Why keep dying my air plants? It’s likely that your Tillandsia is really thirsty if it doesn’t appear its best, especially if it’s shriveled or discolored. Spritzing normally doesn’t give enough moisture to keep the plant healthy and hydrated, despite the fact that misting the plant is frequently advised.
When this is the case, reviving a Tillandsia entails getting the plant back to its previous condition of health and hydration. The simplest way to do this is to submerge the entire plant in lukewarm water in a bucket or basin. To prevent the plant from floating to the surface of the water, you might need to attach it to a hefty item.
Allow the bowl to soak for 12 hours in a warm place. The plant should be taken out of the bowl, laid out on a layer of paper towels, and allowed to air dry before being put back in its usual spot.
Repeat the technique, but this time leave the Tillandsia submerged for only around four hours if the plant seems dry and sickly. Shake the plant lightly while holding it upside-down to drain the leaves of extra moisture.
Can a dried-out air plant be revived?
Most people will at some point in their adventure of cultivating tillandsias wonder how to revive their air plants. Finding the source of the problem is the first step in saving any air plant. After that, you can take the necessary steps to address the issue that is harming your air plant.
Your air plant may occasionally start to seem very white or gray. A naturally green air plant that is going very white or gray could be an early symptom of your air plant drying, even though it is typical for your air plants to be covered in a coat of white or gray hair or trichromes in most circumstances.
When your air plant becomes extremely white or gray, the good news is that it is not dying. When the air plant is dehydrated, the trichromes are simply becoming more noticeable and making the plant appear paler than usual.
A dry air plant can be brought back to life by soaking in water for 5-8 hours. After soaking, shake out any excess water, and let your air plant to dry out in 4 hours. Up until the plant no longer appears dry, repeat the prolonged soaking every two to three days.
If your air plant is drying out again after being rejuvenated with a series of prolonged soaks, check the light, temperature, and humidity conditions of the immediate area.
To assist your air plant maintain moisture, place it away from direct or extremely bright indirect light. Around 5090 F is the ideal temperature for air plants. If you subject your air plant to severely cold or hot temperatures, it could be difficult to recover it. It’s possible for the air plant to become too dry to survive in extreme temperatures.
The air plant’s brown or black leaves are often an indication of root decay. When air plants are not completely dried off after watering, they might get root rot. The air plant is prone to fungus infections that irreversibly harm the plant cells when the leaves are frequently damp. The air plant would eventually turn brown or black as a result of these dead cells.
As soon as you notice the brown or black leaves, you can carefully remove those leaves to revitalize your air plant and stop the infection from spreading. To prevent root rot, keep the air plant in a place with sufficient airflow and allow it to dry out promptly after each watering.
The air plant may perish in severe cases of root rot that have reached the plant’s center. You will need to try again with a fresh plant if the root rot is so severe that the plant begins to fall apart.
It can take some trial and error to understand how to grow air plants. The most frequent explanation for “why is my air plant dying” is root rot as a result of the air plant not drying out correctly. Air plants might wither from dryness, lack of light, or lack of nutrients in the water.
To lessen the likelihood of root rot in the future, you might try several techniques and situate your air plant somewhere with more air movement.
How come my air plant is dying?
More air plants perish from overwatering than from underwatering. The telltale indicator is when the bottom of your air plant appears brown and slimy. Instead of submerging or soaking your air plants, try misting them with a spray bottle. In between waterings, make sure your air plant has completely dried out. Only mist your air plants 1-3 times each week. Less can be more. It’s crucial to dry your air plant within four hours because they can become overwatered if they don’t. Get a fan for your air plant if it doesn’t dry after four hours of watering, and water it less the following time.
2. Insufficient air causes air plants to lack nutrients. It results in “dry rot.” There won’t be enough food if there isn’t enough air movement around air plants. Keep in mind that air plants consume nourishment. Terrariums and small, quiet locations like toilets shouldn’t be used to house air plants because there isn’t enough airflow in these areas. Instead, pick a place with lots of natural light and fresh air, such as close to an open window, in a large room with other rooms adjacent to it, in a courtyard or on a veranda. Lack of air flow can also lead to overwatering because it delays the air plants’ ability to fully dry up. The problem with air plant holders is dry rot. Your air plant may develop dry rot on the area of the plant that has poor air flow from the planter if the base is placed in a planter, such as a pot, hanger, or pouch, that has no ventilation. Before you notice the rot, it will have spread and your air plant will be dead.
