Why Is My Air Plant Dying

More air plants perish from overwatering than from underwatering. The telltale indicator is when the bottom of your air plant appears brown and slimy. Instead of submerging or soaking your air plants, try misting them with a spray bottle. In between waterings, make sure your air plant has completely dried out. Only mist your air plants 1-3 times each week. Less can be more. It’s crucial to dry your air plant within four hours because they can become overwatered if they don’t. Get a fan for your air plant if it doesn’t dry after four hours of watering, and water it less the following time.

2. Insufficient air causes air plants to lack nutrients. It results in “dry rot.” There won’t be enough food if there isn’t enough air movement around air plants. Keep in mind that air plants consume nourishment. Terrariums and small, quiet locations like toilets shouldn’t be used to house air plants because there isn’t enough airflow in these areas. Instead, pick a place with lots of natural light and fresh air, such as close to an open window, in a large room with other rooms adjacent to it, in a courtyard or on a veranda. Lack of air flow can also lead to overwatering because it delays the air plants’ ability to fully dry up. The problem with air plant holders is dry rot. Your air plant may develop dry rot on the area of the plant that has poor air flow from the planter if the base is placed in a planter, such as a pot, hanger, or pouch, that has no ventilation. Before you notice the rot, it will have spread and your air plant will be dead.

3. Lack of Light – To produce their own nourishment, air plants require light. If your air plants are indoors, make sure they are one meter or less from a window. They’ll definitely perish from lack of sunshine if you put them in a dark hallway.

4. Too much direct sunlight will burn your plant or severely dry the foliage. Generally speaking, 45 minutes of moderate early morning or late afternoon direct sunshine is acceptable. However, it is advised to use filtered sunlight or total shade.

5. Frost – Because they are sensitive to the cold, air plants. They dislike temperatures below 0 degrees Celsius. If you live in a chilly climate, you might want to think about bringing your air plants inside during the winter.

6. Humidity – some types of air plants like it when the humidity is high. If the leaves of your air plant are too curled, the air may be too dry for the plant. Spraying or soaking air plants in water just isn’t enough moisture if the air is too dry. Consider soaking your air plant for 30 minutes each week in addition to your regular spraying if you believe it died from low humidity. or daily spray your plant. Additionally, you can put the air plant on a piece of driftwood or any object that can hold moisture. Another choice is to make a bed using a mixture of 50% perlite and 50% orchid potting mix. Spray the mixture every time you spray your plants. Your air plants might even drop roots into the mixture since they are so content.

7. Rust – Your air plant will develop dead areas as a result. Keep your plant away from anything that is rusty. Regular wire might rust in the future. For mounting air plants, use plastic-coated or galvanized wire.

8. Copper wire is well recognized for killing air plants. Copper is poisonous to air plants, particularly when it is regularly moist.

9. It’s typical for the mother air plant to pass away. Air plants develop, blossom, give birth to pups, and then go extinct. If your air plant has already bloomed and produced pups, it’s entirely possible that she is about to die. Don’t get rid of her just yet. Before she leaves, she might surprise you by bearing even another pup.

A dead air plant you purchased from us? Give air plants another go with this 20% off coupon. To receive 20% off your upcoming order of air plants, use the promo code AIRDEAD at checkout.

How can a dead air plant be revived?

Why keep dying my air plants? It’s likely that your Tillandsia is really thirsty if it doesn’t appear its best, especially if it’s shriveled or discolored. Spritzing normally doesn’t give enough moisture to keep the plant healthy and hydrated, despite the fact that misting the plant is frequently advised.

When this is the case, reviving a Tillandsia entails getting the plant back to its previous condition of health and hydration. The simplest way to do this is to submerge the entire plant in lukewarm water in a bucket or basin. To prevent the plant from floating to the surface of the water, you might need to attach it to a hefty item.

Allow the bowl to soak for 12 hours in a warm place. The plant should be taken out of the bowl, laid out on a layer of paper towels, and allowed to air dry before being put back in its usual spot.

Repeat the technique, but this time leave the Tillandsia submerged for only around four hours if the plant seems dry and sickly. Shake the plant lightly while holding it upside-down to drain the leaves of extra moisture.

Can you revive a dead air plant?

Most people will at some point in their adventure of cultivating tillandsias wonder how to revive their air plants. Finding the source of the problem is the first step in saving any air plant. After that, you can take the necessary steps to address the issue that is harming your air plant.

Your air plant may occasionally start to seem very white or gray. A naturally green air plant that is going very white or gray could be an early symptom of your air plant drying, even though it is typical for your air plants to be covered in a coat of white or gray hair or trichromes in most circumstances.

When your air plant becomes extremely white or gray, the good news is that it is not dying. When the air plant is dehydrated, the trichromes are simply becoming more noticeable and making the plant appear paler than usual.

