Sooner or later, you’re going to want to understand how to assist your fiddle leaf fig in branching if you want it to take on the desired tree-like shape.
A plant’s natural tendency is to climb upward so that it can compete with other plants for more sunlight. Therefore, sometimes it requires a little human assistance to motivate them to branch outward.
If you’ve ever pruned a hedge or vine-like plant, you know how important it is for getting lush, bushy growth. That also holds true for your fiddle leaf fig! When a stem, branch, or trunk is cut back, several stems are likely to emerge in its place.
In order to encourage your Fiddle Leaf Fig to branch, apply the following three techniques. Also, watch the video below to see me prune my own Fiddle Leaf Fig.
Why should I Wiggle my Fiddle leaf fig?
Your indoor tree’s trunk can be moved to simulate wind, which will help you become more resilient outside. You can also leave your tree outside for extended periods of time to strengthen its trunk and expose it to the elements. Once you get the leaves inside, be sure to inspect them for bugs.
What are the best growing conditions for an indoor fiddle leaf fig tree?
Know that your fiddle leaf fig tree prefers moderate temperature changes and place it in a sunny spot within the house. The tree should be planted in a container with well-draining soil that is kept humid but not soggy since this might cause root rot.
Why isn’t my fiddle leaf fig tree flowering?
You should be careful not to overwater your fiddle leaf fig because it is prone to root rot. When storing the fig within a container, make sure the bottom has lots of holes to allow for proper drainage.
How do I fix a leggy fiddle leaf fig tree?
Give a leggy or tilted fiddle leaf fig tree bright, filtered sunshine as treatment. Please place your plant in the area of the house that gets the most indirect sunlight, which is usually six to eight hours per day. Don’t keep it in the Sun for too long, though; doing so could scorch the leaves.
Will wiggling my fiddle leaf fig tree weaken its roots?
Every one to two weeks, wiggle your fiddle leaf fig tree for 1.5 to 2 minutes to significantly thicken the trunk. Beginning with light shaking, progressively build up the force. If your plant is stake-supported, move it about at first with the support in place. You can take the stake out once your fig tree has gotten used to this practice.
How can a fiddle leaf fig develop numerous branches?
Our first achievement is the tree you can see here. We cut back the lower leaves to reveal the primary trunk after the branches sprouted. Since then, we have had a 100% success record in producing several branches on three additional trees we chopped in similar manner.
The most crucial tip is to clip a Fiddle Leaf Fig stem lower, to the area that is most woody. Your fiddle leaf fig’s main stem or trunk needs to be at least 3 tall to accomplish this.
Since we don’t want to lop our lovely plants in half, the majority of us simply pinch off the very top tips or cut a tiny section of the branch off at the top. However, we must prune the Fiddle Leaf Fig at a distance of 18 or more inches from the top of the stem in order to reach the woody area in order for it to sprout several branches.
Buds develop significantly more slowly when a stem is cut at a lower, woody point than they do when the plant’s top, green portion is clipped. This prevents a bud that is growing extremely quickly from taking control and gives the chance for other buds to form at once.
As you can see, within a few weeks, this tree sprouted 6 new branches after we nearly cut our extremely tall Fiddle Leaf Fig in half at a particularly woody region.
How can a tree become a bush?
You require a little tree to serve as the garden’s centerpiece. Instead, pick a shrub and utilize basic pruning methods to turn it from a bush into a lovely tree. You can produce a unique plant that adds a touch of class to your yard when you prune a shrub into a little tree. For this method to work, you don’t even need to be an expert in plants or good with pruners.
The greatest shrubs to grow into trees are those that don’t normally produce a lot of suckers from the roots (suckers). Numerous varieties of shrubs, from floral beauties to shrubs with fall color, are included in this group. Lilac, flowering quince, panicle hydrangea (Hydrangea paniculata), and spring-blooming star magnolia are some examples of flowering shrubs that can grow into trees (Magnolia stellata).
