Pruning houseplants is best done in the spring and summer. They go into hibernation mode from mid-fall through mid-winter.
Pruning
Check to see if your pruners are clean and sharp. You want the cut to be as accurate as possible, and you don’t want the plant or the cuttings to become infected.
Don’t be scared to prune your marginata; it will benefit them in the long run. Especially if they’re crashing through the roof!
The canes on the mother plant that you pruned can be recut. That’s something you’ll notice at the finish of the video.
If the pruning encourages dense growth on the canes you pruned, thin them out. The heads are simple to remove.
Cuttings
Cuttings are always taken at an angle for me. That’s how I was taught, and it reduces the risk of infection.
As quickly as possible, immerse the cuts in water. I propagate a lot of succulents, which need to be healed first, but not with houseplants.
You may easily root the canes you chop off in water. You have the option of replanting them at the mother plant’s base or giving them away. Your pals will adore you!
Can I cut the top off my Dracaena plant?
My plant (I’m not sure what it’s called; I believe it’s a palm tree) is approaching my 10 vaulted ceiling, but it’s bending and weak. I attached it to the wall with string and thumbtacks to help stabilize it. Should I remove the top? Is it okay to chop if it’s top heavy? The bark, or trunks, are quite thin. Is there any way to make them thicker? While looking at the photographs, please let me know if you have any suggestions on this plant.
You have a colossal Dracaena on your hands. Yes, it needs to be trimmed in order to stay healthy within your home.
I altered your photo to show where you can place the top of your plant. A red box outlining part of the Dracaena stem may be seen in the image to the right. You can cut the plant’s top off anywhere along this stalk. Make sure the stem is cut at a 45-degree angle. This will ensure that the plant heals properly and dieback is minimal. I prefer to spray the cut area for a few days to let it dry out gradually. Once a day, mist it with lukewarm water.
You can start a new plant with the portion you cut off. You’ll need some rooting hormone for this. After cutting the top off, soak the cut end in rooting hormone and place it in a damp soil pot. The bit you cut off will grow roots in a few weeks, giving you a new plant.
The old plant will almost certainly sprout new growth on the side of the stem where you cut it. Good luck, and do let me know how it turns out.
Can I cut back a Dracaena?
Dracaena is a genus of roughly 40 plants with characteristic, strappy leaves that are flexible and easy to grow. Despite the fact that dracaena can be grown outside in USDA plant hardiness zones 10 and 11, it is more commonly grown as a houseplant.
Depending on the cultivar, dracaena can grow to be up to 10 feet (3 meters) tall or even higher, necessitating dracaena trimming on a regular basis. The good news is that dracaena plants are simple to prune. These hardy plants don’t mind being pruned, and you can cut dracaenas back to any height you like.
Potential Cause 1: Inconsistent Watering
If your dracaena has brown tips and blotches, it’s most likely due to inconsistency in watering. The tops of the leaves will develop dark tips and patches if the soil dries out too much.
How to fix it:
When the top 75 percent of the soil in the pot feels dry to the touch, water your Dracaena. Check your plants every seven to ten days, and keep in mind that our houses are typically hot and dry in the winter, so plants may require more frequent watering.
Potential Cause 2: Water Sensitivity
Brown stains on the tips and margins of leaves could indicate a build-up of salts in the soil or a build-up of chlorine and/or fluoride in the tap water.
Fill a jar halfway with tap water and set it aside for at least 24 hours, uncovered, to allow the chlorine and fluoride to evaporate. Instead of tap water, you might use rainwater or distilled water.
Excess salts are also indicated by an accumulation of white deposits on the outside of the pot (particularly around the drainage holes). To flush away excess salt, use rainfall or distilled water.
Potential Cause 3: Leaf Spot Disease
Your plant may have Leaf Spot Disease if you notice little brown dots trimmed in yellow. Where the attacking fungus or bacteria feeds on the leaves, it leaves little brown dots trimmed in yellow. The form, color, and size of these patches may vary.
Remove the infected leaves as soon as possible, and keep your Dracaena separate from the rest of your plants for the time being. To cure Leaf Spot Disease, mix a tablespoon or two of baking soda with a teaspoon or two of mineral oil in a spray bottle filled with water. Spray all sections of the plant that are affected with brown spots after thoroughly shaking the solution.
Plant Mom Note:
I always recommend removing the damaged section of a leaf, or the entire leaf if it is completely brown. The removal of dead leaves or damaged areas aids the plant’s recovery and appearance. You’ll need pruning shears or really sharp scissors.
Instructions for proper removal of damaged or dead leaves:
1. Using clean shears, remove any brown leaf tips or spots. To avoid damaging the remaining good foliage on the plant, merely cut off the damaged tips or patches, leaving a little margin of brown.
