How To Take Care Of Anthurium Clarinervium

Southern Mexico and Central America are the sources

Bright yet not in the direct path of the sun. The leaves may develop burn marks that resemble dry, brown spots under hot, direct sunlight.

Water deeply, making sure to reach all of the roots. Anthurium won’t accept damp soil, so don’t forget to empty the drainage tray. Before watering again, wait until the top few inches of potting mix are dry. In the fall and winter, water less frequently, but make sure the potting soil doesn’t dry out. Overwatering is indicated by yellow foliage.

This native of the tropics prefers moderate to high humidity levels. Place the plant on a humidity tray or use a cool-mist room humidifier if the relative humidity falls below 50%. Because of how susceptible the soft, thick leaves are to fungus, avoid misting plants with a sprayer. During the winter, indoor air can get incredibly dry without our awareness. Instead of assuming, it’s a good idea to utilize a humidity monitor next to your houseplant. Brown leaf tips could result from dry air.

Average to warm (65-80F/18-27C) in temperature. The optimal conditions for Anthurium clarinervium growth are constant temperatures. Its leaves can turn yellow if exposed to temperatures below 60F/10C. It’s a good idea to keep your Anthurium plant away from heat/AC vents because it dislikes drafts as well.

This houseplant needs an acidic, quick-draining potting mix to grow. Anthurium clarinervium, an epiphyte in the wild, prefers some air around its roots. 1 part medium-grade orchid bark and 1 part peat moss-based potting mix should be combined. You should repot your freshly acquired plant as soon as possible in the peat/orchid mix I suggest using if it comes in a container with all-purpose potting soil, especially if it is moist or compacted.

Fertilizer: Feed with a balanced water-soluble fertilizer every two weeks in the spring and summer. During the slower growth seasons of fall and winter, stop feeding.

Stem cuttings should be potted separately in tiny pots during the propagation process. Alternatively, you can cut off offsets that form around the plant, making sure each offset has at least two leaves and roots. Plants grow most vigorously in the spring, which is the best time to plant new ones.

Is it difficult to care for Anthurium clarinervium?

Although Anthurium clarinervium needs high humidity and attentive watering, it is a fairly resistant plant to pests and diseases. The high moisture content of its environment is a factor in most illnesses.

Use moderate treatments that don’t harm the foliage if you do encounter bugs. Castille soap made by Dr. Bonner is a fantastic choice. Spray the front and back of the leaves and petioles, and then after 20 minutes, wash them with lukewarm water.

Scale is a problem that could take a little more work to get rid of. Although soap treatment can be effective, it can be quicker to spray the insects with rubbing alcohol.

Avoiding overwatering and making sure water doesn’t pool on leaves is the greatest method to fight disease.

When should Anthurium clarinervium be watered?

Avoid overwatering your anthurium clarinervium to maintain correct care and avoid root rot.

You might need to water your Anthurium clarinervium as frequently as once or twice each week throughout the growing season. You need to water less frequently in the fall and winter—possibly only once every few weeks or so. Anthuriums should generally only be watered when the top 1 to 2 (2.55 cm) of the plant is dry.

Verify the soil is dry before watering a velvet cardboard anthurium. Dig your finger into the ground about an inch. Your plant needs water if the potting soil is dry. Wait a few days before checking again if moisture is found. But you should always let the soil tell you when to water.

Watering your Anthurium clarinervium less frequently but more thoroughly is another great advice. The roots will be fully hydrated if the soil is given a thorough soaking. After saturating the soil, let all extra water drain before relocating the plant to a light area.

Refrain from the urge to water your plant lightly and frequently. This method of watering anthuriums is useless because it prevents the roots from absorbing moisture. All that takes place is that you make the soil surface very moist. As a result, your plant may eventually exhibit underwatering symptoms as well as succumb to fungus gnats and white soil mold.