Many berried bushes grow into lovely little trees that provide the garden winter appeal. Pyracantha, Siebold viburnum (Viburnum sieboldii), and sea buckthorn are members of this group (Hippophae rhamnoides). Another excellent shrub to grow into a small tree is cotoneaster. Choose upright cotoneaster cultivars like Cotoneaster divaricatus or Peking cotoneaster (Cotoneaster ludicus) for the best results.
Sucker-producing shrubs are the most challenging to grow into trees. These suckers typically grow in small thickets when left to their own devices. Elderberry, chokecherry, and red twig dogwood are shrubs that can produce thickets. These shrubs can be trained to grow into tiny trees; however, it could require a bit more work.
Pruning suckering shrubs into multi-stemmed trees, where you choose a number of upright stems to act as trunks, is an option. For a beautiful multi-stemmed little tree, try the bottlebrush poinciana or pineapple guava in warmer climates. Consider witch hazel, serviceberry, or imitation orange in regions with chilly winters.
Smaller plants are simpler to teach when selecting shrubs to grow into trees. Gardening isn’t just about growing bushes into trees right away. It takes years to complete the process. Start with a plant that is around a year old if you wish to train your shrub into a tiny tree with a single trunk. One to two gallons may be used for a container. When grown as a multi-trunked tree, more mature shrubs produce better results.
Prior to planting, decide which stem will serve as the tree’s trunk. Remove branches from the shrub’s bottom third after planting. Place a sturdy stake next to the main stem, such as a tree stake or a chunk of rebar. On a tree with multiple stems, place a stake for each one. Fix the stem to the base with a tie. Rub out or trim any little sprouts that develop along the trunk as the shrub grows.
Remove lower branches each spring so that the trunk makes up one-third of the tree’s height. Till the tree reaches the desired height, repeat this technique every spring. Then, reduce the canopy to three to five major branches, then prune those branches back by three to five inches to promote branching. Thin the canopy as necessary and cut off any branches that sprout along the trunk to maintain your shrub-tree.
Do fig plants benefit from coffee grounds?
Coffee grinds might be an excellent addition if you have alkaline soils or want to lower the pH level of your garden soil because fig plants like acidic soil. The addition of coffee grinds close to the root zone will aid in moisture retention and generate soft spots for new roots to enter. If adding coffee grounds close to the tree, make sure the soil is thoroughly mixed with them before spreading them to prevent hard, dry spots from forming.
What makes your fiddle leaf fig worth shaking?
“To keep my fiddle upright while it was young and immature, I used a wooden dowel. I was able to remove the dowel and it no longer need extra support because it was able to strengthen itself over time as it grew and with frequent shakings, Paige added.
So even though I wouldn’t advise you to shake your plants firmly, giving them a gently rock would not harm them. In addition to your FLF, I can see this idea working well for Rubber plants, Monsteras, Alocasia, and Pilea plants. They all have thick stems that frequently need to support a lot of weight as the leaves enlarge. This will probably become a regular component of how I take care of my plants. Play some music, get moving, and invite my plants to join in. It seems like it would be enjoyable.
Is shaking beneficial to plant growth?
A rising number of plant enthusiasts claim that occasionally shaking indoor houseplants can promote growth and strengthen stems.
The unique plant-shaking tip has gained popularity on social media, but gardening experts have cautioned that it only works for rubber greenery, fiddle leaf fig, monstera, alocasia, and pilea.
The method of gently shaking is supposed to “imitate” the movement of the “wind” in nature, so encouraging the indoor plant to become stronger over time.
“Who else rattles their fiddle fig indoors?” In the Facebook page for Crazy Indoor Plant People Australia, Amanda from New South Wales stated, “It duplicates wind and reinforces them so they sit upright instead of sagging.”
A increasing number of plant lovers suggest that occasionally shaking indoor houseplants can encourage growth and strengthen stems (stock image)
What are the benefits of shaking houseplants?
Plant enthusiasts asserted that shaking indoor houseplants occasionally can encourage growth and strengthen stems.
