The leaves of a healthy air plant should be green to gray in color. The plant should stay intact when you lift it up. In other words, leaves should not fall from a healthy air plant.
There are various methods for reviving a plant. Here are the steps I take to restore the health of my air plants.
Give the Air Plant an Overnight Soak
When I’m trying to revive an air plant, the first thing I do is water it. Remember that just because air plants don’t need soil doesn’t imply they don’t need water. Water is vital to air plants, just as it is to all other living things!
Because air plants lack a root system, they must absorb moisture and that all-important water through their leaves rather than through their roots. I’ve heard too many times from garden centers that spritzing air plants with water a few times a week is a good idea. This, in my opinion, is insufficient water and will leave the plant thirsty. Unfortunately, if this continues for long enough, the air plant will die!
How Long Should I Soak my Air Plant?
I give my air plants an hour-long bath to ensure that they get enough water. I do this weekly throughout the summer and every three weeks or so during the winter. Because I live in the rainforest, I prefer to collect rainwater. However, you can also use tap water! To allow the chlorine to evaporate, simply leave the water out for 24 hours.
After that, just remove the air plant from its container and place it in a bowl of water. The bowl should be large enough for the plant to completely submerge. Leave it in the bath for about an hour before removing it. To make sure the water isn’t accumulating in your air plant’s leaves, gently shake it upside down. After that, return the plant to its original location. It’s that simple!
Make Sure Your Air Plant has Air!
Although it may seem self-evident, your air plant requires oxygen to survive. There are a lot of pictures moving around of air plants in a sealed container that make me laugh Because the plant can’t thrive in that kind of environment!
The solution is simple: keep your adorable jar terrarium, but leave the lid cracked or open to allow air to move freely.
Remove Dead Leaves
Remove any dead leaves from a sick air plant by gently tugging at them and seeing whether they fall off. They’re dead if they’re easy to remove. If the entire plant falls apart as a result of this, you’ve got a dead air plant that has regrettably died.
If only a few leaves fall off and the internal leaves are still green and healthy, your air plant will survive with appropriate care!
Look at the Tips of Your Air Plant
If your air plant’s tips are going brown, use rainfall or unchlorinated water as indicated above. If your plants are becoming brown despite not receiving chlorine, they may not be getting enough water.
After an overnight bath, make sure you’re bathing them more frequently.
What if my Air Plant Falls Apart?
You’ve got a dead air plant on your hands if your green air plant starts to fall apart. This most likely happened because you sat in standing water for too long, or you didn’t shake it off correctly after bathing.
Reread the section about watering, and you’ll have a much easier time with the next one!
How do I revive my air plant?
How can I revive my air plant is a common concern that most people have at some point during their tillandsia growing adventure. The first step in revitalizing any air plant is to figure out what’s causing the problem. Then you can take the necessary steps to address the issue that is causing your air plant to die.
It’s possible that your air plant will turn quite white or gray at times. While a covering of white or gray hair or trichromes on your air plants is typical in most situations, a naturally green air plant that is going excessively white or gray could be an early symptom of your air plant drying.
The good news is that if your air plant becomes very white or gray, it is not dying. When the air plant lacks water, the trichromes simply become more apparent, causing the plant to appear paler than usual.
A dry air plant can be revived by immersing it in water for 5-8 hours. After the soak, shake off any excess water and allow your air plant to dry within 4 hours of watering. Rep the long soaking every 2-3 days until the plant no longer seems to be dry.
If your air plant is drying up again after being rejuvenated with a series of extended soakings, check the light, temperature, and humidity levels of the surrounding environment.
To assist your air plant maintain moisture, keep it away from direct or very bright indirect light. Air plants enjoy temperatures between 50 and 90 degrees Fahrenheit. If you expose your air plant to severely cold or hot temperatures, it may be difficult to revive it. Extreme temperatures can dehydrate the air plant to the point where it can no longer thrive.
Root rot is usually indicated by brown or black leaves on the air plant. When air plants are not thoroughly dried out after watering, they might get root rot. When the air plant’s leaves are persistently damp, fungal infections can develop, causing lasting damage to the plant’s cells. The air plant would eventually turn brown or black as a result of these dead cells.
