Your air plant will require routine watering. It’s a common fallacy that these plants can survive indoors or in gardens without irrigation. Water is essential unless your airplants are growing outside in a climate that closely resembles their natural home. There are several fundamental rules one may abide by to keep their Tillandsia happy, even though your particular environment and the species being grown have an impact on watering.
For indoor cultivation, we advise immersing your airplant for 6–12 hours once every 7–10 days. Make sure there are no soap or chemical residues in your soaking container that could harm your plant. Make sure your plant thoroughly dries in 4 hours after soaking. Place the plant in a well-lit area with good airflow, and be sure to shake off any extra water by turning the plant upside down. A little spritz from a water bottle or the steam from your shower is unlikely to satisfy your Tillandsia’s water needs for very long due to the dry air brought on by air conditioning and heat.
The following water qualities are preferred by tillandsia:
1) Rain
2) Refined
3) Allow tap water to stand for 15 minutes (for chlorine to dissipate)
4) Never use distilled water since it depletes nutrients through osmosis, which can kill your plant.
The amount of outside watering depends on your climate. While no irrigation may be needed in a damp, rainy environment, regular watering through spraying or soaking may be necessary in hot, dry conditions.
How frequently do I need to water my air plant?
For the best care, your plants should be watered 2-3 times each week in addition to once every week. Every 2-3 weeks, a 2-hour bath should be taken. You will need to water or mist your plants more frequently if you live in a hotter, drier region. Your plant’s leaves will start to feel heavier and more wet after watering, and they will be softer and lighter in color when they require more water. Dehydration may be indicated by leaves that are wrinkled or rolled.
Where should air plants be placed?
All air plants are native to tropical regions where freezing temperatures never occur. It’s crucial to keep them at a reasonable temperature without a sweater, right? typically from the 1960s or earlier. Keep them away from windows that are cold in the winter and air conditioner vents.
At least a few hours of bright, indirect sun each day are necessary for air plants to thrive. The optimal placement is between one and three feet from an east or west-facing window, or around two feet from a source of artificial light. They can be exposed to hotter, more direct sun for longer periods of time if you maintain them well-hydrated. Avoid areas that are poorly lit.
How can I keep my air plant in good health?
Under-watering is the main reason why air plants die in new owners’ care. The overwatering that follows is a close second. According to a longstanding myth, these plants draw all the water they need from the atmosphere and don’t even need to be watered at all. While living in a climate similar to the Tillandsia’s natural environment and having them outside, this may be true, for the rest of us, watering is necessary. No need to worry; your plants will thrive if you follow these easy watering instructions. Pick one of the techniques listed below to water your plants like a pro.
The easiest approach to keep your air plant happy, particularly indoors, is to submerge it. People are frequently shocked to learn that you can completely submerge an aerial plant, but they adore it nonetheless! The only effective method for completely rehydrating your air plant is this. When water enters the plant’s root through the entire leaf surface, a stunning metamorphosis occurs. Curly leaves will frequently straighten, and although your Tillandsia won’t have meaty leaves like succulents, there will be a distinct fullness after soaking.
THE AMOUNT A dry tillandsia can benefit greatly from even a brief 30-minute bath, although they are capable of holding their breath for up to 12–24 hours. Our general rule is to soak for 6–12 hours once every week. Ours normally soaks for 12 hours or so. Even without losing too many of them, we’ve occasionally forgotten about them. Some xeric species, such as Tectorum and Xerographica, should be handled with caution. Since they are more delicate, they favor spraying.
Another method of watering your air plant is to spray it until it is completely saturated. It’s important to keep in mind that this isn’t a light sprinkling. For optimal watering, your plant needs to be totally submerged. While spraying your air plant is a good technique to hydrate it, you’ll need to do it much more frequently than soaking, which results in a more thorough rehydration.
THE AMOUNT 2-3 times each week, spray until completely saturated. This will be greater if you reside in Arizona and less if you reside in Hawaii. Whether your plant is indoors or outdoors, as well as the type of light it receives, are the two most crucial aspects to consider when deciding when and how much water to apply. More water will be appreciated if there is a lot of sun. Regular watering is essential indoors, where there is heat, air conditioning, and generally dry circumstances.