These elements influence how frequently you should water your plant:

  • ClimateHouseplants require more frequent watering in warm, dry weather than they do in cold weather.
  • SeasonDuring the late fall and winter, plants go into dormancy and need less watering.
  • Kind of pot
  • Terracotta or clay pots lose moisture more quickly than plastic ones. Anthuriums growing in unglazed clay pots require more frequent watering than those growing in glazed or plastic pots.

How may Anthurium clarinervium growth be aided?

Plants grow better when a high-quality fertilizer, like this one from Amazon, is added. To increase its durability, it also needs fertilizers. This plant doesn’t require fertilizers all year long.

In order to encourage plant development and greenery, they must be added during the growing season. Its growing season lasts from March through September. A quality fertilizer, like this one, should be used at this time to encourage plant development. During the plant’s dormant winter months, little fertilizer is required.

During the growing season, fertilize plants half-strength once every two months. To maintain the plant healthy over the winter, fertilizers must be put to it every three months.

Do the leaves of Anthurium clarinervium enlarge?

Numerous Anthurium species can grow to unmanageable sizes within the house. The clarinervium is a species with a reduced growth rate that is ideal for indoor cultivation! The leaves will increase in size indoors to approximately 6 or a little more.


Most of the time, these plants prefer strong indirect light or filtered sunlight. Keep these plants away from excessive sunlight. No problem with a little.

If you live in a location with far fewer and cloudier days, like I do, the winter is an exception. These plants will benefit immensely from some direct sunlight throughout those months.

My own plant is placed in a window that faces east to receive morning sunlight. I put the plant outside in total shade during the summer.


Anthuriums prefer warm climates and prosper there. If you can, try to maintain them around 70 to 90 F (21-32 C). Although it does drop down to the 60s (F) in the winter where I keep mine, I wouldn’t go any lower.


Although a greenhouse is the ideal place to cultivate anthuriums since they enjoy high humidity, you can grow them effectively indoors with a little care.

I would strongly advise purchasing a humidifier if the dry indoor winter air in your home is a result of forced air heating. I tried out several different humidifiers before settling on one that I ADORE.

I use it from roughly October to April or May (or whenever we put on the heat in the house), so (when we normally shut off the heat).

Try to maintain a relative humidity of at least 40%, if not greater. 50–60% indoors would be preferable.

Do you require a reliable humidifier? I love mine, so if you’re in the market for one, check out my blog article where I discuss humidity, houseplants, and my favorite humidifier.

I’ve tried a ton of humidifiers, and I discuss the top one I found. During the winter, I never stop using it!


Anthuriums are epiphytes, which means they grow on trees and tree branches like many orchids do. Even though they frequently get wet from heavy rains, they dry out quickly because their roots are more exposed as a result of the way they develop.

These plants will die and decay if you allow them to sit in water. After fully watering, be sure to drain any extra water. Allow it ALL to evaporate. Keep them off the saucer underneath.

Wait to water again until the potting mix’s top inch or two are completely dry. Just feel that with your finger.

The potting mix should be kept mostly mildly moist, with the top few inches being dry and the remainder barely moist. Don’t water if the ground is still damp underneath. Continue to wait and keep an eye on your plants!

However, having good watering practices is not enough. An proper potting soil is also necessary for epiphytes like Anthurium to thrive.


These plants need excellent drainage because they are epiphytes. I like to add orchid bark to my potting mix to achieve this. The “key to cultivating these plants” is this.

You can begin by mixing 1 part of orchid bark with 2–3 parts of your preferred all-purpose peat–based houseplant potting soil. This will give them the incredible drainage they require to flourish.

These plants appreciate the excellent, chunky mix that is created when potting soil, perlite, and orchid bark are mixed in equal portions. This is the mixture I’m using right now for this plant.


In the spring and summer, fertilize plants when they are actively growing. Every time I water, I like to apply diluted fertilizer (or almost every watering).

Dyna-Gro Grow is my preferred indoor plant fertilizer, which I can get on Amazon. I use it on all of my leafy tropical plants and use 1/4 teaspoon per gallon of water.

It is a fantastic fertilizer that is FULLY COMPLETE and urea-free, so it won’t burn your plants. I’ve had fantastic results using this fertilizer, and I highly suggest it.


