How To Grow And Care For Air Plants

Put the plants in a bowl, sink, or other container face down and let them soak for 10 to 20 minutes. As sitting water can create rot and harm or kill the plant, always take care to gently shake any excess water off the base of the plants. We advise watering the plants in the morning and leaving them outside of their containers in a spot where they can dry in four hours or less. Never leave your air plant submerged in water for a long time. Additionally, you can water your plants by “dunking” them in water multiple times and then gently shaking off the extra.

You can put your plant in the dish for a longer soak for a few hours or even overnight if it is having trouble and appears “thirsty.” Wide open leaves indicate a healthy air plant, but closed and curled leaves indicate a dehydrated one! Never immerse a bloom or flower because doing so can make them decay.

Before watering the plants with tap water, let the water remain for a few hours to let any chemicals evaporate. Whenever feasible, it is ideal to use water from ponds, aquariums, or rain. Never use distilled or artificially softened water, however it’s fine to use bottled water and spring water.

Keep in mind that every plant species is unique and will necessitate a different watering routine than others. Your air plants will suffer if you ever place them in soil.

As you might have imagined, air is another crucial factor for your air plant. For the plants to survive and live a healthy existence, there must be a good flow of pure air. After watering, it’s critical that the plants receive adequate airflow to completely dry in 4 hours. While air plants can survive in containers, it is advised against displaying them in closed containers and to wait until they are entirely dry before re-planting them in a container that might limit air flow.

Plants that are too close to the A/C vents may dry up more quickly and need to be watered more frequently.

If you want to keep your air plants in a terrarium or globe, you’ll need to take them out so you can water them normally. Also, be sure to leave them outside until they have had enough time to completely dry out. Four hours usually suffice. You can mist the tillandsia occasionally while it’s in the terrarium or globe to add some humidity. You’ll want to spritz your plants fewer times as the globe gets smaller and more compact. You can give the terrarium a few mists from a water mister a few times per week if it is bigger and has better air circulation. Just watch out that the plant doesn’t get over-mistified and that it dries off quickly while in the terrarium.

If you bought one of our incredible sea urchin kits, be careful to separate the air plant from the sea urchin before soaking. Wait several hours for the plant to thoroughly dry before removing it from the sea urchin. If you give the air plant back to the sea urchin while it’s still wet, the base will become coated and eventually rot, which will harm the plant. If you want to mildly mist while inside the sea urchin, go ahead!

How are air plants cared for?

Here are 5 easy guidelines to remember when taking care of tillandsia:

  • 1) Give your air plant regular waterings. Your air plant will require routine watering.
  • 2) Supply light to your air plant.
  • 3) Allow your air plant to breathe.
  • 4) Maintain a Pleasant Temperature for Your Air Plant.
  • 5) Don’t harm your airplant by doing this.

How frequently do I need to water my air plant?

For the best care, your plants should be watered 2-3 times each week in addition to once every week. Every 2-3 weeks, a 2-hour bath should be taken. You will need to water or mist your plants more frequently if you live in a hotter, drier region. Your plant’s leaves will start to feel heavier and more wet after watering, and they will be softer and lighter in color when they require more water. Dehydration may be indicated by leaves that are wrinkled or rolled.

How much sun do air plants require?

At least a few hours of bright, indirect sun each day are necessary for air plants to grow and be content.

The optimal placement is between one and three feet from an east or west-facing window, or around two feet from a source of artificial light. They can withstand longer, hotter, more direct sun exposure if you keep them well-hydrated. Avoid areas that are poorly lit.

How long does an air plant live?

Perennial plants are tillandsias, also referred to as air plants. According to the source, they have a lifespan of between two and five years, which indicates that they normally survive longer than two years.

The type of air plant and the growing conditions have an impact on how long they live, though. They reside in deserts, on various surfaces, and on tree branches in their natural habitat (other surfaces they can grow on).

Air plants only experience one flowering during their existence, which marks the culmination of their development and maturity.

Depending on the species, the flowers might remain in bloom for a number of months. However, the air plant will begin to die when the blossoms start to wilt and fade. Air plants develop pups or offsets before they die to carry on the same growth cycle.

Despite the mother plant dying, you can take the pups out and raise them separately. Separating the pups from the mother is referred to as “division is a method of air plant propagation.

As an alternative, you might leave those puppies grouped together ” (also known as “tillandsia balls).

Do you soak air plants with their tops up?

It is best to provide air plants with water that is rich in minerals and nutrients because they obtain many of their nutrients directly from the water. The best water is rainwater, although spring water is a close second if you don’t have a convenient way to collect rainwater. Alternatively, you might utilize well, lake, or creek water. Never use filtered or distilled water. Less minerals and nutrients are present in distilled and filtered water. Many municipal water systems include fewer minerals and nutrients and more contaminants. If you are concerned about your pH level, air plants enjoy slightly acidic water. The ideal range for alkalinity is between 5.5 and 6.0. Most frequently, tap water from the city is higher than this range, making it unsuitable for air plants. Do not worry yourself too much about PH levels. Any good, pure water would do.

