Placing a cutting or a single leaf in water is another traditional way of fiddle leaf fig growth. This technique works well for many individuals, and it’s entertaining because you can watch the rooted develop rather than having to wait for growth or yank on the cutting. In the glass container, they also look lovely.
I’ll admit, though, that it’s not my favored method for growing indoor plants, including fiddle leaf figs.
I prefer to make things as favorable to myself as possible whenever I can. As a result, I find that no commercial growers employ the water approach when deciding how to best propagate.
If you give it any thought, however, it makes sense. Since Ficus lyrata is not an aquatic plant, water propagation will not be the best environment for it to flourish in. But since most who attempt it succeed, it must be able to grow quite well in water.
Use a cutting with roughly 3 nodes, as mentioned above, rather than a single leaf for the greatest outcomes. (For an explanation of why using single leaves is not a wise choice, see below.)
Place the sliced piece in fresh water in a dimly lit area. To keep the oxygen levels stable, change the water every several days.
Here is where I fail with this approach. Normally, I forget. In comparison to an unwatered plant pot that seems dry and feels light as a feather, the water in the glass appears the same.
Because plants require oxygen, soil is a better environment for them than water. While there is some oxygen in water, it fades off the surface when the water is motionless. (A bubbler is required in aquariums in order to maintain the water’s oxygen levels.)
Watch for the roots to form; it took my leaf more than 6 weeks to do so. (Results are shown in the section below.)
How is a fiddle leaf fig cutting rooted?
To explore if roots could develop from a single leaf, I started with a leaf and four stem cuttings. I placed the other 2 stem cuttings in damp potting soil after placing the bases of 2 stem cuttings and 1 leaf in water.
The cuttings should be kept in a water-filled, clean glass vase in a warm, well-lit area away from the sun. I just changed the water when it was foggy, which only happened a few times. Use tap water that is at room temperature and wait a day for the chlorine to dissipate before using.
On the stem base of the watered-down cuttings, a few tiny popcorn-like spots started to develop after 4 weeks.
Wow, roots are developing in the water after 6–8 weeks! Water replacement is not necessary at this time.
You can place the rooted Fiddle Leaf Fig cuttings in soil and watch them grow once the roots are around 1 to 2 inches long!
How long does it take for fiddle leaf fig cuttings to take root?
Keep an eye on your rooting system every few days to make sure it has enough water and light by placing it in a well-lit area away from direct sunlight. If the water appears cloudy or muddy, replace it with fresh, chlorine-free water at room temperature.
Step 5: Wait One Month
Your cutting’s roots typically take a month to mature. After around three weeks, you can see the roots growing at the base of the plant. Up to the point that you’re ready to replant, let them grow for another week or so.
Step 6: Plant Your New Rooted Cutting
For the first two months of growth, plant your newly rooted cutting in moist potting soil and be sure to keep it consistently moist to allow the roots to take hold.
Will fig cuttings germinate in liquid?
Cuttings of fig can easily take root in water. You only need a cup, some water, and a pair of clean, heavy-duty scissors or pruners. The entire process might take more than a month, but it could take as little as three weeks.
How can a fig tree from a cutting be started?
A fig tree can be started from fig cuttings in one of three ways, each of which is a straightforward process. You can root figs using any of these easy, uncomplicated methods; your choice will likely depend on the local weather conditions during the dormant season.
Layering for Fig Propagation
Temperatures that never drop below freezing during the dormant season are necessary for the first way of propagating fig trees outside. By burying a low-growing branch part with 6 to 8 inches (15-20 cm) of the tip exposed above ground and allowing the buried portion to root before removing it from the parent tree, figs can be rooted. Although it is the most straightforward form of fig propagation, it can be challenging to maintain the ground as the branches root.
Rooting Fig Cuttings Outdoors
Fig cuttings are an increasingly common way to root figs outside. Take fig cuttings from young, two- to three-year-old tiny branches late in the dormant season, after the threat of frost has passed. They should be around the breadth of your pinky, 1/2 to 3/4 inch (1.3 to 1.9 cm) thick, and 8 to 12 inches (20 to 30 cm) long. The tip should be cut on a slant and the bottom end should be flat. Apply a sealant to the disease-prone slanted end and rooting hormone to the disease-resistant flat end.
It’s preferable to use six to eight shoots when learning how to start a fig tree using this method to account for some failures. There are always several triumphs to give away!
