All air plants are native to tropical regions where freezing temperatures never occur. It’s crucial to keep them at a reasonable temperature without a sweater, right? typically from the 1960s or earlier. Keep them away from windows that are cold in the winter and air conditioner vents.
At least a few hours of bright, indirect sun each day are necessary for air plants to thrive. The optimal placement is between one and three feet from an east or west-facing window, or around two feet from a source of artificial light. They can be exposed to hotter, more direct sun for longer periods of time if you maintain them well-hydrated. Avoid areas that are poorly lit.
How can air plants be grown the best?
Since air plants don’t require soil to survive and, like succulents, store surplus water in their leaves, they require no upkeep. As a result, air plants are preferred by DIY house decorators. The following air plant care advice can help you cultivate air plants at home:
- 1. Regularly mist. Mist the leaves of your air plants to provide water. For easy-care misting, use a spray bottle filled with tap water.
- 2. Plant hanging planters with air plants. You can grow air plants everywhere, not only in conventional pots because they don’t need soil. Instead, think about getting your air plants hanging wire planters or pendants. The Tillandsia xerographica air plant, which often grows on tree limbs, can flourish when kept suspended inside.
- 3. Plant terrariums with air plants. The majority of air plants, including Tillandsia ionantha air plants, thrive in glass terrariums (also known as sky plants). Just add some driftwood or other organic material to the terrarium so the air plants have something to anchor to. The fact that air plants may grow on top of healthy plants without causing any harm should be noted. They are not parasitic.
- 4. Ensure adequate airflow. Make sure your air plants have airflow, but don’t put them next to vents for the HVAC system.
- 5. Make sure your air plants receive UV light. Either utilize a UV-producing artificial light or hang your air plants in a window.
- 6. Occasionally fertilize. Consider fertilizing your air plants using bromeliad fertilizer, which is typically sold at garden centers, during the growing season (spring and summer).
- 7. Spread your air plants’ seeds. In order to reproduce, air plants produce offsets or pups. From the mother plant’s base, smaller plants sprout. Before separating, wet the mother plant and offsets, then take care not to damage the young air plants.
How is an air plant cared for?
Here are 5 easy guidelines to remember when taking care of tillandsia:
- 1) Give your air plant regular waterings. Your air plant will require routine watering.
- 2) Supply light to your air plant.
- 3) Allow your air plant to breathe.
- 4) Maintain a Pleasant Temperature for Your Air Plant.
- 5) Don’t harm your airplant by doing this.
How are air plants misted?
The final technique in our series on watering air plants is misting, which you can employ in between regular soaking or immersing. Read more in our earlier blog posts to learn more about the dunk method and soaking.
If you notice that your plant’s leaves are starting to seem a bit dry or if you live in a dry region with low air humidity, misting is an excellent approach to give it a little additional hydration. Misting is probably not enough water for your plant to grow, therefore you shouldn’t utilize this method as its only supply of water.
The T. tectorum, which has a lot of trichomes, is an exception to this rule and prefers misting to soaking or submerging. In a temperate area, you might only need to mist once a month with one of these guys, or once a week in a hotter environment.
In contrast to other plants with bigger leaves, plants with wispy leaves such the T. ionantha, T. andreana, or T. fuchsii v gracilis may require misting more regularly in addition to weekly watering.
- It’s easy to spritz plants; just use a spray bottle or hose attachment set to the “mist” setting. Make sure the entire plant gets soaked before misting. As previously mentioned, if this is their sole source of water, this is not the greatest approach for watering. If you mist your plants, remember to additionally soak or dip them once a week at the very least.
A useful generalization to remember is that a healthy air plant will have leaves that are wide open, whereas a dehydrated air plant would have leaves that curl inward. Bring on the mist if you see that your plant is starting to appear a touch dry between your regular waterings!
How to Water an Air Plant
The most challenging aspect of caring for air plants is watering them. Some individuals use misting religiously, others immerse their air plants, while yet others utilize a mix of misting and soaking.
In our experience, watering air plants is challenging because the plant’s requirements differ significantly depending on the environment. Additionally, some species need particular care. Assessing your environment is the first step in watering your air plant. How much light is reaching your plant? What’s the temperature like inside your house right now? Is there a lot of dry air there (is your plant close to a heater or fireplace)? Is it also really humid?
Following your responses, you can modify the air plant watering schedule to meet your specific requirements. Here is what we suggest as a place to start:
- Every one to two weeks, give your air plant a 5- to 10-minute soak in room-temperature tap water (or, if you can get it, rainwater or pond water).
