The fact that air plants can be used in a variety of ways when it comes to decorating is one of the things we love about them. They are simple to attach to driftwood, wreaths, shells, and pretty much anything else you can think of! It’s good to have some greenery within your home, and since air plants don’t require soil, they make it a little bit simpler.
You’ve arrived to the right site if you’ve ever wondered how to install or attach air plants. We’ve prepared a list of some of the simplest mounting options for your favorite air plants below.
Wire:
When practical, we often advise using wire to secure. Just be careful not to use copper wire, which is harmful to air plants and can even cause their death.
If you are using wire, carefully “loop the wire through the bottommost leaves of your plant and wrap it around the base, then attach to your wreath or whatever item that you are attaching to.
We prefer this approach since it makes it simpler to move or water the plants if necessary than if you used adhesive.
Bok Tower Gardens has a stunning hanging display that you should see. Fishing line can be used to make lovely things both inside and outside.
angling line
This is a simple technique to fasten air plants to a wreath or piece of driftwood, and since it’s clear, no one will be able to see it. Simply follow the same procedure as with the wire; pass the fishing line through the plant’s leaves before tying a knot to attach it. If you hang air plants at the end of a long piece of line and fasten it to the ceiling or a shelf, you can also create some stylish floating arrangements using fishing wire.
Roots:
The primary function of air plants in the natural is to attach plants to trees; they do not use their roots to draw in nutrients or water. Our article, All About Air Plant Roots, has further information on air plant roots. If you have some free time, you can accomplish the same thing. Your plant may naturally cling to a piece of driftwood, a wreath, a tree, etc. (Be patient; this may take some time.)
If you’re feeling a little more impatient and don’t want to wait for the plant to anchor itself organically, you can use use wire to affix plants to an object by wrapping the wire around the plant’s roots rather than looping it through its leaves.
Glue:
Because it makes it more difficult to water and care for your plants, we typically don’t advise using adhesive to attach air plants to something. But it is possible! When using adhesive, you can use a plant safe glue that is also waterproof, such E6000. When gluing, be particularly careful to avoid getting glue on any of the leaves; instead, dab the glue on the plant’s base and wait for it to dry before attaching.
Although it’s not our preferred or advised method, you can use hot glue if you need to attach anything quickly. Hot glue won’t hold up as long as other anchoring methods and isn’t watertight.
Final suggestions:
- T. bulbosa belize, T. caput medusae, or T. pseudobaileyi are examples of plants with bulbous bases that should be mounted horizontally or upside down to assist prevent water from accumulating in their bases, which could cause them to rot.
- If you decide to mount your air plants with glue, remember to submerge or spray them rather than soak them. Since you can’t take the plant out to water it, soaking could cause it to decay against the place where it is anchored. Always try to shake away any extra water from your plant to reduce the likelihood of it rotting.
- Be sure to keep an eye on how much sunlight and moisture your wreath is receiving throughout the day if you are mounting and exhibiting air plants on a wreath that will hang outside on your front door. We advise bringing your wreath inside during the warmest part of the day if you see there is a lot of direct sun. For individuals who reside in colder climates, the same holds true. Since they are tropical plants, they do not like extremely low temperatures. Therefore, to prevent them from dying, if you’re using a wreath in the fall or winter, consider hanging it inside your door.
How are air plants attached?
Utilizing silicone sealant, airplants can be installed on a variety of logs, rocks, and wood. Apply a little amount of silicone to the branch on which you want to install the plant. Then, firmly press the plant into the silicone.
Should air plants be mounted?
Your air plants will need to be mounted or hung because they don’t need to be planted in soil.
Your patio ceiling or the branches of a tree are also suitable places to hang air plants. Use a wire, string, or even a fishing line to hang the items. Just be careful not to use copper wire because copper is poisonous to them while using wire.
Your air plants can also be mounted on a wreath or a piece of driftwood. You can mount them with a wire or fishing line.
Using a Wire
You may easily remove your air plants when you need to soak them in water and then reattach them if you mounted them using wire. Simply carefully thread the wire through the plant’s base, several times wrap it around the base, and then fasten it to your wreath or driftwood.
Make a few loops in a wire to form a bowl-like shape and a hook on one end so you can hang your air plants from it. The bowl-like shape will support your plant so that it is upright. In the interim, you can suspend your wire from a screw, rod, or tree branch using the hook.
Using a Fishing Line
A fishing line, on the other hand, is transparent and would be a suitable choice if you do not want anything too obvious. To attach it to your wreath or piece of driftwood, simply weave it through the plant’s leaves and tie a knot.
The rope can also be used to hang a plant while the other end is fastened to the ceiling, a pole, or a tree branch. You may create a floating tillandsia arrangement by making several of these hanging air plants in different lengths.
Do you soak air plants with their tops up?
It is best to provide air plants with water that is rich in minerals and nutrients because they obtain many of their nutrients directly from the water. The best water is rainwater, although spring water is a close second if you don’t have a convenient way to collect rainwater. Alternatively, you might utilize well, lake, or creek water. Never use filtered or distilled water. Less minerals and nutrients are present in distilled and filtered water. Many municipal water systems include fewer minerals and nutrients and more contaminants. If you are concerned about your pH level, air plants enjoy slightly acidic water. The ideal range for alkalinity is between 5.5 and 6.0. Most frequently, tap water from the city is higher than this range, making it unsuitable for air plants. Do not worry yourself too much about PH levels. Any good, pure water would do.
After watering your air plants, thoroughly drying them off is the second most crucial step. To ensure that your air plants completely dry, put them down on a dish towel on their side or upside down. For the larger species like Xerographica, Streptophylla, and Sparkler, this is especially crucial. Within two hours of their bath, they should be completely dry to the touch. Wait until your air plants are completely dry before putting them back in terrariums and vases. If you water your plants and then put them in an enclosure right away, your plant can get rot. Your air plants will be content and healthy if you follow these straightforward watering guidelines.
Can air plants be placed inside rocks?
- Don’t bury them in the ground. Ever. Because they are epiphytes, they grow atop other plants rather than in the ground.
- You can plant them in imaginative locations because they don’t require dirt. One can be set in a shallow bowl or vase with rocks or sand, one can be put in a small container with a magnet and placed on the refrigerator, or one can be tied to driftwood with a clear fishing line.
- Don’t confine them to a terrarium. Yes, they are adorable, and Instagram is full with pictures of air plant terrariums, but air plants need to breathe. They will become overly damp in a confined vessel, which will cause them to rot or contract a fungus.
How are crystals adhered to air plants?
The alternative method for achieving the smooth air plant growing on a crystal appearance that we achieve with Air Friend is to bind the plant to the crystal using plant friendly adhesive.
A good illustration of how to attach an air plant to a crystal is shown in this gold-dipped amethyst air plant garden.
The bottom of the air plant should be coated with a plant-safe adhesive before being glued to your preferred crystal. Between the crystal and the air plant, the adhesive produces a moisture barrier. This lowers the chance of root rot while the air plant grows on a crystal.
While the air plant is attached to the crystal, new leaves will keep sprouting in the center. Simply use a spray bottle to water your plants or submerge it in a bowl of water. After each watering, be sure to shake off any extra water, and you are ready to go.
Are you having trouble growing an air plant on a crystal? For thorough air plant care advice, see our Ultimate Air Plant Care Guide!
And don’t forget to share with everyone how you develop your air plants and keep them lush and content by leaving a comment below.