Watch the leaves of your plants to see if they are showing signs of thirst. A healthy white fuzz really indicates that your plant is healthy and not necessarily drying out because curly leaves are drier. Other indicators that you are under-watering include brown leaf tips and a generally withered appearance. Watch how your plant appears after a thorough soak. What is that like right now? Because every plant is unique, pay attention to what yours is now telling you.
Choosing your water
I’ll admit that for a long time, my air plants consumed more expensive water than I did. While my collection grew, I would tirelessly transport containers of purified water for them to enjoy. Tillandsia are accustomed to rainwater that has a pH balance and the ideal ratio of nutrients. The perfect balance is provided by well-filtered water, and I would even conduct my own PH testing to make sure the water was properly balanced between acidic and alkaline.
Tap water frequently contains high levels of chlorine and elements like calcium that can clog the delicate leaves of air plants. Interestingly, distilled water kills air plants by removing all of their nutrients through osmosis. Reverse osmosis systems are frequently used by nursery producers to guarantee that their plants receive the best water and produce the greatest outcomes.
But after many years and painful arms, I decided that my plants needed to become more resilient because I can no longer stand it. I turned on the hose and haven’t turned around since. However, I always make sure to take all of my tillandsia outside when it rains so they can take a lovely, refreshing shower. For similar advantages, you can utilize spring water or pond water.
Tip: Tap water’s chlorine levels drop after about 15 minutes. Before adding your air plants, try filling your soaking bin with water and waiting for this to happen.
How Much Light Does an Air Plant Need?
Air plants require strong, indirect light to grow. Good possibilities are rooms with windows that face the south or east because the sun will shine brightly in these areas for the majority of the day. As long as the plant is put close to the window and the window is not covered by trees or an adjacent apartment building, rooms with North-facing windows also perform effectively. Western light typically arrives later in the day and has a tendency to be quite warm and powerful. Take care not to burn your air plant!
The air plant will generally withstand more light as the humidity level in your area increases. This means that you should plan to spritz your air plant more frequently, such as twice a week or even every day, if you’re placing it where it will get a lot of light. An air plant will thrive in a bright bathroom or bustling kitchen since the humidity from your shower or boiling water will take care of the majority of plant misting for you.
Air Plants and Artificial Light
A lot of customers ask us if they can put their air plant in a basement or office where there won’t be any windows for natural light. The answer is yes, but there are a few particular guidelines to follow to guarantee the success of your plant.
Fluorescent light must be full-spectrum. These plants can’t photosynthesize in the kind of light that regular incandescent bulbs produce. Place your Tillandsia no more than three feet from the source of light. Additionally, if you plan to use fluorescent lighting, the plants will require at least 12 hours every day.
We advise purchasing a dedicated bulb for your plant (such as a Gro-Lux, Repta-Sun, or Vita-Lite) and setting it on a 12-hour timer if you live in a basement or wish to keep an air plant in your office to ensure that it receives the proper amount of light to survive.
Sand, rocks, and dried wood arranged in a shallow dish make a wonderful air plant display.
How can I determine the health of my air plant?
Unique and hassle-free indoor plants, air plants (Tillandsia) add significant visual charm to your home. These unique plants come in a variety of sizes, have health benefits for your home during the photosynthesis process, and need very little upkeep from you, which appeals to busy professionals. How can you know whether your air plant is healthy considering that they require less maintenance than other plants?
Hydration of the plant is essential to avoid underwatering and determine the health of your air plant. To determine whether the plant is getting too much or not enough moisture, regularly look for discolored leaves or dry or wet rot. An air plant is in good health if it blooms and produces fluff.
There are numerous techniques to determine whether your air plant is healthy, and the majority of them only require a visual examination. They could quickly get ill by doing some unexpected activities. Continue reading to learn more about 11 quick ways to assess the general health of your air plant.
How long does an air plant live?
