Sooner or later, you’re going to want to understand how to assist your fiddle leaf fig in branching if you want it to take on the desired tree-like shape.
A plant’s natural tendency is to climb upward so that it can compete with other plants for more sunlight. Therefore, sometimes it requires a little human assistance to motivate them to branch outward.
If you’ve ever pruned a hedge or vine-like plant, you know how important it is for getting lush, bushy growth. That also holds true for your fiddle leaf fig! When a stem, branch, or trunk is cut back, several stems are likely to emerge in its place.
In order to encourage your Fiddle Leaf Fig to branch, apply the following three techniques. Also, watch the video below to see me prune my own Fiddle Leaf Fig.
Why should I Wiggle my Fiddle leaf fig?
Your indoor tree’s trunk can be moved to simulate wind, which will help you become more resilient outside. You can also leave your tree outside for extended periods of time to strengthen its trunk and expose it to the elements. Once you get the leaves inside, be sure to inspect them for bugs.
What are the best growing conditions for an indoor fiddle leaf fig tree?
Know that your fiddle leaf fig tree prefers moderate temperature changes and place it in a sunny spot within the house. The tree should be planted in a container with well-draining soil that is kept humid but not soggy since this might cause root rot.
Why isn’t my fiddle leaf fig tree flowering?
You should be careful not to overwater your fiddle leaf fig because it is prone to root rot. When storing the fig within a container, make sure the bottom has lots of holes to allow for proper drainage.
How do I fix a leggy fiddle leaf fig tree?
Give a leggy or tilted fiddle leaf fig tree bright, filtered sunshine as treatment. Please place your plant in the area of the house that gets the most indirect sunlight, which is usually six to eight hours per day. Don’t keep it in the Sun for too long, though; doing so could scorch the leaves.
Will wiggling my fiddle leaf fig tree weaken its roots?
Every one to two weeks, wiggle your fiddle leaf fig tree for 1.5 to 2 minutes to significantly thicken the trunk. Beginning with light shaking, progressively build up the force. If your plant is stake-supported, move it about at first with the support in place. You can take the stake out once your fig tree has gotten used to this practice.
Can you sever a fiddle leaf fig’s branch?
It’s a good idea to spread out a few sheets of newspaper around your plant before you begin so that it will protect the flooring from any falling debris and the milky latex sap that will unavoidably leak out.
Keep the poisonous latex away from your skin and out of children’s and animals’ reach. It is advised that you wear long sleeves and gloves.
Additionally, it’s crucial to use a fresh, well-kept pair of pruners. Clean them with soap and hot water if you aren’t sure if you cleaned them after the last time you used them. Prior to usage, properly dry them.
Working with the main trunk or stem is how you prune a plant that has grown too tall. This branch can be the only one the tree has, depending on how your plant is shaped.
Find the area of the branch you wish to trim before making a cut. After that, lean in close to inspect the trunk. An internodal space, or a location on the trunk that is between two nodes, is what you’re looking for.
Nodes, which grow into leaves or branches, are merely slightly elevated rings in the bark of an F. lyrata tree.
Make a diagonal cut directly between the two nodes, and then use a damp cloth to clean away the sap. Expect to observe fresh lateral branches emerging from the node immediately beneath your cut within a few weeks.
It is well known that F. lyrata reaches for the light. If you want to prevent having a lopsided plant, be careful to rotate the planter every few days. Unfortunately, we occasionally forget to do this and our plants end up excessively leaning to one side.
Or perhaps you need to remove some lateral branches because the foliage is too dense.
You may encourage greater airflow between those lovely, gigantic leaves by cutting back on a few branches, which will help you prevent insect and disease problems.
Make sure, however, that you never remove more than 10% of the fiddle-leaf fig at one time.
Cutting too closely to the trunk increases the chance of injuring the branch collar’s tissue, which could then allow disease germs to enter the trunk.
If the branch is cut too close, it may remain attached and rot, possibly leading to the degradation of the branch collar and opening the door for infection.
Simply clip them off at the base with your pruners if you only need to remove a few sick or dead leaves from your plant here and there.
What makes your fiddle leaf fig worth shaking?
“To keep my fiddle upright while it was young and immature, I used a wooden dowel. I was able to remove the dowel and it no longer need extra support because it was able to strengthen itself over time as it grew and with frequent shakings, Paige added.
So even though I wouldn’t advise you to shake your plants firmly, giving them a gently rock would not harm them. In addition to your FLF, I can see this idea working well for Rubber plants, Monsteras, Alocasia, and Pilea plants. They all have thick stems that frequently need to support a lot of weight as the leaves enlarge. This will probably become a regular component of how I take care of my plants. Play some music, get moving, and invite my plants to join in. It seems like it would be enjoyable.
Is shaking beneficial to plant growth?