- Once your plant has soaked, gently shake off any extra water. It should be placed on a towel upside down in a well-lit area. This is very crucial. If extra water is allowed to stand, air plants will quickly decay.
- The plant should be able to dry completely in 3 hours once the soaking process is finished. More time than this could cause your plant to decay. Try putting it somewhere brighter with better airflow to encourage quicker drying.
- Mist your plant well once a week (instead of watering it). Make sure the entire surface is saturated (but not so much that there is water dripping down into the plant).
- You need to water more when the air is hotter and dryer (summer, early fall). Your air plant will require less water during the cooler and more humid seasons (winter and spring). Just be mindful of your plant because heaters and fires dry out the air.
- Water everything in the morning. Evening sopping or sprinkling interferes with the plants’ ability to breathe at night and prolongs the drying process.
Is My Air Plant Getting Enough Water?
The tops of your air plant’s leaves may turn brown or crispy if you’ve been neglecting to water it. When an air plant is under-watered, its leaves’ inherent concavity tends to become more pronounced.
Unfortunately, it’s frequently too late to save an overwatered air plant. Your plant has certainly succumbed to rot if the base of the plant turns dark or black and leaves are falling out or off from the center.
Regarding temperature, air plants are fairly tolerant. They thrive between 50 and 90 degrees Fahrenheit. The ideal temperature difference between daytime and nighttime is roughly 10 degrees.
To maintain your air plant healthy, include orchid or specific air plant fertilizer in your watering routine once or twice a month. Simply sprinkle some in your water, then carry on as usual. Your air plant will blossom and propagate if you fertilize it (or pup — more on this later)
How often should an air plant be watered?
For the best care, your plants should be watered 2-3 times each week in addition to once every week. Every 2-3 weeks, a 2-hour bath should be taken. You will need to water or mist your plants more frequently if you live in a hotter, drier region. Your plant’s leaves will start to feel heavier and more wet after watering, and they will be softer and lighter in color when they require more water. Dehydration may be indicated by leaves that are wrinkled or rolled.
How are air plants started?
Even though air plant seeds are tiny, they have what are known as parachutes or comas on top of them. Because of their fluffy parachute top, seeds can move around with the wind in the natural world. Brown seeds with a fluffy top will predominate.
Brown seed pods will also grow where the blossoms formerly did. The seed pod will resemble a cotton puff once it has opened up. The seeds can then be separated using tweezers. They resemble dandelion seeds somewhat.
In order to avoid being readily swept away by strong rains, most seeds in nature are dispersed right before a rainy season. They land in places where germination is more likely to succeed, such as on cliffs, trees, and other locations.
Please see this post if you’d want to learn more about how to pollinate the flowers of air plants and how seeds develop.
How to grow air plants from seed?
Gather seeds to begin the germination process. Some seeds will begin to sprout within the seed pods (you will notice small green nubbins on them).
The next step is to get a sizable dish (the larger, the better, depending on how many seeds you have) and some substrate ready. Make sure to space your seeds widely apart. This will give the plants more time to grow before you need to divide them. Tillandsia seedlings that are too small can break easily.
The optimal substrate for tillandsia sowing should have adequate moisture capacity and be able to drain well. Select a sizable, transparent container and fill it with the substrate. As stagnant air will kill seedlings, make sure to let adequate air exchange.
Step 1: Soak the seeds
Some seeds, as was already noted, will begin to gently sprout even while still inside seed pods. If they have begun to sprout, you will notice tiny green nubbins or points on them.
Observe the seeds after removing them from the seed pods. You can move on if you spot green nubbins.
However, if your seeds appear dry and browned, soak them for about 14 days in warm water in a plastic or deli container (some might take up to 3-4 weeks to germinate). Make sure to have holes in them while keeping the lid on. Additionally, open the lid occasionally to let air flow.
Keep seeds out of water for no more than four weeks. By now, hopefully, you will notice green nubbins; remove them and place them in a growing medium.
Step 2: Spread them
It is difficult to separate the seeds of air plants, which is one of the main difficulties. To ensure that you can see all of the seeds clearly, spread your seeds out on the table, preferably against a dark background.
The puffy coma portion, which is the top portion, will have seeds on the bottom. Use a magnifying lens and tweezers if required to carefully separate each seed.
Step 3: Place seeds on a growing medium
After around two weeks, the seeds should be planted on a growing medium to continue growing. The material you choose should be able to retain moisture without getting overly soggy.
