How To Properly Care For An Air Plant

Your air plant will require routine watering. It’s a common fallacy that these plants can survive indoors or in gardens without irrigation. Water is essential unless your airplants are growing outside in a climate that closely resembles their natural home. There are several fundamental rules one may abide by to keep their Tillandsia happy, even though your particular environment and the species being grown have an impact on watering.

For indoor cultivation, we advise immersing your airplant for 6–12 hours once every 7–10 days. Make sure there are no soap or chemical residues in your soaking container that could harm your plant. Make sure your plant thoroughly dries in 4 hours after soaking. Place the plant in a well-lit area with good airflow, and be sure to shake off any extra water by turning the plant upside down. A little spritz from a water bottle or the steam from your shower is unlikely to satisfy your Tillandsia’s water needs for very long due to the dry air brought on by air conditioning and heat.

The following water qualities are preferred by tillandsia:

1) Rain

2) Refined

3) Allow tap water to stand for 15 minutes (for chlorine to dissipate)

4) Never use distilled water since it depletes nutrients through osmosis, which can kill your plant.

The amount of outside watering depends on your climate. While no irrigation may be needed in a damp, rainy environment, regular watering through spraying or soaking may be necessary in hot, dry conditions.

How frequently should an air plant be watered?

For the best care, your plants should be watered 2-3 times each week in addition to once every week. Every 2-3 weeks, a 2-hour bath should be taken. You will need to water or mist your plants more frequently if you live in a hotter, drier region. Your plant’s leaves will start to feel heavier and more wet after watering, and they will be softer and lighter in color when they require more water. Dehydration may be indicated by leaves that are wrinkled or rolled.

Where should air plants be placed?

All air plants are native to tropical regions where freezing temperatures never occur. It’s crucial to keep them at a reasonable temperature without a sweater, right? typically from the 1960s or earlier. Keep them away from windows that are cold in the winter and air conditioner vents.

At least a few hours of bright, indirect sun each day are necessary for air plants to thrive. The optimal placement is between one and three feet from an east or west-facing window, or around two feet from a source of artificial light. They can be exposed to hotter, more direct sun for longer periods of time if you maintain them well-hydrated. Avoid areas that are poorly lit.

How can I keep my air plant in good health?

Under-watering is the main reason why air plants die in new owners’ care. The overwatering that follows is a close second. According to a longstanding myth, these plants draw all the water they need from the atmosphere and don’t even need to be watered at all. While living in a climate similar to the Tillandsia’s natural environment and having them outside, this may be true, for the rest of us, watering is necessary. No need to worry; your plants will thrive if you follow these easy watering instructions. Pick one of the techniques listed below to water your plants like a pro.

The easiest approach to keep your air plant happy, particularly indoors, is to submerge it. People are frequently shocked to learn that you can completely submerge an aerial plant, but they adore it nonetheless! The only effective method for completely rehydrating your air plant is this. When water enters the plant’s root through the entire leaf surface, a stunning metamorphosis occurs. Curly leaves will frequently straighten, and although your Tillandsia won’t have meaty leaves like succulents, there will be a distinct fullness after soaking.

THE AMOUNT A dry tillandsia can benefit greatly from even a brief 30-minute bath, although they are capable of holding their breath for up to 12–24 hours. Our general rule is to soak for 6–12 hours once every week. Ours normally soaks for 12 hours or so. Even without losing too many of them, we’ve occasionally forgotten about them. Some xeric species, such as Tectorum and Xerographica, should be handled with caution. Since they are more delicate, they favor spraying.

Another method of watering your air plant is to spray it until it is completely saturated. It’s important to keep in mind that this isn’t a light sprinkling. For optimal watering, your plant needs to be totally submerged. While spraying your air plant is a good technique to hydrate it, you’ll need to do it much more frequently than soaking, which results in a more thorough rehydration.

THE AMOUNT 2-3 times each week, spray until completely saturated. This will be greater if you reside in Arizona and less if you reside in Hawaii. Whether your plant is indoors or outdoors, as well as the type of light it receives, are the two most crucial aspects to consider when deciding when and how much water to apply. More water will be appreciated if there is a lot of sun. Regular watering is essential indoors, where there is heat, air conditioning, and generally dry circumstances.