You may resurrect your air plant by gently plucking the brown or black leaves as soon as you notice them to prevent the infection from spreading. To avoid root rot, keep the air plant in a location with sufficient air circulation and allow it to dry quickly after each watering.
Severe occurrences of root rot that spread to the plant’s center can cause the air plant to die. If the root rot is severe enough that the plant begins to fall apart, you’ll need to start over with a new plant.
Growing air plants is a trial-and-error procedure that can take some time. While air plants might wither due to dryness, lack of light, or a lack of nutrients in the water, the most common cause of death is root rot, which is caused by the air plant not drying out correctly.
To avoid the risk of root rot in the future, try other approaches and situate your air plant somewhere with more air movement.
Can you save an air plant from rot?
A purplish/black hue creeping up from the base of the plant into the foliage is the first sign of a decaying air plant. The air plant will begin to come apart as well; the foliage will begin to fall off, and the plant’s heart may fall out.
If any of these symptoms appear, the answer to the question “is my air plant rotting?” is a loud yes. What can you do about it, is the question. Unfortunately, there isn’t much you can do if your air plant is dying. On the plus side, if the air plant rot is limited to the outer leaves, you may be able to salvage the plant by removing the infected leaves and adhering to a strict watering and drying routine.
Do air plants die easily?
Although there is no clear answer as to why any given air plant perished, here is a list of points to consider when considering the health and care of your tillandsias.
Over & Under Watering
An air pant can be killed by too much or too little water. It might be difficult to keep a plant hydrated at times. Soak your plant for 20-30 minutes, shake it off, then let it air dry for a few hours before repotting it. We’ve had the best luck making our weekly water baths a habit. The state of the leaves the day following a good soak is a decent rule of thumb. Curled or folded leaves should be avoided in favor of open, flat leaves. After each watering, aim for this look and adjust the frequency as needed so that your air plants look this way the majority of the time. Aeranthos Major is an excellent hydration indicator for air plants. Depending on the plant’s moisture, the leaves of this species coil and open drastically. In smaller species like Ionanthas, the distinction is more subtle.
When plants are not allowed to dry out fully for several days between water baths, they will die from over-watering. When the air plants are misted with water while inside a terrarium or enclosure, this happens frequently. The enclosure’s tightness retains moisture, which might cause rot at the plant’s root.
Exposure to Salts & Chemicals
Water softener salts may be good for our skin and hair, but they are bad for air plants. Have you ever had a house plant that developed a white crust on the top of the soil after a few waterings and allowing it to dry? These are salt deposits that are particularly detrimental to plants that live in the air. Because air plants don’t have soil to filter their salts, they wind up accumulating on the ends of their leaves. This will eventually suffocate the plant since the trichomes will be unable to absorb water and nutrients. Chlorine, which can be found in certain municipal water, is bad for plants and should be avoided if at all feasible.
Rain, well, pond, lake, or non-carbonated mineral water are the best options. Although free of hazardous salts, most minerals are removed from store-bought bottled and filtered water. Although bottled water will not hurt the plant, if it is the only source of water, it will deprive it of essential nutrients.
Extreme Heat and Light
Plants will dehydrate more quickly if they are exposed to direct sunshine. Sitting near to a hot window or in a hot room has the same effect. Direct sunlight can occasionally cause plant leaves to burn. Air plants should not be kept in glass enclosures with direct sunshine since the enclosures can become very hot (like a miniature greenhouse) and the glass can function as a magnifying glass, concentrating the sunlight on the leaves and causing them to burn quickly. Most air plants like temperatures that you prefer, as a general rule. If you wouldn’t sit near your window for several hours at a time because it’s too hot, your air plant is likely to dislike it as well. The majority of tillandsias like temperatures between 55 and 85 degrees Fahrenheit.
Several species of air plants, however, are adapted to extreme temperatures in their natural habitat. Xerographica, Harisii, and Stricta are all xeric plants that grow in hotter lowland climates. These species can thrive in hotter temperatures and brighter environments as long as they have access to water. In general, the hotter the weather gets, the more watering is required.