3. Lack of Light – To produce their own nourishment, air plants require light. If your air plants are indoors, make sure they are one meter or less from a window. They’ll definitely perish from lack of sunshine if you put them in a dark hallway.
4. Too much direct sunlight will burn your plant or severely dry the foliage. Generally speaking, 45 minutes of moderate early morning or late afternoon direct sunshine is acceptable. However, it is advised to use filtered sunlight or total shade.
5. Frost – Because they are sensitive to the cold, air plants. They dislike temperatures below 0 degrees Celsius. If you live in a chilly climate, you might want to think about bringing your air plants inside during the winter.
6. Humidity – some types of air plants like it when the humidity is high. If the leaves of your air plant are too curled, the air may be too dry for the plant. Spraying or soaking air plants in water just isn’t enough moisture if the air is too dry. Consider soaking your air plant for 30 minutes each week in addition to your regular spraying if you believe it died from low humidity. or daily spray your plant. Additionally, you can put the air plant on a piece of driftwood or any object that can hold moisture. Another choice is to make a bed using a mixture of 50% perlite and 50% orchid potting mix. Spray the mixture every time you spray your plants. Your air plants might even drop roots into the mixture since they are so content.
7. Rust – Your air plant will develop dead areas as a result. Keep your plant away from anything that is rusty. Regular wire might rust in the future. For mounting air plants, use plastic-coated or galvanized wire.
8. Copper wire is well recognized for killing air plants. Copper is poisonous to air plants, particularly when it is regularly moist.
9. It’s typical for the mother air plant to pass away. Air plants develop, blossom, give birth to pups, and then go extinct. If your air plant has already bloomed and produced pups, it’s entirely possible that she is about to die. Don’t get rid of her just yet. Before she leaves, she might surprise you by bearing even another pup.
A dead air plant you purchased from us? Give air plants another go with this 20% off coupon. To receive 20% off your upcoming order of air plants, use the promo code AIRDEAD at checkout.
Why is my air plant becoming shriveled?
Here is a list of things to consider while thinking back on the conditions and upkeep of your prized tillandsias, even though there is no conclusive explanation for why any one particular air plant perished.
Over & Under Watering
An air pant can be killed by either too much or too little water. Watering a plant correctly might be challenging at times. Before placing your plant back into a container, soak it for 20 to 30 minutes, shake it out, and let it dry for a few hours. We’ve had the best success making our weekly water baths a tradition. A decent rule of thumb is to observe the leaves’ state the day after a thorough bath. The leaves ought to be open and more flat, not folded or curled. Aim for this appearance with each watering and adjust the frequency accordingly so that your air plants exhibit this appearance the majority of the time. Aeranthos Major is an excellent indicator of hydration in air plants. Depending on the plant’s level of hydration, the leaves of this species significantly curl and open. In smaller species like Ionanthas, the distinction is more pronounced.
When plants are not given enough time to completely dry out in between water baths, they will succumb to overwatering and die. This frequently happens when water is misted over the air plants while they are housed in a terrarium or other enclosure. The enclosure’s tightness retains moisture, which can lead to plant base rot.
Exposure to Salts & Chemicals
Salts from water softeners may smoothen our skin and hair, but they can also damage air plants. Have you ever watered a home plant a few times and then let it to dry before seeing a white crust forming on the top of the soil? These salt buildups are particularly damaging to air plants. Salts end up being deposited on the ends of leaves in air plants because they lack soil to filter the salts. This will eventually choke the plant because the trichomes won’t be able to absorb nutrients and water. Additionally bad for plants, some municipal water contains chlorine, which should be avoided if at all feasible.
The ideal water to use is non-carbonated mineral water, rainwater, water from a well, pond, or lake. Store-bought bottled and filtered water actually lacks the majority of minerals despite being devoid of hazardous salts. While using only bottled water to water a plant won’t kill it, if that’s all they ever get, they’ll be starved of essential nutrients.
