How To Divide Fiddle Leaf Fig

It’s a good idea to separate your fiddles if the soil on one of them turns rock-hard and begins to peel away from the pot’s sides because you’ll need to repot it shortly. (Just be sure to first trim the roots. This is how to do it:)

Be sure to gently massage the root ball when you unpot the plant to break up any old, dried-out soil. Take out as much of the old soil as you can from the roots.

Your fiddle (or fiddles) should be repotted in a pot that is the right size, has drainage, and is filled with new soil that drains properly.

Can a fiddle leaf be cut in half?

Similar to sculpting a masterpiece, shaping your fiddle leaf fig requires that you start with an idea of what you want the finished product to look like.

To ensure that the remaining foliage looks balanced, I find it helpful to label all the branches you want to remove with colorful tape or a Post-it Note before you begin. To lessen the risk of shock, start out gently and never remove more than 10% of your plant at once.

Decide on Your Ideal Shape

Fiddle leaf fig plants often have one of two shapes: a bush or a tree.

Smaller plants are typically bushier, whereas larger plants are typically more fashioned like trees. You might want to start shaping your little plant into a tree as it grows. Choose whether you want to prune your plant to maintain its compact bush shape or to give it a correct tree shape.

Plan to Remove Damaged Leaves or Branches

So that you can arrange to eliminate the least healthy parts of your plant first, evaluate the general health of each branch and group of leaves. Mark any sections that need to be removed if there are any leaves with brown spots or branches with smaller leaf growth.

Remove Crossing Branches

To increase airflow and relieve crowding, you should eliminate some portions of densely populated branches. You should take care of any branches that touch each other as well as any leaves that are preventing one another’s leaves from growing.

Create Your Ideal Shape

Any growth that is 8 to 10 inches or less from the ceiling, the surrounding walls, or the furniture should be planned for removal. Next, cut off any growth that does not conform to your ideal shape.

Remove lower leaves and branches to reveal a good trunk if you want to create a tree-like shape. Remove gangly or ugly growth if your plant is out of balance to give it a more appealing overall form.

How to Make Your Cuts

Pruning should begin once you’ve marked the sections you want to cut out and made sure you like the way the tree looks in its finished form. When pruning your plant, make sure the cutting motion does not crush or harm the stem by using a sharp, clean tool.

Cut each one away from the trunk or any leaves by about a half-inch. With no chance of infection spreading to the main trunk or any surviving leaves, this enables your plant to heal properly. In order to prevent the spread of bacteria and diseases, pick up and dispose of any falling leaves or garbage.

New Growth After Pruning

If your plant is healthy, it will typically divide the branch where it was pruned, producing two branches where one once was.

Eventually, this creates the impression of a fuller, healthier plant. Your plant might only continue to develop one branch where it was clipped if it is in pain or isn’t getting enough light. After pruning, allow access to lots of light to promote more development.

Fertilize After Pruning

Fertilize your plant frequently after pruning to promote new growth and aid in the plant’s recovery from the shock of pruning. (Are you unsure of the ideal fertilizer for your fiddle leaf fig? Test out our plant food! Within a few weeks to a month after pruning your plant, you ought to notice new growth.

Can fiddle leaf figs be trimmed down and replanted?

Taking a stem or leaf cutting from a fiddle leaf fig plant and letting it root in water or soil will result in a new, self-sustaining plant. Most houseplants can be propagated, albeit with different degrees of difficulty. In reality, fiddle leaf figs are rather simple to grow.

What happens if the top of a fiddle leaf fig is chopped off?

Your fiddle leaf fig probably has no other branches that will allow it to transition from a fiddle leaf shrub to a fiddle leaf tree. In addition, bear the following in mind before proceeding:

The amount of regrowth that results from pruning depends on how severe it was. The reason for this is that the plant is trying to grow again in an effort to balance the root system below with the shoot system above, which is now designed to support the plant at its bigger size before trimming.

Usually, the most active shoot growth takes place 6 to 8 inches after the pruning cut.