Too Little Light
Air plants require many hours of indirect natural light or intense artificial lighting every day. Air plants that are kept in dim restrooms or dark inner halls will soon wilt and perish. Because the lights are on for several hours each day, office settings usually provide adequate lighting. If you have enough light for other typical houseplants like potho vines, spider plants, and philodendrons, then tillandsias should thrive.
Cold
Although many types of air plants thrive natively at high heights, frost or freezing temperatures are extremely unusual. Most air plants are sensitive to frost and temperatures below 32 degrees Fahrenheit. Spanish moss and various forms of ball moss, which can be found naturally from Texas to Florida and up into coastal Virginia, are the principal exceptions to these guidelines. Spanish moss (Tillandsia usneoides) can survive nights in the teens and twenties Fahrenheit, as well as a few days a year when the temperature does not rise above freezing. This, on the other hand, would be a death sentence for most air plants, especially those that are commercially available.
We continue to give our 30-day guarantee for plants that arrive DOA due to the cold over the winter. We don’t utilize heat packs to ship the plants right now because they run out quickly and aren’t particularly effective near the conclusion of their life cycle, when they’re most needed. We’ve also discovered that they can actually burn the plants. When ordering plants in the winter, the best option is to have them delivered to wherever you are when mail is delivered (for example, your place of work or school) to limit their exposure to the cold.
If your air plants are exclusively outside during the summer, we recommend bringing them inside as the temperatures drop below 45 degrees. Indoors, any air plant will thrive. There are certain key winter care issues to evaluate during the winter months, especially at higher latitudes. Here’s a link to a different blog post about air plant winter care.
Fertilizer Burn
Higher fertilizer concentrations in the water and more frequent fertilizing may cause your air plants to burn. If you prefer to water by misting, you may want to include fertilizing in your routine as well. However, it is critical that you thoroughly combine and dilute the fertilizer before spraying the plants (at the same one-quarter teaspoon per gallon of water).
Moisture & Poor Air Circulation
Arid deserts and chilly, dry, and windy highlands are home to the majority of air plants. Some air plants, but not all, thrive in high humidity. After you’ve soaked your plants, make sure they dry quickly. When they’re drying, we prefer to place them in front of a ceiling fan. This will help to avoid wet bases, which are prone to root rot. We still recommend that you remove your plants out of their enclosures for watering, even if you mist or spritz them. Spanish moss should be hung in an open area with plenty of air. If placed flush against a wall or used as stuffing in a terrarium globe, it will eventually brown.
Their Natural Life Cycle
Nothing lasts forever, and air plants are no exception. Growth, blooming, and reproduction through pups and seedlings are all part of the life cycle of air plants. Although flowering is one of the high points in most air plants’ life, things do not always go worse after that. Smaller air plants, such as Ionanthas, have bloomed for us a number of times every year. The mother plant, on the other hand, will eventually devote the majority of her resources to producing little offsets. The offsets will be the same size as the mother by the time the mother plant has totally given up, and the cycle will resume. Some species appear to prefer producing pups before the mother plant has bloomed, therefore a pupping plant does not always imply that the mother plant’s bloom has been misted! When an air plant begins to produce offspring, you have two options: divide the young air plants or allow the air plants to organically clump together. For further information, see our blog on Dividing Air Plant Pups.
Why is my air plant drying out?
If your air plant died recently, it was most likely due to rot. It is the most common cause of death in Tillandsia plants. The main cause of this harmful problem is overwatering your plants. Air plants, like succulents, store water in their leaves, which can keep them alive for up to two weeks.
Will my air plant come back to life?
What is it about air plants (Tillandsia) that fascinates people so much? Air plants are epiphytic, which means that, unlike most other plants, they don’t need soil to survive. Instead, they use their leaves to absorb moisture and nutrients. Despite the fact that air plants require little care, they can become ill looking shriveled, weak, brown, or droopy. Is it possible to save an air plant in this state? Yes, as long as the plant isn’t too old. Continue reading to learn how to revive a Tillandsia.
Should I cut off brown leaf tips?
Is it necessary to remove dead leaves? Yes. Remove brown and dead leaves as quickly as possible from your houseplants, but only if they’re more than 50% damaged. By removing these leaves, the remaining healthy foliage receives more nutrition and the plant’s beauty improves.
