Placing a cutting or a single leaf in water is another traditional way of fiddle leaf fig growth. This technique works well for many individuals, and it’s entertaining because you can watch the rooted develop rather than having to wait for growth or yank on the cutting. In the glass container, they also look lovely.
I’ll admit, though, that it’s not my favored method for growing indoor plants, including fiddle leaf figs.
I prefer to make things as favorable to myself as possible whenever I can. As a result, I find that no commercial growers employ the water approach when deciding how to best propagate.
If you give it any thought, however, it makes sense. Since Ficus lyrata is not an aquatic plant, water propagation will not be the best environment for it to flourish in. But since most who attempt it succeed, it must be able to grow quite well in water.
Use a cutting with roughly 3 nodes, as mentioned above, rather than a single leaf for the greatest outcomes. (For an explanation of why using single leaves is not a wise choice, see below.)
Place the sliced piece in fresh water in a dimly lit area. To keep the oxygen levels stable, change the water every several days.
Here is where I fail with this approach. Normally, I forget. In comparison to an unwatered plant pot that seems dry and feels light as a feather, the water in the glass appears the same.
Because plants require oxygen, soil is a better environment for them than water. While there is some oxygen in water, it fades off the surface when the water is motionless. (A bubbler is required in aquariums in order to maintain the water’s oxygen levels.)
Watch for the roots to form; it took my leaf more than 6 weeks to do so. (Results are shown in the section below.)
Where are fiddle leaf figs cut for propagation?
Taking a leaf or stem cutting is the first step in growing a fiddle leaf fig plant from seed. The cutting will then be “rooted,” which simply means you’ll put it in water or extremely moist soil so it can develop new roots. The steps for propagating your plant are listed below.
Step 1: Prepare Your Propagation Container
- For your cutting, you should have a container filled with fresh water devoid of chlorine.
- Use distilled water or leave regular tap water remain overnight to allow the chlorine dissipate.
- Make sure the container is sturdy enough to hold your cutting and maintain its upright position.
Step 2: Take Your Stem Cutting
I advise cutting a stem with no more than two or three leaves, as any more will require too much energy to flourish.
3 inches or so below the first leaf, make a cut. Your new plant will grow a short stem and an adequate number of leaves as a result. Pick a handful of your plant’s healthiest leaves to use as your cutting. If you cut them, don’t worry; they will grow back. Your cutting should be taken with a clean, sharp tool and dropped into water right away.
Step 3: Use a Rooting Hormone
To help your plant establish new roots more quickly, buy a rooting hormone like Houseplant Propagation Promoter. Before inserting your stem in soil or water, follow the instructions on the bottle and give it a quick dip.
The exclusive mix of Houseplant Propagation Promoter supports excellent growth and photosynthesis while shielding young cuttings from toxins and germs that could kill them off.
Be Patient
In February of 2018, Jackye embarked on a new fiddle leaf fig voyage. As of June, the majority of her new plants had not yet experienced much new development. New cuttings must be let at least four to eight weeks to root before they can begin to generate new leaves, which can take up to six months.
Before they notice the new roots, many growers give up on their cuttings and discard them, abandoning the tiny plants before they have a chance to start sprouting new leaves. But perseverance pays off; all but three of the 61 cuttings she took produced roots.
Expect Variability
By six weeks, the majority of Jackye’s cuttings had begun establishing new roots, but there was considerable variation. Some people got new roots in 3 or 4 weeks, while others needed 8 or 9 weeks. It’s critical to realize that every cutting is unique and that a variety of elements, including hormones, light, season, and time of day, influence the roots process. Prior to giving up on cuttings that haven’t developed roots, give them at least 10 to 12 weeks.
You Can Root Cuttings in Soil or Water
Cuttings of fiddle leaf figs can grow roots in either humid soil or water. The success of your project is unaffected by the growing medium, although there are advantages and disadvantages to each. Some of Jackye’s cuttings were rooted in both water and soil. After weighing both possibilities, she advises burying the roots in soil to avoid crushing the young, delicate roots while transferring them from water to soil. She did, however, like watching the new roots grow in the water.
A Rooting Hormone Is Critical
Use a rooting hormone whether you are rooting your cuttings in soil or water. Your plant receives instructions from the chemical powder to focus its efforts on growing roots rather than new leaves. Your prospects of success are minimal without it. On all of her cuttings, Jackye applied a substance resembling our Houseplant Propagation Promoter.
Soil Cuttings Don’t Need Drainage
For the purpose of being able to observe fresh development in both the soil- and water-rooted cuttings, Jackye rooted her cuttings in clear plastic Solo cups without any drainage holes. She never allowed them to dry out and maintained them uniformly hydrated. She put them into pots with drainage holes once the roots were strong.
Fiddle Leaf Fig Propagation Can Help Your Original Plant Grow
After taking over 60 cuttings from her original eight plants, Jackye was happy to see new growth including new branches on each plant. Cuttings are not harmful to the mother plant when used for propagation, and they may even encourage new development.
Take Cuttings of New Growth if Possible
After a few months, Jackye found that the cuttings she took from the tops of her plants that were actively growing were the ones with the most new growth. For fresh growth, these terminal branches have already been programmed. All eight of the top cuttings she took began to establish roots and new growth in less than four months.
