More air plants perish from overwatering than from underwatering. The telltale indicator is when the bottom of your air plant appears brown and slimy. Instead of submerging or soaking your air plants, try misting them with a spray bottle. In between waterings, make sure your air plant has completely dried out. Only mist your air plants 1-3 times each week. Less can be more. It’s crucial to dry your air plant within four hours because they can become overwatered if they don’t. Get a fan for your air plant if it doesn’t dry after four hours of watering, and water it less the following time.
2. Insufficient air causes air plants to lack nutrients. It results in “dry rot.” There won’t be enough food if there isn’t enough air movement around air plants. Keep in mind that air plants consume nourishment. Terrariums and small, quiet locations like toilets shouldn’t be used to house air plants because there isn’t enough airflow in these areas. Instead, pick a place with lots of natural light and fresh air, such as close to an open window, in a large room with other rooms adjacent to it, in a courtyard or on a veranda. Lack of air flow can also lead to overwatering because it delays the air plants’ ability to fully dry up. The problem with air plant holders is dry rot. Your air plant may develop dry rot on the area of the plant that has poor air flow from the planter if the base is placed in a planter, such as a pot, hanger, or pouch, that has no ventilation. Before you notice the rot, it will have spread and your air plant will be dead.
3. Lack of Light – To produce their own nourishment, air plants require light. If your air plants are indoors, make sure they are one meter or less from a window. They’ll definitely perish from lack of sunshine if you put them in a dark hallway.
4. Too much direct sunlight will burn your plant or severely dry the foliage. Generally speaking, 45 minutes of moderate early morning or late afternoon direct sunshine is acceptable. However, it is advised to use filtered sunlight or total shade.
5. Frost – Because they are sensitive to the cold, air plants. They dislike temperatures below 0 degrees Celsius. If you live in a chilly climate, you might want to think about bringing your air plants inside during the winter.
6. Humidity – some types of air plants like it when the humidity is high. If the leaves of your air plant are too curled, the air may be too dry for the plant. Spraying or soaking air plants in water just isn’t enough moisture if the air is too dry. Consider soaking your air plant for 30 minutes each week in addition to your regular spraying if you believe it died from low humidity. or daily spray your plant. Additionally, you can put the air plant on a piece of driftwood or any object that can hold moisture. Another choice is to make a bed using a mixture of 50% perlite and 50% orchid potting mix. Spray the mixture every time you spray your plants. Your air plants might even drop roots into the mixture since they are so content.
7. Rust – Your air plant will develop dead areas as a result. Keep your plant away from anything that is rusty. Regular wire might rust in the future. For mounting air plants, use plastic-coated or galvanized wire.
8. Copper wire is well recognized for killing air plants. Copper is poisonous to air plants, particularly when it is regularly moist.
9. It’s typical for the mother air plant to pass away. Air plants develop, blossom, give birth to pups, and then go extinct. If your air plant has already bloomed and produced pups, it’s entirely possible that she is about to die. Don’t get rid of her just yet. Before she leaves, she might surprise you by bearing even another pup.
A dead air plant you purchased from us? Give air plants another go with this 20% off coupon. To receive 20% off your upcoming order of air plants, use the promo code AIRDEAD at checkout.
How can a dried-out air plant be revived?
Most people will at some point in their adventure of cultivating tillandsias wonder how to revive their air plants. Finding the source of the problem is the first step in saving any air plant. After that, you can take the necessary steps to address the issue that is harming your air plant.
Your air plant may occasionally start to seem very white or gray. A naturally green air plant that is going very white or gray could be an early symptom of your air plant drying, even though it is typical for your air plants to be covered in a coat of white or gray hair or trichromes in most circumstances.
When your air plant becomes extremely white or gray, the good news is that it is not dying. When the air plant is dehydrated, the trichromes are simply becoming more noticeable and making the plant appear paler than usual.
A dry air plant can be brought back to life by soaking in water for 5-8 hours. After soaking, shake out any excess water, and let your air plant to dry out in 4 hours. Up until the plant no longer appears dry, repeat the prolonged soaking every two to three days.
If your air plant is drying out again after being rejuvenated with a series of prolonged soaks, check the light, temperature, and humidity conditions of the immediate area.
To assist your air plant maintain moisture, place it away from direct or extremely bright indirect light. Around 5090 F is the ideal temperature for air plants. If you subject your air plant to severely cold or hot temperatures, it could be difficult to recover it. It’s possible for the air plant to become too dry to survive in extreme temperatures.
The air plant’s brown or black leaves are often an indication of root decay. When air plants are not completely dried off after watering, they might get root rot. The air plant is prone to fungus infections that irreversibly harm the plant cells when the leaves are frequently damp. The air plant would eventually turn brown or black as a result of these dead cells.
As soon as you notice the brown or black leaves, you can carefully remove those leaves to revitalize your air plant and stop the infection from spreading. To prevent root rot, keep the air plant in a place with sufficient airflow and allow it to dry out promptly after each watering.
The air plant may perish in severe cases of root rot that have reached the plant’s center. You will need to try again with a fresh plant if the root rot is so severe that the plant begins to fall apart.
It can take some trial and error to understand how to grow air plants. The most frequent explanation for “why is my air plant dying” is root rot as a result of the air plant not drying out correctly. Air plants might wither from dryness, lack of light, or lack of nutrients in the water.
To lessen the likelihood of root rot in the future, you might try several techniques and situate your air plant somewhere with more air movement.
Why keeps drying out my air plant?
