How To Grow Dracena Marginata From Cuttings

Dracaena cuttings can be taken from the top or through stem cuttings, respectively. The method of dracaena plant propagation choice is just a matter of preference for the grower because both methods of generating new dracaena plants will take root swiftly.

Top Cuttings

The first choice is to collect top cuttings, which are produced when the plant’s top is cut off. Although entirely removing the top of the parent plant may seem scary, growth should rapidly return from the clipped growth nodes.

Make a cut below the plant’s leaf line, being sure to incorporate many of the stem’s nodes. Cuttings can be inserted into a vase filled with fresh water or into a container filled with damp soil for planting. The amount of time it takes for roots to form on cuttings propagated in water is short. Put the plants in a pot once their roots start to form.

Stem Cuttings

One of the most popular methods of plant propagation is stem cuttings. This method of growing new dracaena is ideal for gardeners who want to grow several plant clones at once. This technique might appear extreme to novice plant propagators, but rest assured that growth will restart as long as at least half the plant stem is preserved.

Repeat the top cutting procedure to obtain stem cuttings from dracaena. However, you will just remove a greater piece of the stem, rather than going back past one to two leaf nodes. Take great notice of which end is the top and bottom as you cut the plant’s stem into 8-inch (20-cm) sections.

As instructed by the top cutting procedure, plant the cutting segments in the ground or in water. Put the containers in a room that is warm and gets some indirect sunshine. Note: If desired, you may supplement the cuttings with rooting hormone.

Can a Dracena be rooted in water?

I can send your cuttings to any of two locations. But first, you need to soak the bottom of each cutting and dip it in the rooting hormone solution if you’re using one. Any extra should be tapped back into the bottle.

Some gardeners advise against doing this; they suggest taking a small bit out of the bottle for each project and discarding any extra; nonetheless, I do this and haven’t encountered any problems.

After being dipped, I like to stick the cutting directly into the ground. You’re done when you firm the earth with your fingers so the cutting stands straight.

So that the cutting won’t collapse over, you want to press enough of its stem into the earth. In order to prevent the cutting from collapsing or leaning, firmly push the earth around its base. You can manipulate the plant’s orientation to force it to grow vertically.

I prefer to leave a thin layer of dirt between the cutting’s base and the base of the container it will be placed in. About a half-inch will do. This plant doesn’t require a lot of fertilizer at all, therefore a light layer of compost on the soil’s surface is sufficient.

Your dracaena cuttings can also be rooted in water. The cutting is simply placed into a pot without drainage holes and left for a few weeks while roots form.

It would be preferable, in my opinion, to wait until your cutting’s roots are approximately an inch long before repotting them in a new container. If you choose this course of action, hormone powder is not necessary.

In all honesty, you could leave the dracaena in its aquatic habitat forever. Once or twice a week, replace the water, and you’re done. I think donezo is a fantastic term. I don’t believe I came up with the phrase, but I sure do use it that way.

However, if you determine that the best way to propagate dracaena is to let your cuttings grow in soil, wait until you can see the roots forming before potting it in the manner stated above.

Tend Your Cuttings

Keep your dracaena cuttings in an area that is well-lit, but try to keep them out of direct sunlight to prevent sunburn.

Depending on the conditions the plants are in and how moist your growing media was, you won’t need to water the cuttings for around a week.

Keep in mind that all you really have here is a stick in a cup of dirt. If you continue to water it, the growing medium will get saturated and, to put it another way, nasty, and your dracaena will decompose into a foul-smelling ball of goo.

Never water your dracaena cuttings before they actually need it; nobody wants that.

I always pick up the container a plant is growing in to determine how much water it requires. Is there any weight to it? If you said “yes,” your plant most likely doesn’t need water.

But if the weight seems like cotton candy instead of earth, your plant needs a drink of water. I gradually add more, take a ten-minute break, and then give it another sip.

This is my incredibly scientific technique for giving the soil enough time to absorb the first sip while also wetting its whistle for the subsequent one.

Your dracaena propagation effort is now practically complete; you only need to wait a few weeks to a few months for the results. Well done!

How long may cuttings be kept in water?

Before the cuttings are completely rooted, make sure to add new water as necessary. Most plants will begin to root in 3–4 weeks, but others can take longer. The cutting is prepared for potting when the roots are at least 1-2 inches long.

