Your plants might cross or self-pollinate, depending on the Tillandsia species you grow. The more likely scenario is that you will only experience flowering, followed by a batch of two to eight pups. These will have the same appearance as the mother plant but be smaller. Many species only have one bloom in their entire lifetimes, but you can take the pups and grow new plants from them.
It is safe to remove air plant pups when they are between one-third and one-half the size of the mother plant. To allow the puppies to develop into full-sized air plants, just divide them, water them, and locate them a new location.
You can leave the pups where they are and watch a cluster form if you’d want to keep them together. However, if your species only produces a single blossom, the mother plant will eventually pass away and must be removed.
Your air plant might not produce blossoms or young if it’s unhappy and not receiving the best growing circumstances. Make sure it receives enough of humidity and indirect light. Keep it warm, but keep heaters and vents away from it.
How are air plants reproduced?
The simplest approach to multiply your air plant is to pull off offsets, also known as pups, that emerge from the mother plant’s base. Following the plant’s blooming cycle, one to three puppies will emerge. You might choose to leave the pups on the mother plant to make an air plant cluster, depending on the aesthetic you’re looking for.
Step 1: Delay reproduction until each pup is at least one-third the size of the mother plant.
Step 2: Gently pull at the pup’s base while holding the mother plant. Be careful not to pull by the leaves as this could shatter the item. The youngster should simply and damage-free detach from the mother plant when it is ready to be left alone.
Step 3: After removing the puppies from the mother plant, soak them in water. Maintain them as usual and put them in an area with bright, indirect light.
Are air plants simple to grow from seed?
Around the world, there are more than 300 different types of air plants. They are regarded as epiphytes and are members of the bromeliad family. They were given the term because of their distinctive ability to develop in the atmosphere. The nutrients for the roots of air plants come from water and air, not soil, thus they may thrive without it.
Pups can be reproduced relatively easily. To reach the puppies at the base of the plant, you will need to peel back its leaves or chop them off. Before cutting the leaves, make sure to feel the spot where the plants meet to find the pups.
Can leaves be used to propagate air plants?
However, you cannot grow them from stem or leaf cuttings. In this respect, they differ from succulents, where you can grow new plants simply by re-rooting the supple leaves or robust stems in water or soil.
Can air plants produce offspring?
Let’s speak about having babies, namely air plant babies! Tillandsia, often known as air plants, are notoriously difficult to produce from seed, hence most Tillandsia nurseries prefer to grow air plants through propagation. In order to extend our supply of air plants and create some very robust Tillandsia specimens, we at Air Plant Design Studio rely on propagation.
This Tillandsia streptophylla pup, which we recently detached from a huge mother plant, is enormous and appears to be in good health.
An air plant will generate offsets once it has completed the blooming cycle, or “pups under ideal circumstances. The offsets develop differently depending on the Tillandsia species; some air plants produce pups near the base or root system, while others sprout them from beneath one of, but this air plant really acts as protection for the young Tillandsia pup that has sprouted beneath it.
Following blooming, air plants often produce 1 to 3 pups. Many, many more can be produced by some types.
Puppies being separated from the mother plant:
When offsets have grown to a size that is roughly one-third that of the mother plant, you can carefully remove them. With the right conditions and care, the pup will then proceed through its own lifespan, developing into a larger animal that eventually blooms and gives birth to its own offsets. While holding the mother plant, carefully pull on the pup’s base to remove it. If you must use excessive force to separate an offset that is ready to be removed, we advise leaving it intact. This offset should be able to be removed without harming mother or child.
clump formation in air plants:
The offsets will continue to develop as a mother air plant if not separated from it “It is possible for clumps to become quite spectacular. The formation will be somewhat influenced by how you keep them; for instance, by hanging clumping ionantha air plants, the pups will be given room to grow in all directions and should eventually form a spherical clump. These air plant clumps can create several blooms under the correct circumstances as the individual pups develop through maturity, bloom, and continue to produce their own pups.
promoting pup development
In most cases, air plants produce pups or offsets after blooming. At some time in their life cycle, every Tillandsia will go through this process, however certain species, like the xerographica air plant, bloom and produce pups much more slowly. Tillandsia need a lot of water, air flow, light (your air plant’s preferred level and intensity will vary according on type), and light in order to bloom and generate offsets. To hasten flowering and pup production, you can also use a fertilizer made specifically for Tillandsia (like this one), but bear in mind that fertilizer can only be used sparingly and should not take the place of adequate care or circumstances.
In our articles on the air plant blooming process and what happens after the bloom, you may find out what happens before an air plant produces pups.
How long does an air plant live?