Extreme Heat and Light
Plants quickly become dehydrated in direct sunshine. Sitting in a hot room or close to a hot window will have the same effect. On rare occasions, the plants’ leaves might even become burned by the sun. Air plants shouldn’t be kept in glass containers with direct sunshine because the containers can grow extremely hot (like a miniature greenhouse) and the glass may function as a magnifying glass, concentrating the sunlight on the leaves and rapidly causing them to burn. The majority of air plants prefer temps that you prefer, so that’s a solid generalization. Your air plant probably won’t appreciate it if you wouldn’t sit near your window for several hours at a time since you’d be too hot. The majority of tillandsia prefer temperatures between 55 and 85 degrees.
Nevertheless, a number of air plant species are tolerant of high temperatures in their natural habitats. In hotter lowland areas, xeric plants including Xerographica, Harisii, and Stricta can all be found. These species can survive in warmer climates and brighter environments as long as water is available. In general, the need for watering increases as the temperature rises.
Too Little Light
For several hours each day, air plants need powerful artificial lighting or indirect natural light. The health of air plants kept in dim bathrooms or inside hallways will deteriorate, and they will finally perish. In offices, the lighting is typically adequate because it is on continuously for a number of hours each day. Tillandsias shouldn’t be an issue if the area is bright enough for other common houseplants like pothos, spider plants, and philodendrons.
Cold
It is extremely uncommon to observe frost or freezing conditions, despite the fact that many kinds of air plants natively grow at high heights. Most air plants cannot survive in temperatures below 32 degrees or in frost. Spanish moss and the several varieties of ball moss, which can be found naturally from Texas to Florida and up into coastal Virginia, are the principal exceptions to these guidelines. Spanish moss (Tillandsia usneoides) can tolerate days with highs below freezing as well as nights in the teens and twenties Fahrenheit. However, this would be a death sentence for the majority of air plants, especially the ones that are readily available in stores.
For plants that arrive DOA due to the cold in the winter, we continue to provide our 30-Day Guarantee. Since heat packs frequently run out and are ineffective at the end of their useful lives, when they are most required, we no longer use them to ship plants. Our research has also revealed that they have the ability to burn the vegetation. In order to limit their exposure to the cold, it is better to have plants brought to wherever you are when mail is delivered (your place of employment or educational institution, for instance).
If your air plants are only kept outside during the warm months, we advise bringing them inside once the temperature at night drops below 45 degrees. Any air plant will thrive indoors. There are certain crucial care issues to go through for the winter months, especially at higher latitudes. Our second blog that covers winter care for air plants is located here.
Fertilizer Burn
Your air plants may burn if you fertilize them more frequently and at higher water concentrations. You could want to include fertilizing in your routine if you like the misting technique of watering. But before you spray the plants, make sure the fertilizer is thoroughly mixed and diluted (using the same one-quarter teaspoon per gallon of water).
Moisture & Poor Air Circulation
The majority of air plants originate in chilly, windswept highlands or arid deserts. Not all air plants prefer extremely high humidity, but some do. Make sure your plants quickly dry out after bathing. When drying, we prefer to place them behind a ceiling fan. This will lessen the likelihood of bases being too wet and developing root rot. Even if you mist or spray your plants to water them, we still advise taking them out of their cages. Spanish moss needs to be hung in an area with plenty of fresh air. If used as stuffing in a terrarium or against a wall, it will gradually become brown.
Their Natural Life Cycle
Nothing lasts forever, and air plants are no exception. The growth, blooming, and reproduction processes that occur during the life cycle of air plants involve pups and seedlings. Even while blooming is one of the peaks in the life of most air plants, it is not usually a downward spiral after that. A few times a year, we have experienced the blooming of tiny air plants like Ionanthas. The mother plant will eventually focus the majority of her energy on creating little offsets, though. When the mother plant totally gives up, the offsets will have grown to the mother’s size, and the cycle repeats. A pupping plant does not necessarily indicate that you misted the mother plant’s bloom because certain species appear to prefer generating pups before the mother plant has blossomed! You have two choices when an air plant begins to generate offspring: You can divide the new plants or you may let them cluster organically. For more details, see our blog post on dividing air plant pups.
comment
This knowledge has been really beneficial. Since May of this year, I have probably invested around $1000.00 in air plants. I had never heard of them before that. I believe that I am in love with them. They are the most exquisite and distinctive things I have ever encountered.