How often should I soak my air plant?
On our Facebook page, we get a lot of queries on how to water air plants, so I wanted to elaborate a little. While Tillandsia (also known as air plants) are easier to care for than many other plant kinds, they do require some upkeep and TLC, and water plays an important role in their overall health. Here are some of the most common questions we hear about watering air plants, along with our answers:
This is mostly determined by your climate and where you keep the air plants, as well as the Tillandsia species (learn more about mesic vs. xeric air plants here) and the type of environment in which it grows in nature. We reside in Tampa, FL, so it’s very humid here for the majority of the year, and we don’t run the heat in our house during the winter like our friends up North (I’m not trying to rub it in!). We water our plants twice a week on average, but individuals who live in drier climes will need to water more frequently. Depending on the time of year, you may discover that you need to water your plants less. It also depends on where you keep them in your house or office. A humid bathroom will keep the plants moist, but those near an air vent or heat source will need to be watered more frequently. (Please note that keeping your plants near heat sources is not recommended.)
Note that, while humidity might slow the drying process, it is not a suitable watering method in and of itself!
Again, you’ll want to adapt your watering methods based on your climate and air plant species, but we recommend soaking your plants in water at least once a week for MOST air plants and settings. You can use anything that allows you to totally submerge the air plants, such as a bowl, bucket, or your sink. Soak them for 30-60 minutes at least once a week, and every other week if you live in a dry area, give them a longer soak for an hour or more. If you live in a humid environment or have a xeric air plant, you may want to cut the soak time in half.
After bathing, make sure the air plants are completely dry. Turn them over and softly shake them, or lay them out to dry with the leaves down. Allowing water to remain in the leaves can cause the plants to decay. The plants should be placed in an area with sufficient air circulation and should be able to dry entirely in 4 hours. If your plants are housed in a globe or terrarium, ensure sure they are thoroughly dry before bringing them back home!
You’ll notice how wide and open the leaves are after soaking them, and how much more “happy” they appear. This is how a properly hydrated air plant should seem! If the color turns slightly dull and the leaves begin to close/curl over time, this is an indication that your Tillandsia is thirsty, and you should give them another soak. If your air plant is in desperate need of water, soak it for several hours or overnight to see if you can rehydrate it. Before soaking or spraying them again, make sure they have a chance to dry thoroughly.
It’s also a good idea to spray the plants in between waterings. If you live in a dry area, this might be a terrific method to keep plants healthy and offer them some additional attention. Unless you have one of the few varieties of air plants that like low moisture, such as the T. tectorum (which we only propose misting) or the T. xerographica, misting is not a substitute for a proper soak (which we recommend dunking instead of soaking).
When it comes to water, air plants aren’t picky, and most tap water is good, but it all depends on the water quality in your location. Because these waters are more nutrient-dense, the best water to use is rain water, aquarium water, or pond water (note: if using one of these waters, don’t add any additional fertilizer). If you’re using tap water, let it out for a few hours to allow the chlorine to disperse (maybe 24 hours in some areas.)
Do not use distilled water because it is too “clean” for these plants and will deprive them of the nutrients they require. Also, avoid using artificially softened water because it contains too much salt for Tillandsia.
We recommend soaking your air plants in the morning to ensure that they dry completely throughout the day, as well as because air plants utilize the evening to breathe carbon dioxide and will be unable to do so if they are wet in the evenings.
This is known as CAM, and you can learn more about it in our page on how air plants breathe. You can check on them before going to bed and put them back in their terrariums or displays if you expose them to some indirect sunlight.
These are the most frequently asked questions about watering air plants. Did we respond to your question? If you’re not sure, just ask! Are you looking for more information on how to care for air plants? Visit our Air Plant Care page for more information.
How do you know when an air plant needs water?
Your plants should be watered once a week, but for best results, water them twice a week. Every 2-3 weeks, a 2-hour soak is advised. If you live in a drier, hotter environment, you’ll need to water or mist your plants more frequently. Your plant’s leaves will get stiffer and full of water after watering, and they will become softer and lighter in color when they are in need of water. Dehydration can be indicated by wrinkled or rolled leaves.