Tillandsia, often known as an air plant, is a type of plant that grows on the bark of tropical trees in its natural habitat. Tillandsia and other epiphytic plants grow on the surfaces of other plants without causing any harm to them. They get their nutrients and water from humidity and rainfall rather than relying on the trees for nourishment. An epiphyte doesn’t require soil because it lives on the tree’s surface. There is a misconception that airplants just require air to survive, but this is untrue—they also require moisture and humidity!
The climate of Colorado is quite dry and desert. Your tillandsia needs a high humidity level to survive. You’ll frequently read that you should soak them for several hours. We don’t advise soaking airplants because that’s not how they get water in their natural environment. They enjoy being misted frequently, so we advise running them briefly under a running sink a few times per week.
Where can air plants be hung most effectively?
All air plants come from tropical climes where cold and ice never occur. It’s crucial to keep them at a reasonable temperature without a sweater, right? typically from the 1960s or earlier. Keep them away from windows that are cold in the winter and air conditioner vents.
At least a few hours of bright, indirect sun each day are necessary for air plants to thrive. The optimal placement is between one and three feet from an east or west-facing window, or around two feet from a source of artificial light. They can be exposed to hotter, more direct sun for longer periods of time if you maintain them well-hydrated. Avoid areas that are poorly lit.
Can air plants be placed anywhere?
- Don’t bury them in the ground. Ever. Because they are epiphytes, they grow atop other plants rather than in the ground.
- You can plant them in imaginative locations because they don’t require dirt. One can be set in a shallow bowl or vase with rocks or sand, one can be put in a small container with a magnet and placed on the refrigerator, or one can be tied to driftwood with a clear fishing line.
- Don’t confine them to a terrarium. Yes, they are adorable, and Instagram is full with pictures of air plant terrariums, but air plants need to breathe. They will become overly damp in a confined vessel, which will cause them to rot or contract a fungus.
How are air plants cared for in Colorado?
The genus Tillandsia of the bromeliad family contains these tropical “Air plants” (epiphytes). They are the first relative of Spanish moss and typically reside among ferns and orchids in the treetops in their natural habitat.
Their surroundings must have good air flow and strong, filtered light. They eat decaying leaves, bark, and bug droppings that fall into the rainwater that is collected in the plant’s central “cup”. The nutrients are absorbed by the leaves as it all decomposes, and the roots are solely employed to cling to the bark.
Air plants can be fastened to any surface with silicone-based glue or Liquid Nails, or they can be wired or stapled to a piece of wood. They can also be potted in any container using bark, moss, or twigs and grow nicely in coral or lava rock. To take root, they must be firmly anchored or wedged; they cannot sit in standing water because this would destroy the plant.
When cultivated indoors, air plants require a thorough soaking once or twice each week. For a while, completely submerge the plant—overnight is fine. Shake off extra water from plants that are maintained in containers without drain holes or tip the container upside down to remove any standing water to prevent plant rot. Never use softened or water that has been chlorinated. They prefer being outside, so use city water, but leave it out overnight to allow the chlorine vaporize. Rainwater is preferable.
Air plants should be protected from the sweltering summer sun and given brilliant, filtered light. Since they are tropical plants, they can survive the summer hanging from a tree without any care, but they must be brought indoors before the first frost. You might need to water them more frequently when they are indoors with the heat or air conditioning on. Make sure to keep them away from the vents’ direct draft. Take your plants outside on warm days (55 F) during the winter; shield them from chilly breezes while allowing them to breathe fresh air. They won’t be harmed by full sun in the winter.
Use a tiny amount of fertilizer each time you water your bromeliads or fertilize once a month (half-strength). Use any water-soluble plant food, including Miracle-Gromix or Jack’s Classic, half-strength with water and sprinkle the plant all over, or use it in the soaking solution. Wet table powder works best as an insecticide or fungicide when used at half-strength.
When fully developed, bromeliads bloom, and from the pups that emerge from amid the leaves, new plants form. When the puppies are half as big as the mother plant, separate them; put them in sphagnum moss until roots begin to appear; you can then mount them if you choose. The mother plant can give birth to up to a dozen puppies before gradually dying.
The most fascinating and adaptable plants are bromeliads. You are only constrained by your creativity when choosing arrangements! a summer rainy day! If you must, you can substitute well water or distilled water.
How old are air plants on average?
Perennial plants are tillandsias, also referred to as air plants. According to the source, they have a lifespan of between two and five years, which indicates that they normally survive longer than two years.
The type of air plant and the growing conditions have an impact on how long they live, though. They reside in deserts, on various surfaces, and on tree branches in their natural habitat (other surfaces they can grow on).
Air plants only experience one flowering during their existence, which marks the culmination of their development and maturity.
Depending on the species, the flowers might remain in bloom for a number of months. However, the air plant will begin to die when the blossoms start to wilt and fade. Air plants develop pups or offsets before they die to carry on the same growth cycle.
Despite the mother plant dying, you can take the pups out and raise them separately. Separating the pups from the mother is referred to as “division is a method of air plant propagation.
As an alternative, you might leave those puppies grouped together ” (also known as “tillandsia balls).
Do you soak air plants with their tops up?
It is best to provide air plants with water that is rich in minerals and nutrients because they obtain many of their nutrients directly from the water. The best water is rainwater, although spring water is a close second if you don’t have a convenient way to collect rainwater. Alternatively, you might utilize well, lake, or creek water. Never use filtered or distilled water. Less minerals and nutrients are present in distilled and filtered water. Many municipal water systems include fewer minerals and nutrients and more contaminants. If you are concerned about your pH level, air plants enjoy slightly acidic water. The ideal range for alkalinity is between 5.5 and 6.0. Most frequently, tap water from the city is higher than this range, making it unsuitable for air plants. Do not worry yourself too much about PH levels. Any good, pure water would do.
