The fact that air plants can be used in a variety of ways when it comes to decorating is one of the things we love about them. They are simple to attach to driftwood, wreaths, shells, and pretty much anything else you can think of! It’s good to have some greenery within your home, and since air plants don’t require soil, they make it a little bit simpler.
You’ve arrived to the right site if you’ve ever wondered how to install or attach air plants. We’ve prepared a list of some of the simplest mounting options for your favorite air plants below.
Wire:
When practical, we often advise using wire to secure. Just be careful not to use copper wire, which is harmful to air plants and can even cause their death.
If you are using wire, carefully “loop the wire through the bottommost leaves of your plant and wrap it around the base, then attach to your wreath or whatever item that you are attaching to.
We prefer this approach since it makes it simpler to move or water the plants if necessary than if you used adhesive.
Bok Tower Gardens has a stunning hanging display that you should see. Fishing line can be used to make lovely things both inside and outside.
angling line
This is a simple technique to fasten air plants to a wreath or piece of driftwood, and since it’s clear, no one will be able to see it. Simply follow the same procedure as with the wire; pass the fishing line through the plant’s leaves before tying a knot to attach it. If you hang air plants at the end of a long piece of line and fasten it to the ceiling or a shelf, you can also create some stylish floating arrangements using fishing wire.
Roots:
The primary function of air plants in the natural is to attach plants to trees; they do not use their roots to draw in nutrients or water. Our article, All About Air Plant Roots, has further information on air plant roots. If you have some free time, you can accomplish the same thing. Your plant may naturally cling to a piece of driftwood, a wreath, a tree, etc. (Be patient; this may take some time.)
If you’re feeling a little more impatient and don’t want to wait for the plant to anchor itself organically, you can use use wire to affix plants to an object by wrapping the wire around the plant’s roots rather than looping it through its leaves.
Glue:
Because it makes it more difficult to water and care for your plants, we typically don’t advise using adhesive to attach air plants to something. But it is possible! When using adhesive, you can use a plant safe glue that is also waterproof, such E6000. When gluing, be particularly careful to avoid getting glue on any of the leaves; instead, dab the glue on the plant’s base and wait for it to dry before attaching.
Although it’s not our preferred or advised method, you can use hot glue if you need to attach anything quickly. Hot glue won’t hold up as long as other anchoring methods and isn’t watertight.
Final suggestions:
- T. bulbosa belize, T. caput medusae, or T. pseudobaileyi are examples of plants with bulbous bases that should be mounted horizontally or upside down to assist prevent water from accumulating in their bases, which could cause them to rot.
- If you decide to mount your air plants with glue, remember to submerge or spray them rather than soak them. Since you can’t take the plant out to water it, soaking could cause it to decay against the place where it is anchored. Always try to shake away any extra water from your plant to reduce the likelihood of it rotting.
- Be sure to keep an eye on how much sunlight and moisture your wreath is receiving throughout the day if you are mounting and exhibiting air plants on a wreath that will hang outside on your front door. We advise bringing your wreath inside during the warmest part of the day if you see there is a lot of direct sun. For individuals who reside in colder climates, the same holds true. Since they are tropical plants, they do not like extremely low temperatures. Therefore, to prevent them from dying, if you’re using a wreath in the fall or winter, consider hanging it inside your door.
Can super glue be applied to an air plant?
Glue such as Liquid Nails or a glue gun can be used to mount your air plant. Allow the adhesive to cool if using a glue gun.
Before attaching your plant, give it a little moment to harden but not too long to prevent burning. Super glue shouldn’t be used since it could harm the
plant. If just used on the roots, you can also use wire, fishing line, and even staples. Don’t hurt any fleshy things.
the plant’s component. Useless copper mounting or attaching materials will damage your plant, so avoid using them. You may.
As long as it won’t be submerged in water or rust, you can adhere the plant to almost any surface.
How should fixed air plants be watered?
It might be more difficult to water a terrarium with an air plant that is attached inside of it. Make sure that the air plants are in open containers when purchasing or building a terrarium with them.
The plant won’t survive very long if not. Air plants need a lot of light, and when they are kept in a closed terrarium, the heat causes the plants to burn. Additionally, a closed terrarium won’t allow for a lot of air exchange, which is fatal for tillandsias.
You may not need to water your air plants as frequently depending on the size of the aperture in your terrarium. Moisture is unlikely to escape too quickly in terrariums with smaller apertures and a more compact design. So you can water less frequently and avoid soaking or dunking.