However, gardening experts cautioned that the technique only truly excels with rubber greenery, monstera, alocasia, and fiddle leaf fig.
Should I remove my fiddle leaf fig’s bottom leaves?
You should be aware of what those bottom leaves do before selecting when to remove them.
Lower foliage has the same function as that fresh, vibrant growth up top: the leaves work to mix that green chlorophyll, commonly known as “the meat of the leaf,” with sunlight, carbon dioxide, and water to produce sap, the plant’s own sweet food.
So let them alone if you want the trunk, roots, and new growth to continue receiving energy from the sun through the foliar producers and absorbing it.
Another advantage of the lower leaves is that this is typically where the most frequent watering issues show up. To put it another way, many owners of fiddles may detect overwatering and underwatering based on early warning indicators from these bottom leaves. You lose access to one of the plant’s early warning systems if you remove them.
Keep in mind that the lower leaves should be saved for the very last stage of shaping because they AID in giving the tree its characteristic shape.
Once more, deciding whether or not to remove these lower leaves depends on what they do for the plant.
How may new branch growth be encouraged?
One of the finest strategies to promote a tree branch’s growth is pruning. A branch can grow more quickly if upper-story plants are pruned and thinned to provide room for more light to reach a struggling understory tree or bush.
How should a fiddle leaf fig tree be shaped?
As I indicated earlier, many growers like to cultivate a traditional tree shape, complete with a distinct canopy and trunk. However, F. lyrata tends to grow in a columnar or bushy shape when kept as a houseplant.
In the wild, F. lyrata does this on its own by losing its lower leaves and growing into its original shape as a banyan tree.
like the renowned “Wild F. lyrata and ordinary banyan, F. benghalensis, both start out their lives as epiphytes. When a seed falls into another tree’s canopy, it germinates, develops, and eventually strangles its host plant as it descends to the ground.
Your houseplant won’t do this, of course, but the tree shape is attractive. How can a rambunctious F. lyrata be transformed into a tall, graceful specimen?
First off, if you’ve recently acquired a highly sought-after fiddle-leaf, hold off on starting to prune it into a tree shape.
Whatever two-thirds of the intended height means to you within the boundaries of your space, let it grow to that point. The trunk might become strong and thick as a result.
It’s advisable to top the tree out at least eight to ten inches away from the ceiling if you want it to grow tall.
This not only improves the appearance but also prevents the top leaves from bending and slamming against your ceiling.
Say, for instance, that you want to top your tree off at about seven or eight feet and that your home has nine-foot ceilings. You shouldn’t begin trimming for lateral growth until the trunk is at least five feet tall based on these measurements.
Wait until spring or summer when the plant is actively growing before pruning your fiddle-leaf fig to generate a tree form with branching lateral growth. Then, make a cut at least six inches down from the tip of the tree.
You can preserve and grow this cutting! Cut in an internodal space, if possible.
Don’t remove the leaves that are below the cut. So that the plant can photosynthesize and generate energy to grow those lateral branches, you want them to stay.
Within a few weeks, your F. lyrata will start to branch from the cut. Although this tree occasionally produces just one branch, it frequently produces two or three additional lateral branches.
You can remove one or two leaves from the tree’s base once the new branches have developed leaves.
The hue of the leaves and emerging branches will deepen as the canopy ages. Feel free to remove one or two more leaves from the bottom part of the trunk once you become aware of this.
You can continue to prune leaves away from the tree’s trunk as the canopy grows over time. You’ll eventually grow a tidy trunk that supports a Y-shaped canopy.
Note: Some knowledgeable gardeners enjoy using a technique called “creating lateral branches by notching. Using this technique, the gardener carefully cuts through two nodes. This cut is supposed to encourage the tree to generate lateral branches without losing height.
Because of the fast growth of F. lyrata and the fact that we are confident that pruning for lateral branch growth yields reliable results, we advise using this technique to produce that attractive canopy.
After pruning, give your plant the best care possible by providing it with the right amount of water, fertilizer, and light, which will hasten the healing of its wounds.