After watering your air plants, thoroughly drying them off is the second most crucial step. To ensure that your air plants completely dry, put them down on a dish towel on their side or upside down. For the larger species like Xerographica, Streptophylla, and Sparkler, this is especially crucial. Within two hours of their bath, they should be completely dry to the touch. Wait until your air plants are completely dry before putting them back in terrariums and vases. If you water your plants and then put them in an enclosure right away, your plant can get rot. Your air plants will be content and healthy if you follow these straightforward watering guidelines.

Where do air plants hang?

All air plants are native to tropical regions where freezing temperatures never occur. It’s crucial to keep them at a reasonable temperature without a sweater, right? typically from the 1960s or earlier. Keep them away from windows that are cold in the winter and air conditioner vents.

At least a few hours of bright, indirect sun each day are necessary for air plants to thrive. The optimal placement is between one and three feet from an east or west-facing window, or around two feet from a source of artificial light. They can be exposed to hotter, more direct sun for longer periods of time if you maintain them well-hydrated. Avoid areas that are poorly lit.

Do my air plants need to be misted?

The final technique in our series on watering air plants is misting, which you can employ in between regular soaking or immersing. Read more in our earlier blog posts to learn more about the dunk method and soaking.

If you notice that your plant’s leaves are starting to seem a bit dry or if you live in a dry region with low air humidity, misting is an excellent approach to give it a little additional hydration. Misting is probably not enough water for your plant to grow, therefore you shouldn’t utilize this method as its only supply of water.

The T. tectorum, which has a lot of trichomes, is an exception to this rule and prefers misting to soaking or submerging. In a temperate area, you might only need to mist once a month with one of these guys, or once a week in a hotter environment.

In contrast to other plants with bigger leaves, plants with wispy leaves such the T. ionantha, T. andreana, or T. fuchsii v gracilis may require misting more regularly in addition to weekly watering.

  • It’s easy to spritz plants; just use a spray bottle or hose attachment set to the “mist” setting. Make sure the entire plant gets soaked before misting. As previously mentioned, if this is their sole source of water, this is not the greatest approach for watering. If you mist your plants, remember to additionally soak or dip them once a week at the very least.

A useful generalization to remember is that a healthy air plant will have leaves that are wide open, whereas a dehydrated air plant would have leaves that curl inward. Bring on the mist if you see that your plant is starting to appear a touch dry between your regular waterings!

Do air plants grow in size?

The most common queries that air plant owners and potential owners have about their plants are listed below. Please post any further questions you may have about air plants in the comment area below.

Do Air Plants Purify Air?

Air plants are less successful in air filtration than other plants, although they do remove carbon dioxide and some trace chemical pollutants. However, some research imply that they may be useful in clearing the air of pollutants like mercury.

Do Air Plants Grow Bigger?

Depending on the species, your air plant will reach its full size if it is a pup (baby air plant). As was previously mentioned, air plants may grow from two inches to seven feet tall, so do some research on the kind you choose to learn more about how big it will get. An air plant that you purchase at a market is probably fully developed.

Do Tillandsia Die After Flowering?

Unfortunately, most air plant kinds that bloom are elderly and will soon pass away. On the plus side, air plants produce tiny pups before they die that will eventually reach the size of their parents.

Why Do My Air Plants Keep Dying?

The most frequent factor that causes air plants to die is overwatering. They are very susceptible to root rot, which will destroy them, if they are overwatered. Make sure your air plants dry off within three hours of watering to prevent root rot. Underwatering is the second most typical reason, which the plant can generally overcome. See our suggestions below to rejuvenate a dry plant.

How Do You Revive an Air Plant?

Give your plant an extra bath and then continue your regular watering schedule if you notice that you’ve only slightly under-watered it (for example, if the tips of your plant are turning brown or feeling a little dry). The steps listed below can be used to revitalize a brown or very dry plant:

Place the plant and water container in a room with plenty of light and a temperature between 65 and 75 degrees Fahrenheit (1823C).

Repeat the procedure if the plant continues to wilt three days after being soaked, but this time soak it for just three to four hours.

Air plants are wonderful additions to your plant collection and can make wonderful presents for friends who also enjoy plants. Cute air plant jewelry can be made from the tiniest ones. Ingenious crafts like air plant string art and do-it-yourself terrariums may also be made using air plants. Have you thought of a unique way to use your air plant? Tell us in the comments section below!

How can I determine the health of my air plant?

Unique and hassle-free indoor plants, air plants (Tillandsia) add significant visual charm to your home. These unique plants come in a variety of sizes, have health benefits for your home during the photosynthesis process, and need very little upkeep from you, which appeals to busy professionals. How can you know whether your air plant is healthy considering that they require less maintenance than other plants?

Hydration of the plant is essential to avoid underwatering and determine the health of your air plant. To determine whether the plant is getting too much or not enough moisture, regularly look for discolored leaves or dry or wet rot. An air plant is in good health if it blooms and produces fluff.

