Fiddle-leaf figs can be multiplied using a few various techniques, including air layering and stem or leaf cuttings, however it takes some time.
With the former, you can grow new miniature plants for your collection, as gifts, or to make use of the leaves and branches you’ve cut off. When trying to save and repot a fiddle-leaf fig that has experienced leaf drop and all of its growth has gathered at the top of a tall, barren stem, the later procedure is helpful. Here are the steps for each of these alternatives.
How are fiddle leaf trees reproduced?
Placing a cutting or a single leaf in water is another traditional way of fiddle leaf fig growth. This technique works well for many individuals, and it’s entertaining because you can watch the rooted develop rather than having to wait for growth or yank on the cutting. In the glass container, they also look lovely.
I’ll admit, though, that it’s not my favored method for growing indoor plants, including fiddle leaf figs.
I prefer to make things as favorable to myself as possible whenever I can. As a result, I find that no commercial growers employ the water approach when deciding how to best propagate.
If you give it any thought, however, it makes sense. Since Ficus lyrata is not an aquatic plant, water propagation will not be the best environment for it to flourish in. But since most who attempt it succeed, it must be able to grow quite well in water.
Use a cutting with roughly 3 nodes, as mentioned above, rather than a single leaf for the greatest outcomes. (For an explanation of why using single leaves is not a wise choice, see below.)
Place the sliced piece in fresh water in a dimly lit area. To keep the oxygen levels stable, change the water every several days.
Here is where I fail with this approach. Normally, I forget. In comparison to an unwatered plant pot that seems dry and feels light as a feather, the water in the glass appears the same.
Because plants require oxygen, soil is a better environment for them than water. While there is some oxygen in water, it fades off the surface when the water is motionless. (A bubbler is required in aquariums in order to maintain the water’s oxygen levels.)
Watch for the roots to form; it took my leaf more than 6 weeks to do so. (Results are shown in the section below.)
Can a cutting of a fiddle leaf fig be grown?
Taking a stem or leaf cutting from a fiddle leaf fig plant and letting it root in water or soil will result in a new, self-sustaining plant. Most houseplants can be propagated, albeit with different degrees of difficulty. In reality, fiddle leaf figs are rather simple to grow.
Be Patient
In February of 2018, Jackye embarked on a new fiddle leaf fig voyage. As of June, the majority of her new plants had not yet experienced much new development. New cuttings must be let at least four to eight weeks to root before they can begin to generate new leaves, which can take up to six months.
Before they notice the new roots, many growers give up on their cuttings and discard them, abandoning the tiny plants before they have a chance to start sprouting new leaves. But perseverance pays off; all but three of the 61 cuttings she took produced roots.
Expect Variability
By six weeks, the majority of Jackye’s cuttings had begun establishing new roots, but there was considerable variation. Some people got new roots in 3 or 4 weeks, while others needed 8 or 9 weeks. It’s critical to realize that every cutting is unique and that a variety of elements, including hormones, light, season, and time of day, influence the roots process. Prior to giving up on cuttings that haven’t developed roots, give them at least 10 to 12 weeks.
You Can Root Cuttings in Soil or Water
Cuttings of fiddle leaf figs can grow roots in either humid soil or water. The success of your project is unaffected by the growing medium, although there are advantages and disadvantages to each. Some of Jackye’s cuttings were rooted in both water and soil. After weighing both possibilities, she advises burying the roots in soil to avoid crushing the young, delicate roots while transferring them from water to soil. She did, however, like watching the new roots grow in the water.
A Rooting Hormone Is Critical
Use a rooting hormone whether you are rooting your cuttings in soil or water. Your plant receives instructions from the chemical powder to focus its efforts on growing roots rather than new leaves. Your prospects of success are minimal without it. On all of her cuttings, Jackye applied a substance resembling our Houseplant Propagation Promoter.
Soil Cuttings Don’t Need Drainage
For the purpose of being able to observe fresh development in both the soil- and water-rooted cuttings, Jackye rooted her cuttings in clear plastic Solo cups without any drainage holes. She never allowed them to dry out and maintained them uniformly hydrated. She put them into pots with drainage holes once the roots were strong.
Fiddle Leaf Fig Propagation Can Help Your Original Plant Grow
Jackye was pleased to observe new growth, including additional branches on each plant, after taking more than 60 cuttings from her original eight plants. Cuttings are not harmful to the mother plant when used for propagation, and they may even encourage new development.