A rising number of plant enthusiasts claim that occasionally shaking indoor houseplants can promote growth and strengthen stems.
The unique plant-shaking tip has gained popularity on social media, but gardening experts have cautioned that it only works for rubber greenery, fiddle leaf fig, monstera, alocasia, and pilea.
The method of gently shaking is supposed to “imitate” the movement of the “wind” in nature, so encouraging the indoor plant to become stronger over time.
“Who else rattles their fiddle fig indoors?” In the Facebook page for Crazy Indoor Plant People Australia, Amanda from New South Wales stated, “It duplicates wind and reinforces them so they sit upright instead of sagging.”
A increasing number of plant lovers suggest that occasionally shaking indoor houseplants can encourage growth and strengthen stems (stock image)
What are the benefits of shaking houseplants?
Plant enthusiasts asserted that shaking indoor houseplants occasionally can encourage growth and strengthen stems.
However, gardening experts cautioned that the technique only truly excels with rubber greenery, monstera, alocasia, and fiddle leaf fig.
How does notching cause a tree to develop new branches?
Yes, you can use notching to encourage branching if you purchase trees from a nursery that have few branches (feathers). This is crucial to eliminate or lessen the likelihood of blind wood in trees meant for high-density training systems (such tall spindles). The response of younger trees to notching is greater than that of older trees. As illustrated in the accompanying figure, you can make a notch above the bud using a hacksaw or a tiny knife. Without harming or destroying the wood, we remove a very small bit of bark when notching. By inhibiting the hormone (auxin) that blocks the growth of lateral shoots, this encourages branching. For notching, you should concentrate on the region between 30 and 60 inches above the earth surface. Even while you can begin notching as soon as the seeds are planted, waiting until the new shoots are between one and three inches long would be preferable since you can more clearly identify the buds that did not break.
ideal for PGR and notching applications. Continue doing that up until it’s finished.
I would advise you to remove a couple of huge branches during dormant pruning by making a bevel cut, followed two weeks before bud break by notching and PGR sprays. Leaving a lot of huge limbs on the tree prevents any new branches from growing in the leader, which results in blind wood by sapping the main trunk of its carbohydrate supplies.
Should I remove the fiddle leaf fig’s bottom leaves?
Similar to sculpting a masterpiece, shaping your fiddle leaf fig requires that you start with an idea of what you want the finished product to look like.
To ensure that the remaining foliage looks balanced, I find it helpful to label all the branches you want to remove with colorful tape or a Post-it Note before you begin. To lessen the risk of shock, start out gently and never remove more than 10% of your plant at once.
Decide on Your Ideal Shape
Fiddle leaf fig plants often have one of two shapes: a bush or a tree.
Smaller plants are typically bushier, whereas larger plants are typically more fashioned like trees. You might want to start shaping your little plant into a tree as it grows. Choose whether you want to prune your plant to maintain its compact bush shape or to give it a correct tree shape.
Plan to Remove Damaged Leaves or Branches
So that you can arrange to eliminate the least healthy parts of your plant first, evaluate the general health of each branch and group of leaves. Mark any sections that need to be removed if there are any leaves with brown spots or branches with smaller leaf growth.
Remove Crossing Branches
To increase airflow and relieve crowding, you should eliminate some portions of densely populated branches. You should take care of any branches that touch each other as well as any leaves that are preventing one another’s leaves from growing.
Create Your Ideal Shape
Any growth that is 8 to 10 inches or less from the ceiling, the surrounding walls, or the furniture should be planned for removal. Next, cut off any growth that does not conform to your ideal shape.
Remove lower leaves and branches to reveal a good trunk if you want to create a tree-like shape. Remove gangly or ugly growth if your plant is out of balance to give it a more appealing overall form.
How to Make Your Cuts
Pruning should begin once you’ve marked the sections you want to cut out and made sure you like the way the tree looks in its finished form. When pruning your plant, make sure the cutting motion does not crush or harm the stem by using a sharp, clean tool.
Cut each one away from the trunk or any leaves by about a half-inch. With no chance of infection spreading to the main trunk or any surviving leaves, this enables your plant to heal properly. In order to prevent the spread of bacteria and diseases, pick up and dispose of any falling leaves or garbage.
New Growth After Pruning
If your plant is healthy, it will typically divide the branch where it was pruned, producing two branches where one once was.
Eventually, this creates the impression of a fuller, healthier plant. Your plant might only continue to develop one branch where it was clipped if it is in pain or isn’t getting enough light. After pruning, allow access to lots of light to promote more development.
Fertilize After Pruning
Fertilize your plant frequently after pruning to promote new growth and aid in the plant’s recovery from the shock of pruning. (Are you unsure of the ideal fertilizer for your fiddle leaf fig? Test out our plant food! Within a few weeks to a month after pruning your plant, you ought to notice new growth.