There are numerous techniques to determine whether your air plant is healthy, and the majority of them only require a visual examination. They could quickly get ill by doing some unexpected activities. Continue reading to learn more about 11 quick ways to assess the general health of your air plant.

How do I induce flowering in my air plant?

Try to be patient and caring with your air plants because they tend to develop quite slowly at first. Over time, you’ll discover that they are incredibly tolerant plants that benefit from just a few simple instructions.

  • glaring indirect lighting
  • Every once or twice a week, immerse the entire plant for 5–10 minutes in room temperature water. After a bath, let plants to dry for at least three hours by hanging them upside-down on a towel.
  • For better blooms and the growth of your daughters, fertilize every two months with an epiphytic, bromeliad, or non-urea nitrogen fertilizer (pups).


Tillandsias are a member of the broad bromeliad family. Southern North America, as well as temperate regions of Central and South America, are the natural habitats of the Tillandsia genus. According to

The plant species may grow in arid to tropical environments like mountains, deserts, and rain forests. The thick-leafed types are found in dry places, while the thinner-leafed varieties grow there.

in regions where drought is more likely. This is a crucial factor to take into account when purchasing an air plant because it will define the plant’s hardiness and the precise watering requirements.

What is an Epiphyte?

We adore the fact that air plants are epiphytes since they are totally unique and adaptable! The mosses, orchids, bromeliads, and Spanish moss are a few well-known examples (which is also of the genus Tillandsia.) The term “epiphyte” simply describes a plant that grows without soil and acquires its nutrition by attaching to another plant or structure without the use of parasites. They will develop roots in order to tie themselves to something, but they are merely there for stability and support. If the roots of your plants start to go out of control, you may always cut them back with a pair of scissors without harming the plant. An air plant is a distinctive and eye-catching feature in the home because of its capacity to simply “hang out,” which opens up countless design possibilities.

Basic Care

Tillandsias grow on trees and telephone lines in the wild, where they are slightly shielded from the hot sun. Allow your plant to receive strong indirect light indoors; direct sunlight, especially in the summer, will burn the plant’s margins. Simply pinch off any browning leaves you see close to the stem’s base; this will encourage new development. Tillandsias have developed a different method because they cannot acquire nutrition from their roots. They do this brilliantly by making use of Trichomes, tiny structures on their leaves. The plant can absorb nutrients and moisture from the air, rain, and occasionally collecting debris thanks to these tiny hair-like structures. This is essential to an airplant’s survival, particularly in regulating the plant’s water retention. Nice, huh? You can see why Tillandsia’s health depends on a proper watering schedule.


The ideal time to water your air plant is in the morning, when you can immerse it in a water bath. Stomata on air plants open during night, allowing for the flow of gases and the evaporation of oxygen. Watering early in the day will help to avoid interfering with this crucial procedure. Although you can sprinkle your Tillandsia, this won’t provide enough moisture over time, and the plant’s vascular cells may start to degenerate.

Your air plant requires either weekly or biweekly soaks, depending on the type and thickness of the leaves. You must be careful not to use distilled water or water with a high salt concentration when doing this. Both of these are deficient in essential minerals and nutrients that your plant need and will eventually kill it after only a few waterings. Water from ponds or the rain is favored, but it might be challenging for most people to find. It is sufficient to use filtered tap water or tap water that has been allowed to sit at room temperature for at least 12 hours. Make sure the entire plant is submerged in the water; turning it upside down frequently prevents floating. Give the air plant about 40 to an hour in its soaking. Most crucial, allow your plants to soak for at least 3 hours on a towel outside of their containers. The worst error that humans commit is this. Keep in mind that air plants are accustomed to extremely dry situations where they have the chance to dry out in nature. The moisture will be trapped in the plant’s meristem (base region) if you immediately put it back in its jar or container, which will inevitably result in rot.

If you have an air plant that blooms, the bloom will typically last two to three weeks! Only partially submerge the flowering Air plant during this time because getting the flower wet will unfortunately limit the bloom length.

Give a water bath for 12 hours the night before you go if you are taking a trip that will last more than two weeks. Once home, soak for another 12 hours before airing out. Additionally, there are a few “extras” you can carry out to encourage more blooms and quicker growth.


While fertilizing your tillandsia might help it grow and bloom more quickly, be careful not to overdo it. If you have access to rain or pond water, you can skip this step. We advise fertilizing just once every two months at most. You can purchase typical bromeliad fertilizer and add it to the water in your bath. In the absence of urea-based nitrogen, which is advised only for plants that are kept in soil, use 1/4 of the recommended amount of any water-soluble fertilizer.


Every air plant will only ever blossom once in its lifetime, which is sad but real. Trimming off the entire blossom stalk after the flower has dried up will encourage “pupping. Tillandsia” Pups are only new plants growing at the plant’s root. About two months after the mother plant or main base of the plant has completed blooming, they usually start to grow. New pups can be pulled off the mother plant by twisting them, or you can keep them on because they start to group together and the mother plant will eventually wither and be replaced by the puppies. Before you remove the pups, make sure to wait until they are between 1/3 and 1/2 the size of the mother plant.