After watering your air plants, thoroughly drying them off is the second most crucial step. To ensure that your air plants completely dry, put them down on a dish towel on their side or upside down. For the larger species like Xerographica, Streptophylla, and Sparkler, this is especially crucial. Within two hours of their bath, they should be completely dry to the touch. Wait until your air plants are completely dry before putting them back in terrariums and vases. If you water your plants and then put them in an enclosure right away, your plant can get rot. Your air plants will be content and healthy if you follow these straightforward watering guidelines.
Can air plants be grown on rocks?
On shrubs, rocks, and bushes, air plants can grow. Other epiphytes include several fern species and orchids, which are found on tropical trees.
How often should my air plant be soaked?
I wanted to go into more detail about this because our Facebook Page gets a lot of questions about how to water air plants. Although tillandsia, often known as air plants, are simpler to maintain than many other plant species, they still need some care and attention, and water is crucial to their general well-being. Here are some frequently asked questions about watering air plants along with our suggestions:
This mostly relies on your climate, where you’re keeping the air plants, the Tillandsia species itself, and the environment in which it naturally grows (learn more about mesic vs. xeric air plants here). Since most of the year is humid where we live in Tampa, Florida, we don’t run the heat in our home as often as our friends in the north do (I’m not trying to pick on them, I swear!). We typically water our plants twice a week, but drier climates require more frequent watering. Depending on the season, you may discover that you need to water your plants less. Additionally, it depends on where you put them at your house or office. The plants will stay more wet in a humid bathroom, but you’ll probably need to water them more frequently if they’re close to an air vent or a heat source. (Note: We don’t advise keeping your plants close to heat sources.)
It should be noted that while humidity might slow down drying, it in and of itself is insufficient for watering.
Again, you should modify your watering practices according to your climate and the species of your air plants, but for the majority of air plants and surroundings, we advise that you immerse your plants in water at least once a week. Use something that allows you to totally submerge the air plants, like a bowl, bucket, or your sink. Give them a lengthier bath for an hour or more every other week if you live in a dry area. Soak for 30 to 60 minutes at least once a week. You might wish to shorten the soaks if you reside in a location with higher humidity or if your air plant is more xeric in nature.
You should allow the air plants to completely dry after soaking. They can either be let to dry with their leaves facing down or turned over and gently shaken. If water is allowed to sit in the leaves, the plants risk rotting. The plants should be placed in an area with sufficient airflow, and they should be able to dry entirely in less than four hours. Before bringing your plants back home, ensure sure they are entirely dry if they are in a globe or terrarium.
You will observe how open and wide the leaves are after soaking your plants, as well as how much more “happy” they seem. A well hydrated air plant should appear like this! You’ll learn over time that if the color starts to look a little dull and the leaves start to close or curl, your tillandsia are thirsty and you should give them another nice wash. Try soaking your air plant for several hours or even overnight if it is really struggling to see if you can rehydrate the plant. Always allow them to totally dry off before soaking or spraying them once more.
Between waterings, you can spray the plants. If you live in a dry region, this might be a terrific method to keep plants healthy and offer them some additional care. However, unless you have one of the few species of air plants that appreciate low moisture, such as T. tectorum (for which we only advocate misting) or T. xerographica, misting is not a replacement for a thorough soak (which we recommend dunking instead of soaking).
When it comes to water, air plants aren’t particularly finicky; most tap water is suitable, although it depends on the water quality in your location. The most nutrient-rich types of water to utilize are rainwater, aquarium water, or pond water. If utilizing one of these types of water, don’t add any more fertilizer. Allow the water to rest for several hours to allow the chlorine to dissolve if you’re using tap water (maybe 24 hours in some areas.)
Use water that is not distilled since it is too “pure” and will deprive the plants of the nutrients they require. Additionally, artificially softened water should not be used since Tillandsia cannot tolerate its high salt concentration.
We advise soaking your air plants in the morning so that they can dry completely over the day. Additionally, air plants utilize the nighttime hours to breathe carbon dioxide, so if they are wet in the evenings, they won’t be able to do so effectively. This method is known as CAM; to learn more about CAM, read our page on how air plants breathe. You can check on them before you go to night and place them back in their terrariums or displays. Some indirect sunlight will help them dry more rapidly.
These are the queries about watering air plants that we encounter the most frequently. Did we respond to yours? If not, just inquire! Need advice on caring for air plants? Visit our page on air plant care.
comments
Regarding watering the plants with blooms, I have a query. How do you water them if, as I understand it, you don’t moisten the bottoms or the blooms? Do you bring all of your indoor air plants inside during the winter? Although it doesn’t get very cold very often where I reside in Largo, Florida, it does occasionally. Since we don’t have snow, I believe the wind to be the main issue with the cold. Please lend me any assistance you can.
I recently purchased an aquarium, and in order to ensure that my three air plants receive continuous moisture in the office, I planned to tie them to a branch and let them sit on top of the tank. Do I still need to sprinkle and soak them as usual if the water that has evaporated from the tank should be plenty for them to receive?
Our well water passes through a water softener, which I should have mentioned in my previous query. They would be set up here if they could just survive on smoke.
Since we live in north-eastern Washington, rain has not been an option for us. Instead, we use well water, which I won’t even drink. I use spring water to water my air plants because I purchase it and drink it. I haven’t had them long, but they seem to be doing fine. Is using spring water for irrigation problematic?
Due to hydration issues, I do not advise attaching air plants to driftwood. In retrospect, it sounds apparent, but I was new to air plants and lost five of my six because the wood kept too much water when I first gave them a soak.