Watch the leaves of your plants to see if they are showing signs of thirst. A healthy white fuzz really indicates that your plant is healthy and not necessarily drying out because curly leaves are drier. Other indicators that you are under-watering include brown leaf tips and a generally withered appearance. Watch how your plant appears after a thorough soak. What is that like right now? Because every plant is unique, pay attention to what yours is now telling you.

Choosing your water

I’ll admit that for a long time, my air plants consumed more expensive water than I did. While my collection grew, I would tirelessly transport containers of purified water for them to enjoy. Tillandsia are accustomed to rainwater that has a pH balance and the ideal ratio of nutrients. The perfect balance is provided by well-filtered water, and I would even conduct my own PH testing to make sure the water was properly balanced between acidic and alkaline.

Tap water frequently contains high levels of chlorine and elements like calcium that can clog the delicate leaves of air plants. Interestingly, distilled water kills air plants by removing all of their nutrients through osmosis. Reverse osmosis systems are frequently used by nursery producers to guarantee that their plants receive the best water and produce the greatest outcomes.

But after many years and painful arms, I decided that my plants needed to become more resilient because I can no longer stand it. I turned on the hose and haven’t turned around since. However, I always make sure to take all of my tillandsia outside when it rains so they can take a lovely, refreshing shower. For similar advantages, you can utilize spring water or pond water.

Tip: Tap water’s chlorine levels drop after about 15 minutes. Before adding your air plants, try filling your soaking bin with water and waiting for this to happen.

How frequently should an air plant be misted?

I frequently receive queries concerning caring for air plants that are kept in glass globes because they have become so popular. To enjoy your plant in a glass enclosure for many years, follow these few instructions. If you’re seeking for glass globes, our shop has a wide variety of unusual patterns.

  • The more attention you can provide your plant, the bigger the globe.
  • When you initially get your plant, give it a 20 to 30-minute bath. Keep an eye on the size and color to determine how content the plant is. Consider this “image” constantly.
  • Before inserting your plant into the globe, let it almost entirely dry out.
  • Every 4-5 days, mist your plant with one spray for small globes, two or three sprays for globes 3-5 inches in diameter, and more if the plant is in a wide open globe. The objective is to estimate the drying time; the longer the plant can retain moisture, the smaller the globe and less circulation. Overwatering will cause the plant to perish.
  • Do you recall how your plant seemed after soaking? If it no longer has that cheerful, healthy appearance, remove it, soak it for 30 to 60 minutes, shake, and let it almost completely dry before replacing in the globe.
  • Place your globes away from windows or other areas where they will receive direct sunlight. Keep in mind that the glass will make the heat and sunlight more intense. Some plants may even grow in low to moderate light, though indirect light is preferred.

Do my air plants need to be misted?

The final technique in our series on watering air plants is misting, which you can employ in between regular soaking or immersing. Read more in our earlier blog posts to learn more about the dunk method and soaking.

If you notice that your plant’s leaves are starting to seem a bit dry or if you live in a dry region with low air humidity, misting is an excellent approach to give it a little additional hydration. Misting is probably not enough water for your plant to grow, therefore you shouldn’t utilize this method as its only supply of water.

The T. tectorum, which has a lot of trichomes, is an exception to this rule and prefers misting to soaking or submerging. In a temperate area, you might only need to mist once a month with one of these guys, or once a week in a hotter environment.

In contrast to other plants with bigger leaves, plants with wispy leaves such the T. ionantha, T. andreana, or T. fuchsii v gracilis may require misting more regularly in addition to weekly watering.

  • It’s easy to spritz plants; just use a spray bottle or hose attachment set to the “mist” setting. Make sure the entire plant gets soaked before misting. As previously mentioned, if this is their sole source of water, this is not the greatest approach for watering. If you mist your plants, remember to additionally soak or dip them once a week at the very least.

A useful generalization to remember is that a healthy air plant will have leaves that are wide open, whereas a dehydrated air plant would have leaves that curl inward. Bring on the mist if you see that your plant is starting to appear a touch dry between your regular waterings!