Make the cut on your fiddle leaf fig

Make a decision regarding the size of the Ficus lyrata cut. Once more, the branching will be more noticeable the longer a part is clipped. (And the less the plant will grow in height, at least for that shoot.)

Your fiddle leaf fig won’t be encouraged to generate as many lateral branches off of the main trunk if you simply pinch out the fresh buds at the top with your fingers.

If you want to encourage a little lateral development to make your plant appear fuller near the top, pinching is more helpful.

On the other hand, you’ll see a lot more branching if you remove 12 of the top shoots.

Choose the node that you want to cut above. The spots on stems known as nodes are where leaves, buds, or branches can grow. However, not every node has leaves or branches; some nodes may only have a mark and a little thickening of the stem. Internodes are the parts of the stem that lie between the nodes.

3. Make use of a clean pair of pruners. Just above the top of your node, make the cut. Cut just above the node rather than into it, which would harm it.

Any plant in the fig family, including your fiddle leaf fig, will exude an oozing, milky, white sap when cut. Simply avoid eating it, getting it in your eyes, or letting it land on the carpet because it can be annoying.

4. As a final piece of advice, wait to remove leaves from the trunk of your fiddle leaf until the new branches have begun to grow. Your plant should be as robust as possible because those leaves aid in the development of the new lateral buds.

(Are you wondering what to do with the plant pieces you pruned? Why not cultivate a second fiddle leaf fig?

I’m done now! Now, give your new lateral buds, which will eventually grow into branches, a few weeks. While the exact length of time varies on a number of variables, your chances of success are higher if you attempt this in the spring, when fiddle leaves are actively growing, as opposed to the winter, when they are largely dormant. In comparison to winter, when the plant will need more time to heal the cut and form new buds, springtime will see rapid new development.

How do you grow fiddle leaf figs that are bushier?

The quickest and safest approach to encourage your fiddle leaf fig to branch out is without a doubt pruning! It entails cutting your Fiddle Leaf Fig’s stem off at the height you want branches to emerge from. Remember that you may always propagate your Fiddle Leaf Fig and grow a brand-new plant from the clipped portion!

Pruning works by reawakening buds that are dormant beneath the incision. The growth hormone (auxin) is redirected to the buds that are typically closest to the cut because it can no longer move up the stem, which causes this to occur.

Usually, if you want your plant to branch, you want it to have at least a few branches, if not more. Pruning above a cluster of leaves will give you the highest chance of getting many branches. Or a cluster of closely spaced leaves.

Where the leaves and stem meet, dormant buds can be found. You should therefore aim for a region of your FLF that contains buds close together if you want to have the best chance of awakening several latent buds. Don’t panic if you can’t see them; sometimes they are tiny and difficult to see. They will be present!

The distance between the “nodes” is another item to watch out for. These locations can also produce buds. On your fiddle leaf fig, nodes—which resemble little rings around the stem—are frequently where the crunchy, browned leaf casings are located.

Within a week or two, you should start to notice buds getting bigger. Nevertheless, depending on the climate, it may take longer and even longer for the new leaves to bloom.

Since you’ll be removing a portion of stem, pruning is best done when the plant is taller than the height you’d like it to branch at. For instance, if you want your FLF to have branches that are around 3 feet high but it is 5 feet tall, you will need to prune the plant to make it only 3 feet tall.

See the section on notching if you don’t want to reduce the height of your plant.

Tips for Pruning:

  • Use a set of cutters that are well-kept and razor-sharp.
  • Make an angle cut in the stem.
  • Remove any sap by using a fresh paper towel.
  • Dormant buds (nodes) are located where a leaf meets the stem; therefore, you should prune just above a leaf. At this point, you might be able to notice a tiny brown (or occasionally green) bump.

Why should I Wiggle my Fiddle leaf fig?

Your indoor tree’s trunk can be moved to simulate wind, which will help you become more resilient outside. You can also leave your tree outside for extended periods of time to strengthen its trunk and expose it to the elements. Once you get the leaves inside, be sure to inspect them for bugs.