Place the flat end of the rooted fig into a hole that is approximately a foot (30 cm) apart and 6 inches (15 cm) deep. Water thoroughly but not excessively. Your fig cuttings can develop 36 to 48 inches in length in a year (91-122 cm.). The next dormant season, the new trees will be prepared for transplant.
Rooting Figs Indoors
How to start a fig tree inside is the third method of fig propagation. If your spring weather is unpredictable, this strategy is helpful for getting started early. Use the aforementioned procedure to take fig cuttings. Newspaper should line the bottom of a 6-inch (15-cm) pot before 2 inches (5 cm) of sand or potting soil are added. Four of your treated cuttings should be placed upright in the pot, with dirt being added around them. Place a 2-liter container with the bottom cut off over the cuttings after thoroughly watering the plant.
Keep the fig cuttings warm and in a window with good light—but not direct sunlight. Water only when the soil is really dry. When you notice fresh growth, wait a week before taking down the temporary greenhouse.
If the weather permits, plant your rooted fig cuttings outside or in larger pots once you notice significant growth. For the remainder of the summer, keep the transplants moist and observe their development.
As you can see, propagating fig trees is a straightforward operation that, when carried out correctly, can be both enjoyable and cost-effective. Cheers to that!
What happens if the top of a fiddle leaf fig is chopped off?
Your fiddle leaf fig probably has no other branches that will allow it to transition from a fiddle leaf shrub to a fiddle leaf tree. In addition, bear the following in mind before proceeding:
The amount of regrowth that results from pruning depends on how severe it was. The reason for this is that the plant is trying to grow again in an effort to balance the root system below with the shoot system above, which is now designed to support the plant at its bigger size before trimming.
Usually, the most active shoot growth takes place 6 to 8 inches after the pruning cut.
Make the cut on your fiddle leaf fig
Make a decision regarding the size of the Ficus lyrata cut. Once more, the branching will be more noticeable the longer a part is clipped. (And the less the plant will grow in height, at least for that shoot.)
Your fiddle leaf fig won’t be encouraged to generate as many lateral branches off of the main trunk if you simply pinch out the fresh buds at the top with your fingers.
If you want to encourage a little lateral development to make your plant appear fuller near the top, pinching is more helpful.
On the other hand, you’ll see a lot more branching if you remove 12 of the top shoots.
Choose the node that you want to cut above. The spots on stems known as nodes are where leaves, buds, or branches can grow. However, not every node has leaves or branches; some nodes may only have a mark and a little thickening of the stem. Internodes are the parts of the stem that lie between the nodes.
3. Make use of a clean pair of pruners. Just above the top of your node, make the cut. Cut just above the node rather than into it, which would harm it.
Any plant in the fig family, including your fiddle leaf fig, will exude an oozing, milky, white sap when cut. Simply avoid eating it, getting it in your eyes, or letting it land on the carpet because it can be annoying.
4. As a final piece of advice, wait to remove leaves from the trunk of your fiddle leaf until the new branches have begun to grow. Your plant should be as robust as possible because those leaves aid in the development of the new lateral buds.
(Are you wondering what to do with the plant pieces you pruned? Why not cultivate a second fiddle leaf fig?
I’m done now! Now, give your new lateral buds, which will eventually grow into branches, a few weeks. While the exact length of time varies on a number of variables, your chances of success are higher if you attempt this in the spring, when fiddle leaves are actively growing, as opposed to the winter, when they are largely dormant. In comparison to winter, when the plant will need more time to heal the cut and form new buds, springtime will see rapid new development.
Should I remove my fiddle leaf fig’s bottom leaves?
You should be aware of what those bottom leaves do before selecting when to remove them.
Lower foliage has the same function as that fresh, vibrant growth up top: the leaves work to mix that green chlorophyll, commonly known as “the meat of the leaf,” with sunlight, carbon dioxide, and water to produce sap, the plant’s own sweet food.
So let them alone if you want the trunk, roots, and new growth to continue receiving energy from the sun through the foliar producers and absorbing it.
Another advantage of the lower leaves is that this is typically where the most frequent watering issues show up. To put it another way, many owners of fiddles may detect overwatering and underwatering based on early warning indicators from these bottom leaves. You lose access to one of the plant’s early warning systems if you remove them.
Keep in mind that the lower leaves should be saved for the very last stage of shaping because they AID in giving the tree its characteristic shape.
Once more, deciding whether or not to remove these lower leaves depends on what they do for the plant.