tropical plant to ensure appropriate humidity.
Regular misting of the fig’s leaves is a nice backup option. Grow numerous more indoor plants close by to increase the humidity in the area. Place the grow or container of the fig over a tray of water: In a big saucer, spread a layer of gravel, then add water until it is just below the gravel. Over the gravel, place the fig’s container. The humidity around the plant will increase when evaporation from this “humidity tray” occurs.
Best Fertilizer for Fiddle Leaf Fig
For best results, use slow-release fertilizer on fiddle leaves. Use Perfect Plants Fiddle Leaf Fig Fertilizer on your fiddle-leaf roughly every six months throughout the spring and summer growth period. Follow the label’s instructions for adding fertilizer to the current pot’s top layer of soil. It will specify how much to use for each pot size.
Fertilize not during the winter. This fertilizer is also available on Amazon Prime for no shipping fees. To maintain the flow of vital nutrients, ficus lyrata needs fiddle leaf fig plant food. A 16-5-11 NPK ratio is used.
When to Repot Fiddle Leaf Fig
Each year to three years, repot your fiddle leaf fig. We don’t want the roots to get root bound and obstruct the drainage openings in the container. Untie root systems that are confined to pots and cut off any that are overly lengthy. Repot the plant in a container that is only slightly bigger than the original after shaking out part of the old potting soil.
After carefully pruning the root ball and adding fresh potting soil, you can put your fiddle-leaf back in the same container if it has already grown to the desired size. Don’t remove more than 20% of the root ball when trimming. By trimming the roots, you can prevent the plant from growing too large. Spring is the ideal season for repotting. sturdy trunk to support the slender plant stem. The light may pull a plant in any direction, allowing it to grow. When the huge fiddle leaf fig tree is the desired height, pinch off the top of the main stem. A stronger and more tightly packed houseplant will result from this. Repotting and trimming should be done in the spring to give the fig a full growing season to recover.
Pests on Fiddle Leaf Fig Indoors
Pest insects including aphids, mealybugs, scale insects, spider mites, or whiteflies occasionally affect figs. Regularly check the large leaves and young stems for signs of infection, and if any appear, spray or clean the leaves with an insecticidal soap. You can create your own bug-killing solution by mixing one quart of water with two tablespoons of a light liquid soap, such Dawn or Castile.
Wipe your fig leaves occasionally with a moist towel to keep them bright and clean. By removing the covering of dust, which can obstruct vital metabolic activities including transpiration, CO2 intake, and photosynthesis, the fig not only looks better.