Jackye advises taking a branch or growing tip that is somewhere between six and eighteen inches long. Take off the leaves from the branch’s lower third or so. Place the sliced portion in potting soil after dipping it in rooting hormone. For roughly six weeks, or until you notice new roots, keep it very wet.
You can even divide a lengthy branch into multiple portions when pruning it, making care to leave a few leaves on each section. Fiddle leaf figs are quite powerful and hardy plants; Jackye even tried planting branches without leaves, and they ultimately began to grow again! Just a couple more months were needed.
Will fig cuttings germinate in liquid?
Cuttings of fig can easily take root in water. You only need a cup, some water, and a pair of clean, heavy-duty scissors or pruners. The entire process might take more than a month, but it could take as little as three weeks.
What happens if the top of a fiddle leaf fig is chopped off?
Your fiddle leaf fig probably has no other branches that will allow it to transition from a fiddle leaf shrub to a fiddle leaf tree. In addition, bear the following in mind before proceeding:
The amount of regrowth that results from pruning depends on how severe it was. The reason for this is that the plant is trying to grow again in an effort to balance the root system below with the shoot system above, which is now designed to support the plant at its bigger size before trimming.
Usually, the most active shoot growth takes place 6 to 8 inches after the pruning cut.
Make the cut on your fiddle leaf fig
Make a decision regarding the size of the Ficus lyrata cut. Once more, the branching will be more noticeable the longer a part is clipped. (And the less the plant will grow in height, at least for that shoot.)
Your fiddle leaf fig won’t be encouraged to generate as many lateral branches off of the main trunk if you simply pinch out the fresh buds at the top with your fingers.
If you want to encourage a little lateral development to make your plant appear fuller near the top, pinching is more helpful.
On the other hand, you’ll see a lot more branching if you remove 12 of the top shoots.
Choose the node that you want to cut above. The spots on stems known as nodes are where leaves, buds, or branches can grow. However, not every node has leaves or branches; some nodes may only have a mark and a little thickening of the stem. Internodes are the parts of the stem that lie between the nodes.
3. Make use of a clean pair of pruners. Just above the top of your node, make the cut. Cut just above the node rather than into it, which would harm it.
Any plant in the fig family, including your fiddle leaf fig, will exude an oozing, milky, white sap when cut. Simply avoid eating it, getting it in your eyes, or letting it land on the carpet because it can be annoying.
4. As a final piece of advice, wait to remove leaves from the trunk of your fiddle leaf until the new branches have begun to grow. Your plant should be as robust as possible because those leaves aid in the development of the new lateral buds.
(Are you wondering what to do with the plant pieces you pruned? Why not cultivate a second fiddle leaf fig?
I’m done now! Now, give your new lateral buds, which will eventually grow into branches, a few weeks. While the exact length of time varies on a number of variables, your chances of success are higher if you attempt this in the spring, when fiddle leaves are actively growing, as opposed to the winter, when they are largely dormant. In comparison to winter, when the plant will need more time to heal the cut and form new buds, springtime will see rapid new development.
A fiddle leaf fig can be propagated in water.
The simplest way to reproduce a fiddle leaf fig, in my opinion, is by water! A jar of water and a pair of cutters are required. Use a tiny plant part that is 6 inches or less long for water propagation.
You don’t want the plant to expend energy on maintaining a long stem or numerous leaves while the roots are still developing. To reduce the amount of energy consumed by the plant, which is why you might see some individuals chop leaves in half. You shouldn’t have to bother about trimming additional leaves off if you only have a small section of the plant for replication.
Should I remove my fiddle leaf fig’s bottom leaves?
You should be aware of what those bottom leaves do before selecting when to remove them.
Lower foliage has the same function as that fresh, vibrant growth up top: the leaves work to mix that green chlorophyll, commonly known as “the meat of the leaf,” with sunlight, carbon dioxide, and water to produce sap, the plant’s own sweet food.
So let them alone if you want the trunk, roots, and new growth to continue receiving energy from the sun through the foliar producers and absorbing it.
Another advantage of the lower leaves is that this is typically where the most frequent watering issues show up. To put it another way, many owners of fiddles may detect overwatering and underwatering based on early warning indicators from these bottom leaves. You lose access to one of the plant’s early warning systems if you remove them.
Keep in mind that the lower leaves should be saved for the very last stage of shaping because they AID in giving the tree its characteristic shape.
Once more, deciding whether or not to remove these lower leaves depends on what they do for the plant.
How are fiddle leaf stems multiplied?
To explore if roots could develop from a single leaf, I started with a leaf and four stem cuttings. I placed the other 2 stem cuttings in damp potting soil after placing the bases of 2 stem cuttings and 1 leaf in water.
The cuttings should be kept in a water-filled, clean glass vase in a warm, well-lit area away from the sun. I just changed the water when it was foggy, which only happened a few times. Use tap water that is at room temperature and wait a day for the chlorine to dissipate before using.
On the stem base of the watered-down cuttings, a few tiny popcorn-like spots started to develop after 4 weeks.
Wow, roots are developing in the water after 6–8 weeks! Water replacement is not necessary at this time.
You can place the rooted Fiddle Leaf Fig cuttings in soil and watch them grow once the roots are around 1 to 2 inches long!