Why keep dying my air plants? It’s likely that your Tillandsia is really thirsty if it doesn’t appear its best, especially if it’s shriveled or discolored. Spritzing normally doesn’t give enough moisture to keep the plant healthy and hydrated, despite the fact that misting the plant is frequently advised.
When this is the case, reviving a Tillandsia entails getting the plant back to its previous condition of health and hydration. The simplest way to do this is to submerge the entire plant in lukewarm water in a bucket or basin. To prevent the plant from floating to the surface of the water, you might need to attach it to a hefty item.
Allow the bowl to soak for 12 hours in a warm place. The plant should be taken out of the bowl, laid out on a layer of paper towels, and allowed to air dry before being put back in its usual spot.
Repeat the technique, but this time leave the Tillandsia submerged for only around four hours if the plant seems dry and sickly. Shake the plant lightly while holding it upside-down to drain the leaves of extra moisture.
Is it normal for air plants to feel dry?
LIGHT: You should constantly give your air plants a sufficient amount of light. In the summer, the only thing to keep in mind is to never leave them in the sun. The plants can quickly dry out if they are exposed to too much light. It is usually acceptable to leave them in direct sunshine from October through March, but keep a constant eye on them to make sure they are not overheated. We like to keep our air plants in our home no more than 4 feet from a window and in a location with plenty of strong, indirect light.
Florescent lighting is the best type of artificial light for air plants. Plants need to be placed between 6″ and 35″ away from fluorescent lighting. Only expose your air plants to light for roughly 12 hours each day. If you’re going to keep your air plants in artificial light, I’d advise using a timer that runs automatically to ensure they get the right amount.
Water: You should water your air plants many times a week if you reside in a dry area. If you reside in a cool, humid climate, watering once a week is good. Fill a container with water until the plants are completely submerged to water your air plants. After around 30 minutes, remove your plants and let them dry. After watering, plants should have access to adequate light and airflow to dry within four hours.
Always dry air plants upside down, if at all possible. This guarantees that there is no standing water at the base of the plant, which might easily cause the interior to rot. For this reason, before soaking, you should also remove plants from decorative fittings. If you live somewhere dry, you might want to spray your plants in between waterings. If your plants aren’t getting enough water, you’ll notice because the leaves will start to curl in an unusual way and feel dry to the touch. If you have mounted air plants, you can mist them, but during the warmer months, make sure to mist them frequently.
Air Movement:
Tillandsias should receive enough light and airflow after each watering so that they dry in four hours or less. Avoid keeping plants consistently moist or wet.
The recommended temperature range for air plants outside is between 50 and 90 degrees Fahrenheit. For growing your plants, the average home environment is perfect.
Use fertilizer for air plants once or twice per month. It facilitates flowering and reproduction. The “Air Plant Food” from Air Plant Hub is suggested. It includes a mixture of fertilizers made especially for epiphytic plants (air plants)!
How to Water an Air Plant
The most challenging aspect of caring for air plants is watering them. Some individuals use misting religiously, others immerse their air plants, while yet others utilize a mix of misting and soaking.
In our experience, watering air plants is challenging because the plant’s requirements differ significantly depending on the environment. Additionally, some species need particular care. Assessing your environment is the first step in watering your air plant. How much light is reaching your plant? What’s the temperature like inside your house right now? Is there a lot of dry air there (is your plant close to a heater or fireplace)? Is it also really humid?
Following your responses, you can modify the air plant watering schedule to meet your specific requirements. Here is what we suggest as a place to start:
- Every one to two weeks, give your air plant a 5- to 10-minute soak in room-temperature tap water (or, if you can get it, rainwater or pond water).
- Once your plant has soaked, gently shake off any extra water. It should be placed on a towel upside down in a well-lit area. This is very crucial. If extra water is allowed to stand, air plants will quickly decay.
- The plant should be able to dry completely in 3 hours once the soaking process is finished. More time than this could cause your plant to decay. Try putting it somewhere brighter with better airflow to encourage quicker drying.
- Mist your plant well once a week (instead of watering it). Make sure the entire surface is saturated (but not so much that there is water dripping down into the plant).
- You need to water more when the air is hotter and dryer (summer, early fall). Your air plant will require less water during the cooler and more humid seasons (winter and spring). Just be mindful of your plant because heaters and fires dry out the air.
- Water everything in the morning. Evening sopping or sprinkling interferes with the plants’ ability to breathe at night and prolongs the drying process.
Is My Air Plant Getting Enough Water?
The tops of your air plant’s leaves may turn brown or crispy if you’ve been neglecting to water it. When an air plant is under-watered, its leaves’ inherent concavity tends to become more pronounced.
Unfortunately, it’s frequently too late to save an overwatered air plant. Your plant has certainly succumbed to rot if the base of the plant turns dark or black and leaves are falling out or off from the center.
Regarding temperature, air plants are fairly tolerant. They thrive between 50 and 90 degrees Fahrenheit. The ideal temperature difference between daytime and nighttime is roughly 10 degrees.
To maintain your air plant healthy, include orchid or specific air plant fertilizer in your watering routine once or twice a month. Simply sprinkle some in your water, then carry on as usual. Your air plant will blossom and propagate if you fertilize it (or pup — more on this later)
How frequently do I need to water my air plant?
For the best care, your plants should be watered 2-3 times each week in addition to once every week. Every 2-3 weeks, a 2-hour bath should be taken. You will need to water or mist your plants more frequently if you live in a hotter, drier region. Your plant’s leaves will start to feel heavier and more wet after watering, and they will be softer and lighter in color when they require more water. Dehydration may be indicated by leaves that are wrinkled or rolled.