What are the best growing conditions for an indoor fiddle leaf fig tree?

Know that your fiddle leaf fig tree prefers moderate temperature changes and place it in a sunny spot within the house. The tree should be planted in a container with well-draining soil that is kept humid but not soggy since this might cause root rot.

Why isn’t my fiddle leaf fig tree flowering?

You should be careful not to overwater your fiddle leaf fig because it is prone to root rot. When storing the fig within a container, make sure the bottom has lots of holes to allow for proper drainage.

How do I fix a leggy fiddle leaf fig tree?

Give a leggy or tilted fiddle leaf fig tree bright, filtered sunshine as treatment. Please place your plant in the area of the house that gets the most indirect sunlight, which is usually six to eight hours per day. Don’t keep it in the Sun for too long, though; doing so could scorch the leaves.

Will wiggling my fiddle leaf fig tree weaken its roots?

Every one to two weeks, wiggle your fiddle leaf fig tree for 1.5 to 2 minutes to significantly thicken the trunk. Beginning with light shaking, progressively build up the force. If your plant is stake-supported, move it about at first with the support in place. You can take the stake out once your fig tree has gotten used to this practice.

Where are fiddle leaves cut for propagation?

Grab a set of clean, well-kept scissors, clippers, or pruners. This is a bypass pruner that I enjoy using.

To lessen the possibility of a disease spreading from plant to plant, wipe the blades with a cotton ball that has been dipped in rubbing alcohol.

Making the cut – angle or straight?

When making a cutting for propagation, instructions on whether to cut straight across or at an angle are occasionally seen. Cutting at an angle results in more surface area being exposed. This has both positive and negative aspects. Here is the lowdown:

It’s harmful because it somewhat raises the possibility that bacteria or fungi will spread disease into the cutting. Therefore, it’s not the cut that commercial producers like since, if a disease took hold, it might spread to a significant portion of their crop.

It’s advantageous because an angled cutting has greater surface area to absorb water and rooting hormone than a straight cut and is therefore more likely to establish more roots.

I advise cutting at an angle as disease is unlikely for those of us who garden at home.

Where and how much to cut from your fiddle leaf fig?

Take 3 nodes from a growing point if you can, cutting just below the third node.

Although three nodes are not required, having three increases your chances of success because there are now three growing points rather of just one.

A lengthier cutting can also be divided into two or more pieces. Although a growing point end is not required, it must have nodes.

Describe a node. wonderful question A leaf or branch along a stem is said to be at a node. The fresh buds will develop here. The internode is the term for the area between.

White milky sap will trickle from the cut. A milky, white latex sap is produced by all members of the Moraceae plant family. Simply avoid eating it and putting it in your eyes as it can irritate you.

Inject rooting hormone into the cutting. The rooting process for your cuttings is accelerated with rooting hormone, resulting in bigger, more developed plants more quickly.

  • Particularly on woody plants like fiddle leaf figs, it is advised. Ficus lyrata is a woody plant that roots readily, although generally speaking, woody plants are far more challenging to root than soft, non-woody (herbaceous) plants.

Before sticking the cutting, completely moisten the soil in your container after adding the propagation mix.

  • This prevents the rooting hormone from being immediately washed off, as may happen if you stuck the cutting and then watered it in. It also stabilizes the soil to better support the cutting.

“Use a pencil or chopstick to make the pilot holes for your cutting. When you insert the cutting, it helps prevent tissue damage and turning off the rooting hormone.

Cut the bottom leaves instead of ripping them off to avoid damaging the cambium tissue, which could allow illness to infiltrate.

The likelihood that the entire cutting may decay increases if leaves are left attached and sitting in the soil.

Cuttings should be inserted into the container at least 1/3 of the way up so that they won’t topple over.

“To stabilize the cutting, tuck the earth around it. Even though I used a huge cutting and compacted the soil, the plant didn’t need a stake because it was moist.