Do you soak air plants with their tops up?

It is best to provide air plants with water that is rich in minerals and nutrients because they obtain many of their nutrients directly from the water. The best water is rainwater, although spring water is a close second if you don’t have a convenient way to collect rainwater. Alternatively, you might utilize well, lake, or creek water. Never use filtered or distilled water. Less minerals and nutrients are present in distilled and filtered water. Many municipal water systems include fewer minerals and nutrients and more contaminants. If you are concerned about your pH level, air plants enjoy slightly acidic water. The ideal range for alkalinity is between 5.5 and 6.0. Most frequently, tap water from the city is higher than this range, making it unsuitable for air plants. Do not worry yourself too much about PH levels. Any good, pure water would do.

After watering your air plants, thoroughly drying them off is the second most crucial step. To ensure that your air plants completely dry, put them down on a dish towel on their side or upside down. For the larger species like Xerographica, Streptophylla, and Sparkler, this is especially crucial. Within two hours of their bath, they should be completely dry to the touch. Wait until your air plants are completely dry before putting them back in terrariums and vases. If you water your plants and then put them in an enclosure right away, your plant can get rot. Your air plants will be content and healthy if you follow these straightforward watering guidelines.

How long does an air plant live?

Perennial plants are tillandsias, also referred to as air plants. According to the source, they have a lifespan of between two and five years, which indicates that they normally survive longer than two years.

The type of air plant and the growing conditions have an impact on how long they live, though. They reside in deserts, on various surfaces, and on tree branches in their natural habitat (other surfaces they can grow on).

Air plants only experience one flowering during their existence, which marks the culmination of their development and maturity.

Depending on the species, the flowers might remain in bloom for a number of months. However, the air plant will begin to die when the blossoms start to wilt and fade. Air plants develop pups or offsets before they die to carry on the same growth cycle.

Despite the mother plant dying, you can take the pups out and raise them separately. Separating the pups from the mother is referred to as “division is a method of air plant propagation.

As an alternative, you might leave those puppies grouped together ” (also known as “tillandsia balls).

Do air plants grow in size?

The most common queries that air plant owners and potential owners have about their plants are listed below. Please post any further questions you may have about air plants in the comment area below.

Do Air Plants Purify Air?

Air plants are less successful in air filtration than other plants, although they do remove carbon dioxide and some trace chemical pollutants. However, some research imply that they may be useful in clearing the air of pollutants like mercury.

Do Air Plants Grow Bigger?

Depending on the species, your air plant will reach its full size if it is a pup (baby air plant). As was previously mentioned, air plants may grow from two inches to seven feet tall, so do some research on the kind you choose to learn more about how big it will get. An air plant that you purchase at a market is probably fully developed.

Do Tillandsia Die After Flowering?

Unfortunately, most air plant kinds that bloom are elderly and will soon pass away. On the plus side, air plants produce tiny pups before they die that will eventually reach the size of their parents.

Why Do My Air Plants Keep Dying?

The most frequent factor that causes air plants to die is overwatering. They are very susceptible to root rot, which will destroy them, if they are overwatered. Make sure your air plants dry off within three hours of watering to prevent root rot. Underwatering is the second most typical reason, which the plant can generally overcome. See our suggestions below to rejuvenate a dry plant.

How Do You Revive an Air Plant?

Give your plant an extra bath and then continue your regular watering schedule if you notice that you’ve only slightly under-watered it (for example, if the tips of your plant are turning brown or feeling a little dry). The steps listed below can be used to revitalize a brown or very dry plant:

Place the plant and water container in a room with plenty of light and a temperature between 65 and 75 degrees Fahrenheit (1823C).

Repeat the procedure if the plant continues to wilt three days after being soaked, but this time soak it for just three to four hours.

Air plants are wonderful additions to your plant collection and can make wonderful presents for friends who also enjoy plants. Cute air plant jewelry can be made from the tiniest ones. Ingenious crafts like air plant string art and do-it-yourself terrariums may also be made using air plants. Have you thought of a unique way to use your air plant? Tell us in the comments section below!