Perennial plants are tillandsias, also referred to as air plants. According to the source, they have a lifespan of between two and five years, which indicates that they normally survive longer than two years.
The type of air plant and the growing conditions have an impact on how long they live, though. They reside in deserts, on various surfaces, and on tree branches in their natural habitat (other surfaces they can grow on).
Air plants only experience one flowering during their existence, which marks the culmination of their development and maturity.
Depending on the species, the flowers might remain in bloom for a number of months. However, the air plant will begin to die when the blossoms start to wilt and fade. Air plants develop pups or offsets before they die to carry on the same growth cycle.
Despite the mother plant dying, you can take the pups out and raise them separately. Separating the pups from the mother is referred to as “division is a method of air plant propagation.
As an alternative, you might leave those puppies grouped together ” (also known as “tillandsia balls).
How are air plant pups raised?
Try to be patient and caring with your air plants because they tend to develop quite slowly at first. Over time, you’ll discover that they are incredibly tolerant plants that benefit from just a few simple instructions.
- glaring indirect lighting
- Every once or twice a week, immerse the entire plant for 5–10 minutes in room temperature water. After a bath, let plants to dry for at least three hours by hanging them upside-down on a towel.
- For better blooms and the growth of your daughters, fertilize every two months with an epiphytic, bromeliad, or non-urea nitrogen fertilizer (pups).
Origins
Tillandsias are a member of the broad bromeliad family. Southern North America, as well as temperate regions of Central and South America, are the natural habitats of the Tillandsia genus. According to
The plant species may grow in arid to tropical environments like mountains, deserts, and rain forests. The thick-leafed types are found in dry places, while the thinner-leafed varieties grow there.
in regions where drought is more likely. This is a crucial factor to take into account when purchasing an air plant because it will define the plant’s hardiness and the precise watering requirements.
What is an Epiphyte?
We adore the fact that air plants are epiphytes since they are totally unique and adaptable! The mosses, orchids, bromeliads, and Spanish moss are a few well-known examples (which is also of the genus Tillandsia.) The term “epiphyte” simply describes a plant that grows without soil and acquires its nutrition by attaching to another plant or structure without the use of parasites. They will develop roots in order to tie themselves to something, but they are merely there for stability and support. If the roots of your plants start to go out of control, you may always cut them back with a pair of scissors without harming the plant. An air plant is a distinctive and eye-catching feature in the home because of its capacity to simply “hang out,” which opens up countless design possibilities.
Basic Care
Tillandsias grow on trees and telephone lines in the wild, where they are slightly shielded from the hot sun. Allow your plant to receive strong indirect light indoors; direct sunlight, especially in the summer, will burn the plant’s margins. Simply pinch off any browning leaves you see close to the stem’s base; this will encourage new development. Tillandsias have developed a different method because they cannot acquire nutrition from their roots. They do this brilliantly by making use of Trichomes, tiny structures on their leaves. The plant can absorb nutrients and moisture from the air, rain, and occasionally collecting debris thanks to these tiny hair-like structures. This is essential to an airplant’s survival, particularly in regulating the plant’s water retention. Nice, huh? You can see why Tillandsia’s health depends on a proper watering schedule.
WATERING
The ideal time to water your air plant is in the morning, when you can immerse it in a water bath. Stomata on air plants open during night, allowing for the flow of gases and the evaporation of oxygen. Watering early in the day will help to avoid interfering with this crucial procedure. Although you can sprinkle your Tillandsia, this won’t provide enough moisture over time, and the plant’s vascular cells may start to degenerate.
Your air plant requires either weekly or biweekly soaks, depending on the type and thickness of the leaves. You must be careful not to use distilled water or water with a high salt concentration when doing this. Both of these are deficient in essential minerals and nutrients that your plant need and will eventually kill it after only a few waterings. Water from ponds or the rain is favored, but it might be challenging for most people to find. It is sufficient to use filtered tap water or tap water that has been allowed to sit at room temperature for at least 12 hours. Make sure the entire plant is submerged in the water; turning it upside down frequently prevents floating. Give the air plant about 40 to an hour in its soaking. Most crucial, allow your plants to soak for at least 3 hours on a towel outside of their containers. The worst error that humans commit is this. Keep in mind that air plants are accustomed to extremely dry situations where they have the chance to dry out in nature. The moisture will be trapped in the plant’s meristem (base region) if you immediately put it back in its jar or container, which will inevitably result in rot.
If you have an air plant that blooms, the bloom will typically last two to three weeks! Only partially submerge the flowering Air plant during this time because getting the flower wet will unfortunately limit the bloom length.