They enjoy air flow since they are epiphytes. Consider this. They are exposed to a lot of air movement in nature because they are growing on the sides of cliffs, rocks, and trees.

All plants, but notably epiphytes like Anthuriums, will benefit from air movement. I’m not referring to chilly drafts, though—you should stay away from those.

With the help of my ceiling fan, I enjoy softly circulating the air in my sunroom. It will offer circulation for my orchids, anthuriums, and other plants when I switch it to the lowest setting.

Open a window if it’s warm outside to let fresh air in. Or even better, leave it outside in the shade throughout the summer to benefit from the rainwater, fresh air, and greater humidity levels.


If your Anthurium has more than one stem, division during repotting is the best method of propagation. Tease apart any new growth while gently loosening the roots.

Make sure each split has roots and at least one or two of its own leaves before planting it in a separate container.

Where to Buy Anthurium Clarinervium

This is the true difficulty! This is a highly sought-after plant that is both pricey and challenging to locate. On the majority of websites, the word “out of stock” will appear next to Anthurium clarinervium.

Are you interested in buying an Anthurium clarinervium? Etsy is one of my favorite and most useful one-stop sites for purchasing almost any plant. Today, see the assortment of Anthurium clarinervium (link to Etsy).

In any case, here are a few additional sources to keep an eye on. For some of them, you may even join the waiting list. I’ve had excellent encounters with both of these firms, which are both outstanding.

I heartily recommend NSE Tropicals in Florida since they have an incredible selection of tropical plants.

I bought mine through PA Orchid Exchange, although it is not an often supplied item (but then again, it probably isn’t everywhere!). When I got mine, it was wonderfully packaged.


Although no one grows this plant for the blossoms, I have discovered that they do appear rather frequently.

I often just clip off the insignificant blossoms to direct my plant’s efforts toward developing new leaves.

My Clarinervium is yellow; why?

Plants called Anthurium clarinervium are unique. The plant needs to feel as though it is in a tropical forest. You must replicate its natural environment.

Otherwise, it can lead to a disgruntled plant. But there are other things that might make a plant sad as well. In either case, advice on caring for a sick Anthurium clarinervium plant can be helpful.

Your Anthurium Clarinervium Plant’s Leaves are Turning Yellow

Your Anthurium clarinervium plant is stressed if its leaves are becoming yellow. This typically indicates moisture or water stress in your plant.

Verify the plant’s soil. It shouldn’t be too wet in the soil. You should water the plant less if you’re overwatering.

When plant owners notice fading leaves, they frequently assume the plant needs additional water right away.

However, this is frequently the case. The root system may receive less oxygen if it is overwatered.

In essence, water replaces the oxygen spaces in the soil. Typically, this first manifests itself in the plant’s leaves, which start to turn yellow.

If not, the leaves will shortly turn yellow. The soil must be continually damp, but not soggy, just mildly damp.

Your Anthurium Clarinervium Leaves Have Brown Tips

If Anthurium clarinervium plants don’t get enough humidity, their tips will become brown.

The key to growing tropical plants successfully is to imitate their native environments. They won’t thrive the way you want them to if that happens.

The high humidity for the Anthurium clarinervium plant is one thing to do right.

An Anthurium clarinervium plant needs a humidity level of at least 60%, as we mentioned earlier. However, if you want the best possible growth, the humidity level should be approximately 80%.

Your Anthurium Clarinervium Plant’s Foliage is Dull

Lack of light causes Anthurium clarinerviums to have dull leaves and veins, which are unhealthy.

Slow or stunted development is another significant indicator that your plant needs more light.

The photosynthetic process cannot take place when the plant is not receiving enough light. So the Anthurium clarinervium plant cannot provide all the nourishment it requires.

You must be cautious when resolving the issue because you don’t want to expose your plant to direct light.

Put it in your window if there isn’t much light available. But stay away from windows that face south or west.

Stay with windows that face north or east. However, it won’t receive direct sunshine.