Can a dragon tree be grown from a cutting?

Dragon Trees (Dracaena) are very simple to grow from seed. It doesn’t actually take a plant that is really mature to propagate one because everything is done with top or stem cuttings.

Dragon trees are quite simple to grow and are frequently referred to by its Latin name, Dracaena. To propagate a plant, you don’t actually need a mature one because top or stem cuttings work just as well. In the spring and summer, they develop rather quickly, so you won’t have to wait very long for fresh growth. Because there are few stages and a high success rate, they are also a fantastic plant for beginners in propagation.

Why propagate a Dragon Tree?

First of all, they don’t always develop the way we want them to. They occasionally have a tendency to grow vertically, too leggy, and extremely tall. Maintaining your plant’s proper size for the area can be achieved through propagation.

You can decide to divide your dragon tree into new plants if you see any issues beginning to arise with any portion of the plant. The health of your plant might be impacted by overwatering, sunburn, etc. You may decide to reproduce the portion of the plant that is still healthy if your attempts to revive the plant have failed. It’s a fantastic strategy to keep the plant, at least in part, alive.

Last but not least, receiving free plants is our favorite reason! A fantastic approach to increase the quantity of greenery in your home without actually buying extra plants is through propagation. If you already have too many houseplants, cuttings also make wonderful gifts for friends and family, so there are an almost unlimited number of reasons why you might want to propagate one…

What methods can I use to propagate my Dragon Tree?

A Dragon Tree can only be multiplied in one of two ways: by top cuttings or stem cuttings. Although chopping off the plant’s top may appear fairly intimidating, it is the only practical technique to reproduce your plant.

How many cuttings you get from each procedure makes a big difference. While larger stem cuttings can produce numerous new plants, tip cuttings will only produce one new plant. You may find a step-by-step explanation of each technique below.


If you’re unsure of how much water to give this plant, err on the side of caution because you don’t want to overwater it.

Allowing the top inch or two of soil to dry out in between waterings is a reasonable rule of thumb. You’re probably overwatering it if the leaves begin to droop.

One additional thing: if your local municipal water contains fluoride, let it sit overnight before watering your plants or use distilled water because these plants don’t like fluoride. Your dracaena can be suffering from fluoride toxicity if you see brown leaves or dead regions.


Although these plants are quite tolerant, they don’t appreciate temperatures below 60 °F. You should be alright if you keep it away from drafty windows and air conditioner vents.


During the growing season, use a reliable 10-10-10 fertilizer and apply it every two weeks (spring and fall).

Or, as I do, you may just add Indoor Plant Food each time you water. With the exception of the succulents, I can use it on all of my plants, which is why I enjoy it because I don’t have to keep track of a fertilization schedule. This makes plant care simple and removes all the guesswork from fertilizing!

Pretty easy! If you already take care of succulents or a snake plant and want to expand your collection of low-maintenance plants, this is a fantastic next step.

Can dracaena stem regenerate?

There are two different approaches you might take to cutting, but there are certain considerations for each. You’ll need to use garden shears or a sharp, clean knife. Dull blades take more force to cut, which increases their risk of slipping and injuring someone as well as their chance of crushing the dracaena’s stem as opposed to cutting through it cleanly.

The first approach entails completely beheading your dracaena. Yes, it may seem a little severe, but as long as you continue to take care of the parent dracaena, it will come back from the stem. Include a few growth nodes in the cut and make it underneath the already-grown leaves. These are the tiny protuberances on the stem’s sides where fresh leaves and roots sprout. Nodes at the bottom will develop roots, whilst nodes at the top will develop leaves. Including a handful of these will encourage your cutting to continue growing.

After using the first approach, you can propagate your dracaena using the second method. Cut stems are used in this technique. You can cut extra stem segments once you’ve taken off the plant’s top. These cuttings can be any length, but for the greatest results, they should be at least 8 inches long and have two growth nodes. In order for the original plant to continue to grow, make sure to leave at least 8 inches and two growth nodes on it.

How much time does a dracaena take to root?

The cut end of each cane should be coated with a rooting hormone to hasten the process. Dracaena cuttings grow roots with little preparation. The potting soil should be moistened until it is equally saturated before planting. Each cutting of a dracaena is put into the ground approximately half an inch deep. The bottom of the cane, typically below the bud, is where the roots begin to grow. The cutting may take up to four weeks to start growing roots. When the cutting starts putting on new growth, rooting has taken place.