Take Cuttings of New Growth if Possible
After a few months, Jackye found that the cuttings she took from the tops of her plants that were actively growing were the ones with the most new growth. For fresh growth, these terminal branches have already been programmed. All eight of the top cuttings she took began to establish roots and new growth in less than four months.
Jackye advises taking a branch or growing tip that is somewhere between six and eighteen inches long. Take off the leaves from the branch’s lower third or so. Place the sliced portion in potting soil after dipping it in rooting hormone. For roughly six weeks, or until you notice new roots, keep it very wet.
You can even divide a lengthy branch into multiple portions when pruning it, making care to leave a few leaves on each section. Fiddle leaf figs are quite powerful and hardy plants; Jackye even tried planting branches without leaves, and they ultimately began to grow again! Just a couple more months were needed.
Will fig cuttings germinate in liquid?
Cuttings of fig can easily take root in water. You only need a cup, some water, and a pair of clean, heavy-duty scissors or pruners. The entire process might take more than a month, but it could take as little as three weeks.
What happens if the top of a fiddle leaf fig is chopped off?
Your fiddle leaf fig probably has no other branches that will allow it to transition from a fiddle leaf shrub to a fiddle leaf tree. In addition, bear the following in mind before proceeding:
The amount of regrowth that results from pruning depends on how severe it was. The reason for this is that the plant is trying to grow again in an effort to balance the root system below with the shoot system above, which is now designed to support the plant at its bigger size before trimming.
Usually, the most active shoot growth takes place 6 to 8 inches after the pruning cut.
Make the cut on your fiddle leaf fig
Make a decision regarding the size of the Ficus lyrata cut. Once more, the branching will be more noticeable the longer a part is clipped. (And the less the plant will grow in height, at least for that shoot.)
Your fiddle leaf fig won’t be encouraged to generate as many lateral branches off of the main trunk if you simply pinch out the fresh buds at the top with your fingers.
If you want to encourage a little lateral development to make your plant appear fuller near the top, pinching is more helpful.
On the other hand, you’ll see a lot more branching if you remove 12 of the top shoots.
Choose the node that you want to cut above. The spots on stems known as nodes are where leaves, buds, or branches can grow. However, not every node has leaves or branches; some nodes may only have a mark and a little thickening of the stem. Internodes are the parts of the stem that lie between the nodes.
3. Make use of a clean pair of pruners. Just above the top of your node, make the cut. Cut just above the node rather than into it, which would harm it.
Any plant in the fig family, including your fiddle leaf fig, will exude an oozing, milky, white sap when cut. Simply avoid eating it, getting it in your eyes, or letting it land on the carpet because it can be annoying.
4. As a final piece of advice, wait to remove leaves from the trunk of your fiddle leaf until the new branches have begun to grow. Your plant should be as robust as possible because those leaves aid in the development of the new lateral buds.
(Are you wondering what to do with the plant pieces you pruned? Why not cultivate a second fiddle leaf fig?
I’m done now! Now, give your new lateral buds, which will eventually grow into branches, a few weeks. While the exact length of time varies on a number of variables, your chances of success are higher if you attempt this in the spring, when fiddle leaves are actively growing, as opposed to the winter, when they are largely dormant. In comparison to winter, when the plant will need more time to heal the cut and form new buds, springtime will see rapid new development.
How can a fig tree from a cutting be started?
A fig tree can be started from fig cuttings in one of three ways, each of which is a straightforward process. You can root figs using any of these easy, uncomplicated methods; your choice will likely depend on the local weather conditions during the dormant season.
Layering for Fig Propagation
Temperatures that never drop below freezing during the dormant season are necessary for the first way of propagating fig trees outside. By burying a low-growing branch part with 6 to 8 inches (15-20 cm) of the tip exposed above ground and allowing the buried portion to root before removing it from the parent tree, figs can be rooted. Although it is the most straightforward form of fig propagation, it can be challenging to maintain the ground as the branches root.
Rooting Fig Cuttings Outdoors
Fig cuttings are an increasingly common way to root figs outside. Take fig cuttings from young, two- to three-year-old tiny branches late in the dormant season, after the threat of frost has passed. They should be around the breadth of your pinky, 1/2 to 3/4 inch (1.3 to 1.9 cm) thick, and 8 to 12 inches (20 to 30 cm) long. The tip should be cut on a slant and the bottom end should be flat. Apply a sealant to the disease-prone slanted end and rooting hormone to the disease-resistant flat end.