Make sure to leave as much space between seeds when laying them. You can prevent having to separate them when they are fragile by doing this. When choosing a substrate or growing environment for your air plant seeds, consider:
How long does an air plant live?
Perennial plants are tillandsias, also referred to as air plants. According to the source, they have a lifespan of between two and five years, which indicates that they normally survive longer than two years.
The type of air plant and the growing conditions have an impact on how long they live, though. They reside in deserts, on various surfaces, and on tree branches in their natural habitat (other surfaces they can grow on).
Air plants only experience one flowering during their existence, which marks the culmination of their development and maturity.
Depending on the species, the flowers might remain in bloom for a number of months. However, the air plant will begin to die when the blossoms start to wilt and fade. Air plants develop pups or offsets before they die to carry on the same growth cycle.
Despite the mother plant dying, you can take the pups out and raise them separately. Separating the pups from the mother is referred to as “division is a method of air plant propagation.
As an alternative, you might leave those puppies grouped together ” (also known as “tillandsia balls).
How can I keep my air plant in good health?
Under-watering is the main reason why air plants die in new owners’ care. The overwatering that follows is a close second. According to a longstanding myth, these plants draw all the water they need from the atmosphere and don’t even need to be watered at all. While living in a climate similar to the Tillandsia’s natural environment and having them outside, this may be true, for the rest of us, watering is necessary. No need to worry; your plants will thrive if you follow these easy watering instructions. Pick one of the techniques listed below to water your plants like a pro.
The easiest approach to keep your air plant happy, particularly indoors, is to submerge it. People are frequently shocked to learn that you can completely submerge an aerial plant, but they adore it nonetheless! The only effective method for completely rehydrating your air plant is this. When water enters the plant’s root through the entire leaf surface, a stunning metamorphosis occurs. Curly leaves will frequently straighten, and although your Tillandsia won’t have meaty leaves like succulents, there will be a distinct fullness after soaking.
THE AMOUNT A dry tillandsia can benefit greatly from even a brief 30-minute bath, although they are capable of holding their breath for up to 12–24 hours. Our general rule is to soak for 6–12 hours once every week. Ours normally soaks for 12 hours or so. Even without losing too many of them, we’ve occasionally forgotten about them. Some xeric species, such as Tectorum and Xerographica, should be handled with caution. Since they are more delicate, they favor spraying.
Another method of watering your air plant is to spray it until it is completely saturated. It’s important to keep in mind that this isn’t a light sprinkling. For optimal watering, your plant needs to be totally submerged. While spraying your air plant is a good technique to hydrate it, you’ll need to do it much more frequently than soaking, which results in a more thorough rehydration.
THE AMOUNT 2-3 times each week, spray until completely saturated. This will be greater if you reside in Arizona and less if you reside in Hawaii. Whether your plant is indoors or outdoors, as well as the type of light it receives, are the two most crucial aspects to consider when deciding when and how much water to apply. More water will be appreciated if there is a lot of sun. Regular watering is essential indoors, where there is heat, air conditioning, and generally dry circumstances.
Watch the leaves of your plants to see if they are showing signs of thirst. A healthy white fuzz really indicates that your plant is healthy and not necessarily drying out because curly leaves are drier. Other indicators that you are under-watering include brown leaf tips and a generally withered appearance. Watch how your plant appears after a thorough soak. What is that like right now? Because every plant is unique, pay attention to what yours is now telling you.
Choosing your water
I’ll admit that for a long time, my air plants consumed more expensive water than I did. While my collection grew, I would tirelessly transport containers of purified water for them to enjoy. Tillandsia are accustomed to rainwater that has a pH balance and the ideal ratio of nutrients. The perfect balance is provided by well-filtered water, and I would even conduct my own PH testing to make sure the water was properly balanced between acidic and alkaline.
Tap water frequently contains high levels of chlorine and elements like calcium that can clog the delicate leaves of air plants. Interestingly, distilled water kills air plants by removing all of their nutrients through osmosis. Reverse osmosis systems are frequently used by nursery producers to guarantee that their plants receive the best water and produce the greatest outcomes.
But after many years and painful arms, I decided that my plants needed to become more resilient because I can no longer stand it. I turned on the hose and haven’t turned around since. However, I always make sure to take all of my tillandsia outside when it rains so they can take a lovely, refreshing shower. For similar advantages, you can utilize spring water or pond water.
Tip: Tap water’s chlorine levels drop after about 15 minutes. Before adding your air plants, try filling your soaking bin with water and waiting for this to happen.