How can you hasten dracaena’s growth?

Indoors, grow dracaena in direct light that is bright. However, if you transfer plants to more sunny spots, you’ll see enhanced growth. The majority of types can survive pretty low light levels. However, avoid placing them directly in the path of the sun as this could cause the leaves to burn. Although dracaena plants are ideally adapted to indoor and outdoor environments, they occasionally experience humidity issues. Place pots on trays with pebbles and water or mist leaves with water every few days if you know your home is particularly dry or if leaf tips start to turn brown. (To prevent the plant from absorbing too much water, make sure the water level is below the bottom edge of the pot.) The humidity in the area will rise when the water evaporation occurs.

Can cuttings be planted directly in the ground?

As long as you have properly prepared the cuttings, you can place them directly into the soil. According to Chick-Seward, “cut under a node at the bottom and above a node at the top.”

Remember that the soil must be able to drain well; as a result, if your garden soil is heavy clay, for instance, you will need to make a suitable potting mix. Fill tiny pots with one part compost to two parts grit with compost, advises Raven.

Is it preferable to root in soil or water?

Even if you already know how to root a plant in water, David Clark, a professional gardener, has some excellent advice that will help you make the procedure more effective.

He offers advice on two simple plant-starting techniques that you might not have known about.

Two practical workshops on plant propagation were recently presented by Clark at the Buffalo and Erie County Botanical Gardens.

He provided a plethora of knowledge, including these five excellent suggestions:

1. Build a miniature greenhouse. How frequently have you purchased comforters or bedding that was packaged in a plastic zipper bag? I frequently do so, and I usually consider, “This bag ought to be useful for something.

According to Clark, these bags make excellent miniature greenhouses for newly transplanted or rooted plants. Simply place the plant inside the bag and partially zip it up. This will assist in retaining moisture. In addition, a small aperture permits airflow to stop the development of mold.

“Because the plant needs to be confined, unless you have a greenhouse, Clark explained, I almost always root with a bag.

The bedding bags, as shown in the picture at the top of the article, can hold either a sizable plant or a number of smaller plants.

2. Use powders for rooting. By soaking a plant cutting in water, you can multiply plants in one of the easiest ways possible. Trim the stem horizontally above a node (see photo above). Soft, fleshy plants like the Wandering Jew, ivy, arrowhead plant, and spider plant respond nicely to this technique.

Using rooting products will boost your chances of success, according to Clark. There are numerous commercial goods available. These products contain a growth hormone to hasten the emergence of roots and destroy bacteria and fungi to stop the stem from decaying.

Dip your stem into the powder after dispensing a tiny bit of it. (Avoid inserting the stem into the product container directly.) Give the stem a minute to settle. The powder will be absorbed by the plant. Put the cutting’s tip in water; the water won’t completely wash the powder away.

He added that you can also utilize common home items to speed up roots. Cinnamon can be used to eliminate fungus and bacteria on plant stems. Make a rooting solution by dissolving one aspirin in water to encourage the formation of roots.

3. Give your new plant enough time to adjust to soil after being in water. According to Clark, if you root your cutting in water, it will grow roots that are best adapted to obtain its nutrients from water as opposed to soil. The plant could become stressed if it is transferred from water to soil right away.

As an alternative, mix a little dirt into the water you’re using to root your cutting. Do this gradually over the course of four or five weeks to allow your plant adjust to its new growing environment.

4. Learn about leaf section division. You may grow new plants from the leaves of succulents like the sansevieria pictured above. It’s not even necessary to utilize the full leaf; only a portion will do!

When you cut the leaf, Clark advised, be sure to mark which portion is the top and which is the bottom. As shown in the leftmost photo below, place the bottom portion of the leaf segment into a tray of moist perlite. (Fun fact: Perlite is a byproduct of volcanoes.)

5. Encourage plant runners as a means of division.

View the image of the Wandering Jew that is located close to the beginning of this article. Burying the stem horizontally is another approach to multiply such a plant. These nodes will produce new plants.

Do you regret skipping these workshops? On our Events page, you can see all the fascinating classes and events that will be taking place nearby Buffalo.