It’s preferable to use six to eight shoots when learning how to start a fig tree using this method to account for some failures. There are always several triumphs to give away!
Place the flat end of the rooted fig into a hole that is approximately a foot (30 cm) apart and 6 inches (15 cm) deep. Water thoroughly but not excessively. Your fig cuttings can develop 36 to 48 inches in length in a year (91-122 cm.). The next dormant season, the new trees will be prepared for transplant.
Rooting Figs Indoors
How to start a fig tree inside is the third method of fig propagation. If your spring weather is unpredictable, this strategy is helpful for getting started early. Use the aforementioned procedure to take fig cuttings. Newspaper should line the bottom of a 6-inch (15-cm) pot before 2 inches (5 cm) of sand or potting soil are added. Four of your treated cuttings should be placed upright in the pot, with dirt being added around them. Place a 2-liter container with the bottom cut off over the cuttings after thoroughly watering the plant.
Keep the fig cuttings warm and in a window with good light—but not direct sunlight. Water only when the soil is really dry. When you notice fresh growth, wait a week before taking down the temporary greenhouse.
If the weather permits, plant your rooted fig cuttings outside or in larger pots once you notice significant growth. For the remainder of the summer, keep the transplants moist and observe their development.
As you can see, propagating fig trees is a straightforward operation that, when carried out correctly, can be both enjoyable and cost-effective. Cheers to that!
Where should a fiddle leaf fig be cut?
As I indicated earlier, many growers like to cultivate a traditional tree shape, complete with a distinct canopy and trunk. However, F. lyrata tends to grow in a columnar or bushy shape when kept as a houseplant.
In the wild, F. lyrata does this on its own by losing its lower leaves and growing into its original shape as a banyan tree.
like the renowned “Wild F. lyrata and ordinary banyan, F. benghalensis, both start out their lives as epiphytes. When a seed falls into another tree’s canopy, it germinates, develops, and eventually strangles its host plant as it descends to the ground.
Your houseplant won’t do this, of course, but the tree shape is attractive. How can a rambunctious F. lyrata be transformed into a tall, graceful specimen?
First off, if you’ve recently acquired a highly sought-after fiddle-leaf, hold off on starting to prune it into a tree shape.
Whatever two-thirds of the intended height means to you within the boundaries of your space, let it grow to that point. The trunk might become strong and thick as a result.
It’s advisable to top the tree out at least eight to ten inches away from the ceiling if you want it to grow tall.
This not only improves the appearance but also prevents the top leaves from bending and slamming against your ceiling.
Say, for instance, that you want to top your tree off at about seven or eight feet and that your home has nine-foot ceilings. You shouldn’t begin trimming for lateral growth until the trunk is at least five feet tall based on these measurements.
Wait until spring or summer when the plant is actively growing before pruning your fiddle-leaf fig to generate a tree form with branching lateral growth. Then, make a cut at least six inches down from the tip of the tree.
You can preserve and grow this cutting! Cut in an internodal space, if possible.
Don’t remove the leaves that are below the cut. So that the plant can photosynthesize and generate energy to grow those lateral branches, you want them to stay.
Within a few weeks, your F. lyrata will start to branch from the cut. Although this tree occasionally produces just one branch, it frequently produces two or three additional lateral branches.
You can remove one or two leaves from the tree’s base once the new branches have developed leaves.
The hue of the leaves and emerging branches will deepen as the canopy ages. Feel free to remove one or two more leaves from the bottom part of the trunk once you become aware of this.
You can continue to prune leaves away from the tree’s trunk as the canopy grows over time. You’ll eventually grow a tidy trunk that supports a Y-shaped canopy.
Note: Some knowledgeable gardeners enjoy using a technique called “creating lateral branches by notching. Using this technique, the gardener carefully cuts through two nodes. This cut is supposed to encourage the tree to generate lateral branches without losing height.
Because of the fast growth of F. lyrata and the fact that we are confident that pruning for lateral branch growth yields reliable results, we advise using this technique to produce that attractive canopy.
After pruning, give your plant the best care possible by providing it with the right amount of water, fertilizer, and light, which will hasten the healing of its wounds.