How To Tell If Air Plant Is Alive

The leaves of a healthy air plant should range in colour from green to grey. The plant should not break when you lift it up. In other words, leaves should not fall from an air plant that is healthy.

You can do a variety of things to resuscitate a plant. Here are the steps I take to aid in the recovery of my air plants’ health.

Give the Air Plant an Overnight Soak

When I’m trying to revive an air plant, I always start by watering it. Keep in mind that although air plants don’t need soil, that doesn’t imply they don’t need water. Water is a necessity for all living things, even air plants.

Since air plants don’t have roots, they must instead collect moisture and water through their leaves because they lack soil. I’ve heard it much too often that garden centres advise misting air plants with water a few times per week. This is not enough water, in my opinion, and the plant will become thirsty. Sadly, if this persists for a long enough period of time, the air plant will die.

How Long Should I Soak my Air Plant?

I give my air plants an hour-long bath to make sure they receive the water they need. I do this on a weekly basis during the summer when it’s warmer and roughly every three weeks throughout the winter. I enjoy using rainwater because I live in a rainforest. But you can also use regular tap water! To let the chlorine vaporise, simply leave the water out for 24 hours.

Simply take the air plant out of its current container and place it in a bowl of water after that. The basin needs to be big enough for the plant to fully submerge. After a half-hour or so, remove it from the bath. To make sure that water isn’t gathering in your air plant’s leaves while it’s upside down, give it a couple gentle shakes. After that, return the plant to its location. It’s that simple!

Make Sure Your Air Plant has Air!

Even though it might seem simple, your air plant requires oxygen to survive. There are numerous pictures of air plants being kept in tightly sealed jars floating about, and they make me scoff since plants cannot survive in that kind of environment!

The answer is simple.

You can continue to preserve your adorable jar terrarium, but be careful to keep the lid slightly ajar or open to allow air to flow freely.

Remove Dead Leaves

A sick air plant should also have any dead leaves removed by gently tugging on them to check if they fall off. They are dead if they are simple to remove. Unfortunately, you have a dead air plant that has already perished if the entire plant crumbles when you do this.

Your air plant will survive, though, if only a few leaves fall off and the interior leaves are green and healthy-looking.

Look at the Tips of Your Air Plant

Try using rainwater or unchlorinated water as mentioned above if the tips of your air plant are starting to turn brown. Your plant may not be getting enough water if you are not giving them chlorine yet they are still turning brown.

After giving them an overnight bath, make sure you give them baths more frequently.

What if my Air Plant Falls Apart?

You have a dead air plant on your hands if your green air plant just falls apart. This probably happened as a result of spending too much time in water that was left standing or from not adequately shaking off after a bath.

Reread the section about watering, and the next one will undoubtedly go more smoothly.

How can you determine the health of an air plant?

Unique and hassle-free indoor plants, air plants (Tillandsia) add significant visual charm to your home. These unique plants come in a variety of sizes, have health benefits for your home during the photosynthesis process, and need very little upkeep from you, which appeals to busy professionals. How can you know whether your air plant is healthy considering that they require less maintenance than other plants?

Hydration of the plant is essential to avoid underwatering and determine the health of your air plant. To determine whether the plant is getting too much or not enough moisture, regularly look for discoloured leaves or dry or wet rot. An air plant is in good health if it blooms and produces fluff.

There are numerous techniques to determine whether your air plant is healthy, and the majority of them only require a visual examination. They could quickly get ill by doing some unexpected activities. Continue reading to learn more about 11 quick ways to assess the general health of your air plant.

Am I able to revive my air plant?

What is it about Tillandsia air plants that is so fascinating? Because they are epiphytic plants, unlike the majority of other plants, air plants can survive without soil. They instead use their leaves to absorb moisture and nutrients. Despite the fact that air plants require little maintenance, they occasionally start to look ill and become limp, discoloured, or droopy. In this state, can an air plant be revived? Yes, assuming the plant is still alive. Continue reading to find out how to revive a Tillandsia.

How can a dead air plant be revived?

Most people will at some point in their adventure of cultivating tillandsias wonder how to revive their air plants. Finding the source of the problem is the first step in saving any air plant. After that, you can take the necessary steps to address the issue that is harming your air plant.

Your air plant may occasionally start to seem very white or grey. A naturally green air plant that is going very white or grey could be an early symptom of your air plant drying, even though it is typical for your air plants to be covered in a coat of white or grey hair or trichromes in most circumstances.

When your air plant becomes extremely white or grey, the good news is that it is not dying. When the air plant is dehydrated, the trichromes are simply becoming more noticeable and making the plant appear paler than usual.

A dry air plant can be brought back to life by soaking in water for 5-8 hours. After soaking, shake out any excess water, and let your air plant to dry out in 4 hours. Up until the plant no longer appears dry, repeat the prolonged soaking every two to three days.

If your air plant is drying out again after being rejuvenated with a series of prolonged soaks, check the light, temperature, and humidity conditions of the immediate area.

To assist your air plant maintain moisture, place it away from direct or extremely bright indirect light. Around 5090 F is the ideal temperature for air plants. If you subject your air plant to severely cold or hot temperatures, it could be difficult to recover it. It’s possible for the air plant to become too dry to survive in extreme temperatures.