2. Remove individual leaves at their base if the entire leaf has become brown. Pull the leaf gently to see whether it will fall off on its own. Snip through the stem with clean shears if the leaf does not separate with moderate pushing.
How do you prune a Dracaena root?
Simple root trimming is tolerated by the majority of plants. Root cutting should be done on the thread roots rather than the tap roots. Tap roots will be the larger roots, while thread roots will be the smaller roots that sprout from the tap roots. Simply cut the tap roots apart from the plant, taking no more than one-third of the thread roots in the process. During this process, you should not shorten the tap roots at all, but trimming the thread roots with clippers is acceptable. Also, dead roots that are facing away should be pruned.
Root pruning is just repotting a plant that has been stunted. You don’t want a large clump of roots in the pot because this means the plant won’t get enough nutrition from the dirt. This is due to the fact that the pot will hold less soil. Root cutting makes the plant smaller, allowing it to stay in a smaller pot for longer.
Plants that are rootbound will eventually die. Check the root system in the pot if the leaves start to turn yellow or the entire plant starts to wilt. If you have one of those rootbound plants, you’ll probably need to do some root pruning to assist it survive.
How do you thicken a Dracaena trunk?
Weak stems bending toward the light and extra-narrow leaves are signals that the plant is lacking in light. Rachel Bernier is the source.
Question: I have a dracaena that is very green and has lovely leaves, but its stems are quite floppy, to the point where it barely stands up on its own, as you can see in the photo. What am I supposed to do with it? Is it possible to snip the top off and replant it?
Answer: Your dracaena (Dracaena marginata), also known as red-edged dracaena or Madagascar dragon tree, has been suffering from a lack of light for quite some time. It’s etiolated, in a nutshell. That’s why it reaches out so long and leans against the far-off window. Furthermore, the stems are thinner than they should be (and hence less able to support the plant), and the leaves are narrower.
And, certainly, you could chop off the top and root it as you propose. This is referred to as a stem cutting. Simply cut it off about 2 to 3 inches (5 to 8 cm) below the lowest leaves and place it in a moist potting soil container. To expedite the process, apply rooting hormone to the sliced surface. Even so, dracaenas take a long time to root, so don’t be surprised if you don’t see any new growth for a few months.
Another option is to cut the entire plant around the base and it will (very slowly) develop new stems. Alternatively, if you want multiple dracaenas, root the top to make one plant and let the old one grow back from the base.
If you wish to keep your dracaena in the same spot in the future, give it a quarter turn on a regular basis, possibly every time you water it, in the same direction. At the very least, this will prevent it from bending toward the light source.
Alternatively, employ it in a two-week rotation with another plant, giving it two weeks near a sunny window each month and then two weeks in its customary dark location. You’d be surprised how well foliage plants perform when given at least two weeks of good light per month!
Another option is to choose a plant that thrives in low light, such as a dieffenbachia, Chinese evergreen, pothos, philodendron, or even another dracaena. It turns out that your dracaena (Dracaena marginata) requires significantly more light than other commonly grown dracaenas, and that almost any other species (Dracaena fragrans, Dracaena deremensis, Dracaena sanderiana, etc.) would be better suited to that dark spot than the one you’re currently using.
Finally, to make your Dracaena marginata truly happy, place it permanently near a large window that receives plenty of light, at least two or three hours every day. Give it a quarter turn two or three times a month to keep it upright, but a well-cared-for dracaena will change dramatically in appearance, with thicker stems, wider and more numerous leaves, and an overall appearance of good health.
How do you prune a dragon plant?
Using sharp, sterilized pruning shears, cut the stem back to the desired height. Instead of cutting at an angle, cut straight across the stem, which exposes a bigger piece of the stem’s interior and exposes the plant to a greater risk of infection. Remove any dead or dried leaves by raking your fingers across the leaf crown. According to Kansas State University Research and Extension, if any yellow, discolored leaves persist, cut them off at the base using pruning shears, and new ones will sprout in their place.
How do you cut a plant that is too tall?
Plants that are too tall to propagate
- Make an upward 1″ slice just below a node on the stem of the “mother” plant with a sharp clean knife.
- Remove any bark or leaves from the plant stem a few inches above and below the slit.
Can you separate Dracaena marginata?
Takoma Park’s Teryl Hirtz: How do I divide a single stalk of solid green Dracaena into two distinct plants? I have multiple suckers on my Dieffenbachia; should I try to separate them while keeping the roots intact, or should I cut them on the stem and water root them?
I have a croton that has grown into its own plant from the top. How can I get this portion out of the way so I can plant it?