Give a water bath for 12 hours the night before you go if you are taking a trip that will last more than two weeks. Once home, soak for another 12 hours before airing out. Additionally, there are a few “extras” you can carry out to encourage more blooms and quicker growth.
FERTILIZING
While fertilizing your tillandsia might help it grow and bloom more quickly, be careful not to overdo it. If you have access to rain or pond water, you can skip this step. We advise fertilizing just once every two months at most. You can purchase typical bromeliad fertilizer and add it to the water in your bath. In the absence of urea-based nitrogen, which is advised only for plants that are kept in soil, use 1/4 of the recommended amount of any water-soluble fertilizer.
NEW GROWTH”PUPS
Every air plant will only ever blossom once in its lifetime, which is sad but real. Trimming off the entire blossom stalk after the flower has dried up will encourage “pupping. Tillandsia” Pups are only new plants growing at the plant’s root. About two months after the mother plant or main base of the plant has completed blooming, they usually start to grow. New pups can be pulled off the mother plant by twisting them, or you can keep them on because they start to group together and the mother plant will eventually wither and be replaced by the puppies. Before you remove the pups, make sure to wait until they are between 1/3 and 1/2 the size of the mother plant.
How can you encourage the growth of air plants?
You’ve had your air plant for a few months, but despite your tender care and attention, it seems to be doing nothing. What is happening? How quickly do air plants actually grow? Don’t give up just yet; air plants called tillandsias actually grow quite slowly. They will eventually grow and blossom if given the right care; it just takes time!
Although certain species of Tillandsia grow more quickly than others, on the whole, they grow quite slowly, which makes them all the more unique when you have a huge specimen plant to exhibit! The growth rate of an air plant will also vary depending on whether it is a tillandsia seedling or an offset from propagation. The first two years of a seedling’s existence are spent growing slowly, rarely exceeding one inch in size. After the first few years, they begin to grow slightly more quickly as they reach bigger in size. Even though plants grown from seeds grow more slowly, they often are larger and better specimens than plants grown from offsets. In comparison to plants grown from seeds, plants developed from offsets or “propagation” grow far more quickly and typically blossom within the first few years as the cycle continues and they create offset of their own!
It can take a long time for the Tillandsia fasciculata tropiflora to reach this size.
Consider the locations where your species of air plant grows in the wild when caring for your air plants. Does the species come from a dry, arid desert with little water (xeric), a cloud forest at a high elevation, or a humid, rainy rainforest (mesic)? Due to the changes in climate, plants located in these particular climates will exhibit particular features and grow accordingly. Plants may develop more slowly in dry climates than in more humid, moisture-rich conditions.
Look at our blog entry (Mesic Vs. Xeric Air Plants) for more information on the distinctions between mesic and xeric plants, as well as what conditions each will require in terms of water and light.
Your ability to accurately recreate the plant’s natural environment will have a significant impact on how quickly it grows. Patience is essential because it might take years for a small air plant to develop and blossom. Although it’s not an exact science, your plant can surprise you and grow and blossom more quickly than usual!
If your plant hasn’t produced pups or offsets yet, don’t worry; it might just be a slower-growing plant. Most air plants will produce pups or offsets during the first year of their existence, after blooming. Just keep giving your plant the attention it needs and making sure it gets enough water and light.
This puppy is developing slowly. It can take a long time for T. xerographica to reach maturity.
T. xerographica is one of the Tillandsia species that grows slowlyest; it can take years for it to reach a size where it can bloom and produce pups. Small T. xerographica plants, which have a diameter of 4-5 inches, may be 3-5 years old! The T. capitata and T. harrisii are two other slow-growing plants that get rather big.
These large-growing Tillandsia plants, which are all slow-growing (top to bottom, left to right): T. harrisii, T. xerographica, T. xerographica in bud, and T. capitata
The T. ionantha variant, T. stricta, T. aeranthos, and T. brachycaulos are some of the air plants with the fastest growth rates. These plants are all categorized as mesic varieties, which implies they prefer more water and filtered indirect light.
These Tillandsia species that develop more quickly bloom and produce pups than other species. (From top to bottom, left to right) T. ionantha, T. stricta, T. brachycaulos, and T. aeranthos
In addition to routine watering, you can give your plants a boost by fertilizing them once a month. This will promote quicker growth, blooming, and pup production. To encourage the growth of your air plant, check out and buy our specially designed Tillandsia fertilizer!
Be patient with your plants; they will grow best with the right amount of light, water, and airflow. When the seasons change, such in the summer or winter, you need alter your care routine. You should have a healthy air plant that eventually blooms and gives birth to pups! You could even manage to cultivate a sizable specimen air plant!