The air plant’s brown or black leaves are often an indication of root decay. When air plants are not completely dried off after watering, they might get root rot. The air plant is susceptible to fungus infections that permanently harm the plant cells when the leaves are frequently wet. The air plant would eventually turn brown or black as a result of these dead cells.

As soon as you notice the brown or black leaves, you can carefully remove those leaves to revitalise your air plant and stop the infection from spreading. To prevent root rot, keep the air plant in a place with sufficient airflow and allow it to dry out promptly after each watering.

The air plant may perish in severe cases of root rot that have reached the plant’s centre. You will need to try again with a fresh plant if the root rot is so severe that the plant begins to fall apart.

It can take some trial and error to understand how to grow air plants. The most frequent explanation for “why is my air plant dying” is root rot as a result of the air plant not drying out correctly. Air plants might wither from dryness, lack of light, or lack of nutrients in the water.

To lessen the likelihood of root rot in the future, you might try several techniques and situate your air plant somewhere with more air movement.

How can I tell if my air plant is starting to rot?

Your air plant seemed great a few days ago. After watering it as usual, it’s now in utter disrepair after just a few days! What is going on?

Sorry to report, but damp rot may have already done damage to your little air plant. Maybe you neglected to shake the extra water off the leaves before placing them back in their spot, or you kept your plants in their bath for a little bit too long. Whatever it was, water found its way into the spaces between your plant’s leaves and base and eventually rotted it. In addition, your air plant may have dry rot, which happens when there is inadequate ventilation and the plant becomes ill. Most often, excessive watering and prolonged wet/damp periods allow fungus and harmful bacteria to establish a foothold and harm the plant.

Your air plant may have rot or fungus if the base is brown and too squishy or mushy to the touch. A decaying air plant frequently loses leaves at its base, may begin to crumble, or may even have the centre of the plant come out. It might be difficult to detect inner rot because it usually doesn’t manifest itself until the plant suddenly collapses, usually starting with the interior leaves.

A few air plants, such as the melanocrater tricolour, will naturally have darker bases. Additionally, good air plants may occasionally shed a few leaves. **

The outer leaves can also develop leaf rot and other fungal problems, which are much more obvious than the inner leaves. Dark stains at the plant’s base may be the first indication of this, and they will spread over time. In this situation, it is recommended to try to remove the damaged leaves from the base of the plant in an effort to rescue the plant and halt the development of the fungus/rot.

Below are some images of a T. stricta that has some leaf damage and may have a fungus problem. There is a dark circular portion of the leaf that doesn’t appear normal, despite the fact that it’s typical for some of the leaves at the base of an air plant (Tillandsia) to dry out, become brown, and die off. In order to assist stop the spread of any potential fungus, we carefully plucked a few of the leaves near the plant’s base in this instance. The plant has been cleaned up and the damaged leaves have been removed in the image on the right. It’s acceptable if the base’s very tip shows some browning or appears callused because here is where the stem’s base will develop roots.

There are a few easy techniques to prevent rot:

  • Maintain a watering schedule and watch out for overwatering. To avoid overwatering, keep in mind that Tillandsia vary from many typical house plants in that they absorb moisture through their leaves and trichomes rather than their roots.
  • Never submerge an air plant in water for an extended period of time.
  • According to the type of Tillandsia (air plant) you have, adjust your care and watering schedule. When compared to Mesic green-leaved kinds, silver-leaved cultivars—which are Xeric—need different amounts of water and even require different watering techniques. Check read this post about Xeric and Mesic air plants to find out more about the many varieties of air plants. Visit our article on Air Plant Care for information on general maintenance.
  • Once you’ve watered your air plant, be sure to shake off any extra water, and then wait until the plant is totally dry before reintroducing it to your terrarium, shell, or other display container. Avoid misting air plants within their terrariums or placing them near wetness.
  • Pay great attention to air plants with bulbous shapes and those with deep pockets at the base of their leaves since they may be more likely to retain water in their base.
  • Airflow is crucial! Never put your air plant in a container or terrarium that is completely sealed off. Leave the lid off of your terrarium if it has one. To thrive, air plants require adequate air flow; otherwise, rot might develop.
  • If any external leaves are starting to rot or exhibit indications of fungus, remove them at the base. If the plant has inner rot, removing the inner leaves won’t help and probably will do more harm than good.

Rot is unfortunately one of the things that, once it starts, is difficult to stop and save the plant from. Preventing decay is the greatest cure! As a natural fungicide, cinnamon has been shown to help minimise or stop rot/fungus on plant bases, so it might be worth a try! We also advise removing those leaves as previously shown if only a few of the outer leaves are impacted.

comments

fantastic article I can’t believe I let a lovely xerographica go to waste recently. Additionally, I spotted clumps of odd-colored fragments of a sticky gel-like substance.

I tried cleaning it, but it made no difference. A other plant with pockets and a bulbous shape experienced this. They resembled rounder balls; could they perhaps be eggs?

When submerged in water, an aeroplane that has rot spreads the rot spores to all the others. I experienced it. In the following few months, I lost 35 plants.

They are daily sprayed well, gently shook, and then placed back on the wall; there are no longer any communal baths. I lost my Tectorum and it mineralized in spring water.

I appreciate you teaching me how to care for my air plants. I need all the assistance I can get because I’m new at this.

Please describe the procedure and recommended frequency for applying cinnamon to plants.