A dry air plant can be brought back to life by soaking in water for 5-8 hours. After soaking, shake out any excess water, and let your air plant to dry out in 4 hours. Up until the plant no longer appears dry, repeat the prolonged soaking every two to three days.

If your air plant is drying out again after being rejuvenated with a series of prolonged soaks, check the light, temperature, and humidity conditions of the immediate area.

To assist your air plant maintain moisture, place it away from direct or extremely bright indirect light. Around 5090 F is the ideal temperature for air plants. If you subject your air plant to severely cold or hot temperatures, it could be difficult to recover it. It’s possible for the air plant to become too dry to survive in extreme temperatures.

The air plant’s brown or black leaves are often an indication of root decay. When air plants are not completely dried off after watering, they might get root rot. The air plant is prone to fungus infections that irreversibly harm the plant cells when the leaves are frequently damp. The air plant would eventually turn brown or black as a result of these dead cells.

As soon as you notice the brown or black leaves, you can carefully remove those leaves to revitalize your air plant and stop the infection from spreading. To prevent root rot, keep the air plant in a place with sufficient airflow and allow it to dry out promptly after each watering.

The air plant may perish in severe cases of root rot that have reached the plant’s center. You will need to try again with a fresh plant if the root rot is so severe that the plant begins to fall apart.

It can take some trial and error to understand how to grow air plants. The most frequent explanation for “why is my air plant dying” is root rot as a result of the air plant not drying out correctly. Air plants might wither from dryness, lack of light, or lack of nutrients in the water.

To lessen the likelihood of root rot in the future, you might try several techniques and situate your air plant somewhere with more air movement.

Can you revive a dead brown air plant?

The ability to cultivate air plants anyplace is their best quality. A dramatic addition to both indoor and outdoor areas, air plants are distinguished by their spike-like, scaly green foliage. These epiphytic plants can thrive without soil. Through their leaves, they absorb all the nutrients and moisture from the surrounding air.

Air plants require little upkeep. But if yours are seeming droopy, shriveled, or brown, they might require additional attention. Thankfully, it’s not that difficult to revive air plants. There are numerous simple treatments, such as pruning the damaged or dead branches or submerging the plant in water.

How can you tell whether your air plant is on its way out?

The leaves of a healthy air plant should range in color from green to gray. The plant should not break when you lift it up. In other words, leaves should not fall from an air plant that is healthy.

You can do a variety of things to resuscitate a plant. Here are the steps I take to aid in the recovery of my air plants’ health.

Give the Air Plant an Overnight Soak

When I’m trying to revive an air plant, I always start by watering it. Keep in mind that although air plants don’t need soil, that doesn’t imply they don’t need water. Water is a necessity for all living things, even air plants.

Since air plants don’t have roots, they must instead collect moisture and water through their leaves because they lack soil. There have been too many times I have heard that garden centers recommend spritzing air plants with water a few times a week. This is not enough water, in my opinion, and the plant will become thirsty. Sadly, if this persists for a long enough period of time, the air plant will die.

How Long Should I Soak my Air Plant?

I give my air plants an hour-long bath to make sure they receive the water they need. I do this on a weekly basis during the summer when it’s warmer and roughly every three weeks throughout the winter. I enjoy using rainwater because I live in a rainforest. But you can also use regular tap water! To let the chlorine vaporize, simply leave the water out for 24 hours.

Simply take the air plant out of its current container and place it in a bowl of water after that. The basin needs to be big enough for the plant to fully submerge. After a half-hour or so, remove it from the bath. To make sure that water isn’t gathering in your air plant’s leaves while it’s upside down, give it a couple gentle shakes. After that, return the plant to its location. It’s that simple!

Make Sure Your Air Plant has Air!

Even though it might seem simple, your air plant requires oxygen to survive. There are numerous pictures of air plants being kept in tightly sealed jars floating about, and they make me scoff since plants cannot survive in that kind of environment!

The answer is simple.

You can continue to preserve your adorable jar terrarium, but be careful to keep the lid slightly ajar or open to allow air to flow freely.

Remove Dead Leaves

A sick air plant should also have any dead leaves removed by gently tugging on them to check if they fall off. They are dead if they are simple to remove. Unfortunately, you have a dead air plant that has already perished if the entire plant crumbles when you do this.

Your air plant will survive, though, if only a few leaves fall off and the interior leaves are green and healthy-looking.

Look at the Tips of Your Air Plant

Try using rainwater or unchlorinated water as mentioned above if the tips of your air plant are starting to turn brown. Your plant may not be getting enough water if you are not giving them chlorine yet they are still turning brown.

After giving them an overnight bath, make sure you give them baths more frequently.

What if my Air Plant Falls Apart?

You have a dead air plant on your hands if your green air plant just falls apart. This probably happened as a result of spending too much time in water that was left standing or from not adequately shaking off after a bath.

Reread the section about watering, and the next one will undoubtedly go more smoothly.