A. You can divide your Dracaena pretty much however you desire. Cut one or both plants down to the ground and root them in a 50-50 mixture of peat moss and clean sand. Place the medium in a pot and set the plant in it; firm the medium around the stalk and place a stake beside it; place the pot in a plastic bag large enough to contain the entire plant; close the bag by tying it to the top of the stake so the bag does not collapse on the plant. Maintain a warm environment, but keep it out of direct sunshine. When new growth appears, unzip the bag for a few minutes each day to gradually acclimate the plant to conditions outside the cage.
Give a mild push to see if roots have grown; resistance to your pull suggests that roots have formed. The plant can be potted in its permanent container in a well-drained potting soil once it has developed roots.
If you continue to water and care for the stalk of the original plant from which you cut plants, it will produce additional shoots.
Dieffenbachia roots easily from cuttings, which is great news for indoor gardeners.
Tall cane tips can be cut off and rooted in damp sand or water, then transplanted to regular potting soil containers.
Strong new shoots develop from the stubs in the pot when heavy stems are chopped to within an inch or two of the soil.
If I understand it correctly, the suckers on your plant may already have roots; detaching and potting them should be no problem; if they aren’t, cut them off and root them as suggested for Dracaena. Below the cut, the Dieffenbachia stub will produce new branches.
You can snip off the top of the croton and root it in the same way as the Dracaena was rooted. Alternatively, the top can be airlayered. Make a quarter-inch deep cut in the stem, angling it upward, for a basic air layer; use a sharp knife or razor blade. To keep the wound open, insert a toothpick. Wrap the incision in a piece of plastic and surround it with a handful of moist long-grain sphagnum; tie or tape the plastic at the top and bottom to keep the moss damp. Roots will emerge from the cut area; once they are visible in the moss, remove the wrap, cut off the rooted layer, and plant in a well-drained potting mix.
Eleanor G. May, North Garden, Virginia: Eleanor G. May, North Garden, Virginia: Eleanor G. May, North Garden How do you prune a cereus that blooms at night? Mine has a tall stem with leaves at the end and leaves at the base.
A. You can prune the plant as much as you wish. Cutting the lengthy stem, especially if it’s making the plant unwieldy or top-heavy, is a good idea. If you want to try propagating the cereus, grab the “heel” where the stem connects to the remainder of the plant. Cuttings are normally a foot or so long for propagation. The cutting should take root quickly if it is placed in clean sand and kept moist. Hyocereus can also take root in water.
Fairfax’s Walter E. Szuminski; After blooming, my Aechmea fasciata continued to send out shoots, which I separated from the main plant, put in different pots, and now have six plants. Is it possible for the transplants to bloom? How much time does it take? Is it possible to force the plant to bloom by placing it in a plastic bag with a decaying apple?
According to Victoria Padilla, a bromeliad expert, Aechmea will bloom in three years from seed under ideal growing conditions. As an offshoot, it will produce a blooming spike two years after being separated from the mother plant. If a mature plant is resistant to blossoming, it can be induced to do so by shifting its position, increasing the amount of light, increasing the amount of heat, or increasing the amount of food it receives.
All mature plants will bloom at some point. According to Dr. Henry M. Cathey, chief of Florist and Nursery Crops Research at the United States Department of Agriculture, a ripe apple and a plastic bag can transform a bromeliad into a bright-colored floral display. Simply place the plant in the bag, add the ripe apple, seal and knot the bag, and set aside for four days. Then, as normal, remove the bag and apple and care for the plant. The plant will bloom in one to six months, depending on the species.
Commercial growers utilize certain chemicals to speed up the blooming process at specific times.
Alexandria: John A. Beglin, “I have a huge spider plant that has been prolifically producing plantlets for over a year. There is what appears to be a seed pod about five or six inches above one of the plantlets. Is that a seed pod, or something else? Is it possible to grow more plants using seeds?”
A. The spider plant will occasionally produce seed along the stalk where the small white blossoms have flowered. Gather the seed and put it in a shallow container of growth mix; maintain the container warm (70 degrees) and slightly damp until the seeds sprout. The seedlings should then be exposed to bright light and fed monthly with a balanced houseplant fertilizer diluted to one-fourth the strength recommended by the manufacturer. When the seedlings have grown large enough to handle, transplant them to individual pots or multiple pots, as desired.
How long does it take Dracaena to root in water?
Dracaena marginata canes come in a variety of shapes and sizes, including twisted, straight, long, and short. Growers mould them into some bizarre shapes and forms. You may see a candelabra shape (which I gave to a friend before I left) here. Every two years or so, I cut back my taller Dracaena marginata, and you will most likely need to do the same.