Don’t merely pour water on your air plant when watering it in a terrarium. Since there is no soil or charcoal layer in air plant terrariums, there is a greater risk of waterlogging.
In order to water an air plant in a terrarium, place the spray bottle’s nozzle within the terrarium’s entrance. The plant will then absorb water through its trichomes on leaves if you sprinkle only the leaves.
In order to generally spritz the entire terrarium, you may also get a spray bottle that emits a fine mist similar to this one. This allows your air plant to absorb water.
Whatever method you choose to use to water your terrarium air plant, be careful to shake off any extra water to avoid rot. It is beneficial for air exchange to leave a terrarium on a windowsill or even outside where it may catch some wonderful breeze.
However, attempting to remove the air plant from the terrarium is the best course of action. You can accomplish this by steaming the terrarium to allow the glue to soften. Another option is to take down all the other ornaments and bathe the entire terrarium for 20 to 30 minutes in water. Hopefully, doing so will melt or loosen the glue just enough to allow you to remove your air plant.
How to water air plants glued to ornaments and displays?
Don’t be concerned if you purchase an air plant that is affixed to a display or is housed in a holder of some sort. Your air plant will typically emerge spontaneously. Make sure to mist as many of the leaves as you can while watering your air plant in this arrangement.
Keep any water from dripping and accumulating at the base. The water won’t evaporate rapidly enough and will remain there, which is especially true if the base is largely enclosed. This will lead to decay or fungus.
Most of the time, leaves with glue on them are damaged, perish, and fall off. Although this may be distressing, everything will be alright with proper care. The center of your air plant will begin to sprout new leaves.
You can water your air plants normally if the glue is sturdy and the plant is securely fastened. You can aggressively spritz the plant or even soak it, depending on the show (possibly upside down).
Shake it off vigorously after that to let any extra water drip off. If you think there could be any water there, you can use a fan to help your air plant dry off. As a general rule, your air plant needs to dry off within 3 to 4 hours of watering.
Attempting to remove your glued air plant from a display is also the recommended course of action. Please keep misting your plant to water it, and maybe it will soon emerge.
However, you can pluck your plant out and sacrifice a few leaves if you notice that the bottom leaves are dying. This is especially true if it is obvious that the entire plant lacks different display options and is not in the best shape.
Summarywatering glued air plants
Numerous air plants can be found in terrariums or fastened to displays in home decor and other retailers. Despite how aggravating this is, consider that by purchasing one, you will probably aid in saving the air plant.
To properly water and care for your glued tillandsia, it is essential to try to remove it from the display. Please, nevertheless, be patient.
Try to soak your new air plant in warm water for around 20 minutes after bringing it home. Warm water may be able to soften common white or hot glue enough for you to remove the plant.
Nevertheless, if it doesn’t come out, you can start wriggling it with tweezers. Alternatively, you can dissolve the glue with hot steam.
If the health of your recently acquired air plant is not good, you might have to sacrifice the bottom leaves and remove the plant. The essential thing to avoid, though, is overwatering the base, which may cause decay while it is on exhibit.
Your plant will become mushy and soft from rot or fungus, at which point it will crumble. You wouldn’t be able to save your air plant at this time.
If your air plant doesn’t finally emerge, you can think about shattering the container or display and then attempting to remove the glue. This is particularly valid if your plant has expanded and need extra room.
Please visit this resource page if you want to learn more about how to take care of air plants.
How are crystals adhered to air plants?
The alternative method for achieving the smooth air plant growing on a crystal appearance that we achieve with Air Friend is to bind the plant to the crystal using plant friendly adhesive.
A good illustration of how to attach an air plant to a crystal is shown in this gold-dipped amethyst air plant garden.
The bottom of the air plant should be coated with a plant-safe adhesive before being glued to your preferred crystal. Between the crystal and the air plant, the adhesive produces a moisture barrier. This lowers the chance of root rot while the air plant grows on a crystal.
While the air plant is attached to the crystal, new leaves will keep sprouting in the center. Simply use a spray bottle to water your plants or submerge it in a bowl of water. After each watering, be sure to shake off any extra water, and you are ready to go.
Are you having trouble growing an air plant on a crystal? For thorough air plant care advice, see our Ultimate Air Plant Care Guide!
And don’t forget to share with everyone how you develop your air plants and keep them lush and content by leaving a comment below.