Perennial plants are tillandsias, also referred to as air plants. According to the source, they have a lifespan of between two and five years, which indicates that they normally survive longer than two years.
The type of air plant and the growing conditions have an impact on how long they live, though. They reside in deserts, on various surfaces, and on tree branches in their natural habitat (other surfaces they can grow on).
Air plants only experience one flowering during their existence, which marks the culmination of their development and maturity.
Depending on the species, the flowers might remain in bloom for a number of months. However, the air plant will begin to die when the blossoms start to wilt and fade. Air plants develop pups or offsets before they die to carry on the same growth cycle.
Despite the mother plant dying, you can take the pups out and raise them separately. Separating the pups from the mother is referred to as “division is a method of air plant propagation.
As an alternative, you might leave those puppies grouped together ” (also known as “tillandsia balls).
How come my air plant is dying?
More air plants perish from overwatering than from underwatering. The telltale indicator is when the bottom of your air plant appears brown and slimy. Instead of submerging or soaking your air plants, try misting them with a spray bottle. In between waterings, make sure your air plant has completely dried out. Only mist your air plants 1-3 times each week. Less can be more. It’s crucial to dry your air plant within four hours because they can become overwatered if they don’t. Get a fan for your air plant if it doesn’t dry after four hours of watering, and water it less the following time.
2. Insufficient air causes air plants to lack nutrients. It results in “dry rot.” There won’t be enough food if there isn’t enough air movement around air plants. Keep in mind that air plants consume nourishment. Terrariums and small, quiet locations like toilets shouldn’t be used to house air plants because there isn’t enough airflow in these areas. Instead, pick a place with lots of natural light and fresh air, such as close to an open window, in a large room with other rooms adjacent to it, in a courtyard or on a veranda. Lack of air flow can also lead to overwatering because it delays the air plants’ ability to fully dry up. The problem with air plant holders is dry rot. Your air plant may develop dry rot on the area of the plant that has poor air flow from the planter if the base is placed in a planter, such as a pot, hanger, or pouch, that has no ventilation. Before you notice the rot, it will have spread and your air plant will be dead.
3. Lack of Light – To produce their own nourishment, air plants require light. If your air plants are indoors, make sure they are one meter or less from a window. They’ll definitely perish from lack of sunshine if you put them in a dark hallway.
4. Too much direct sunlight will burn your plant or severely dry the foliage. Generally speaking, 45 minutes of moderate early morning or late afternoon direct sunshine is acceptable. However, it is advised to use filtered sunlight or total shade.
5. Frost – Because they are sensitive to the cold, air plants. They dislike temperatures below 0 degrees Celsius. If you live in a chilly climate, you might want to think about bringing your air plants inside during the winter.
6. Humidity – some types of air plants like it when the humidity is high. If the leaves of your air plant are too curled, the air may be too dry for the plant. Spraying or soaking air plants in water just isn’t enough moisture if the air is too dry. Consider soaking your air plant for 30 minutes each week in addition to your regular spraying if you believe it died from low humidity. or daily spray your plant. Additionally, you can put the air plant on a piece of driftwood or any object that can hold moisture. Another choice is to make a bed using a mixture of 50% perlite and 50% orchid potting mix. Spray the mixture every time you spray your plants. Your air plants might even drop roots into the mixture since they are so content.
7. Rust – Your air plant will develop dead areas as a result. Keep your plant away from anything that is rusty. Regular wire might rust in the future. For mounting air plants, use plastic-coated or galvanized wire.
8. Copper wire is well recognized for killing air plants. Copper is poisonous to air plants, particularly when it is regularly moist.
9. It’s typical for the mother air plant to pass away. Air plants develop, blossom, give birth to pups, and then go extinct. If your air plant has already bloomed and produced pups, it’s entirely possible that she is about to die. Don’t get rid of her just yet. Before she leaves, she might surprise you by bearing even another pup.
A dead air plant you purchased from us? Give air plants another go with this 20% off coupon. To receive 20% off your upcoming order of air plants, use the promo code AIRDEAD at checkout.