I frequently receive queries concerning caring for air plants that are kept in glass globes because they have become so popular. To enjoy your plant in a glass enclosure for many years, follow these few instructions. If you’re seeking for glass globes, our shop has a wide variety of unusual patterns.
- The more attention you can provide your plant, the bigger the globe.
- When you initially get your plant, give it a 20 to 30-minute bath. Keep an eye on the size and color to determine how content the plant is. Consider this “image” constantly.
- Before inserting your plant into the globe, let it almost entirely dry out.
- Every 4-5 days, mist your plant with one spray for small globes, two or three sprays for globes 3-5 inches in diameter, and more if the plant is in a wide open globe. The objective is to estimate the drying time; the longer the plant can retain moisture, the smaller the globe and less circulation. Overwatering will cause the plant to perish.
- Do you recall how your plant seemed after soaking? If it no longer has that cheerful, healthy appearance, remove it, soak it for 30 to 60 minutes, shake, and let it almost completely dry before replacing in the globe.
- Place your globes away from windows or other areas where they will receive direct sunlight. Keep in mind that the glass will make the heat and sunlight more intense. Some plants may even grow in low to moderate light, though indirect light is preferred.
How Much Light Does an Air Plant Need?
Air plants require strong, indirect light to grow. Good possibilities are rooms with windows that face the south or east because the sun will shine brightly in these areas for the majority of the day. As long as the plant is put close to the window and the window is not covered by trees or an adjacent apartment building, rooms with North-facing windows also perform effectively. Western light typically arrives later in the day and has a tendency to be quite warm and powerful. Take care not to burn your air plant!
The air plant will generally withstand more light as the humidity level in your area increases. This means that you should plan to spritz your air plant more frequently, such as twice a week or even every day, if you’re placing it where it will get a lot of light. An air plant will thrive in a bright bathroom or bustling kitchen since the humidity from your shower or boiling water will take care of the majority of plant misting for you.
Air Plants and Artificial Light
A lot of customers ask us if they can put their air plant in a basement or office where there won’t be any windows for natural light. The answer is yes, but there are a few particular guidelines to follow to guarantee the success of your plant.
Fluorescent light must be full-spectrum. These plants can’t photosynthesize in the kind of light that regular incandescent bulbs produce. Place your Tillandsia no more than three feet from the source of light. Additionally, if you plan to use fluorescent lighting, the plants will require at least 12 hours every day.
We advise purchasing a dedicated bulb for your plant (such as a Gro-Lux, Repta-Sun, or Vita-Lite) and setting it on a 12-hour timer if you live in a basement or wish to keep an air plant in your office to ensure that it receives the proper amount of light to survive.
Sand, rocks, and dried wood arranged in a shallow dish make a wonderful air plant display.
The benefits of misting for air plants
The final technique in our series on watering air plants is misting, which you can employ in between regular soaking or immersing. Read more in our earlier blog posts to learn more about the dunk method and soaking.
If you notice that your plant’s leaves are starting to seem a bit dry or if you live in a dry region with low air humidity, misting is an excellent approach to give it a little additional hydration. Misting is probably not enough water for your plant to grow, therefore you shouldn’t utilize this method as its only supply of water.
The T. tectorum, which has a lot of trichomes, is an exception to this rule and prefers misting to soaking or submerging. In a temperate area, you might only need to mist once a month with one of these guys, or once a week in a hotter environment.
In contrast to other plants with bigger leaves, plants with wispy leaves such the T. ionantha, T. andreana, or T. fuchsii v gracilis may require misting more regularly in addition to weekly watering.
- It’s easy to spritz plants; just use a spray bottle or hose attachment set to the “mist” setting. Make sure the entire plant gets soaked before misting. As previously mentioned, if this is their sole source of water, this is not the greatest approach for watering. If you mist your plants, remember to additionally soak or dip them once a week at the very least.
A useful generalization to remember is that a healthy air plant will have leaves that are wide open, whereas a dehydrated air plant would have leaves that curl inward. Bring on the mist if you see that your plant is starting to appear a touch dry between your regular waterings!
Do air plants need to be misted or soaked?
Most air plants with plenty of trichomes (xeric plants) should be often misted or soaked, whereas mesic plants, which have bright green leaves and less trichomes, prefer to be drenched only once a week. In our blog post Mesic Vs Xeric Air Plants, we go into further detail regarding the differences between Xeric and Mesic plants. However, there is one exception to this rule: air plants with bulbous bases, even those with bright green, smooth leaves, should frequently not be wet for extended periods of time as well. Because of water buildup in their bulbous bases, plants are susceptible to internal rot.
Instead of being wet, Xerographica air plants should be sprayed or submerged. These plants, which are xeric in nature, are indigenous to arid areas. These plants can survive more sun and less water. A xerographica should be submerged in a basin or pail of water, then gently shaken to let the water drip off the leaves. To prevent water from getting stuck in the leaves, let the item dry upside-down.
The Tillandsia tectorum is an air plant that you shouldn’t wet because it has a lot of fuzzy leaves. The tectorum’s large trichomes on its leaves aid in absorbing moisture from the surrounding atmosphere. These plants have evolved to survive without much precipitation and are naturally found in arid areas of Ecuador and Peru. Depending on how hot and dry it is where you live, we advise spraying these guys every other week or so. They also favor open air and strong light.
The distinctive feature of bulbous air plants is that they have what are known as “pseudobulbs.” In the natural, ant colonies construct their nests inside of these hollow onion-shaped bulbs, which are essentially hollow themselves. When watering these plants, especially when soaking them, exercise caution. These so-called pseudobulbs are susceptible to water intrusion, which can cause the plant to rot from the inside out. You can either submerge them in water and shake off the extra afterward, or you can hold them under running water while avoiding their bases. The T. caput medusae, T. bulbosa, T. pruinosa, T. pseudobaileyi, T. butzii, and T. seleriana plants are included in this group.
Another reason not to soak T. pruinosa and T. seleriana is that they both have a lot of trichomes. They could decay from soaking because of too much water.
You shouldn’t immerse air plants with delicate leaves like T. fuchsii v gracilis and T. andreana. These plants benefit more from light misting or rapid dunks. You may need to spritz these plants as frequently as every couple of days to make sure they are receiving enough water because of their thin, wispy leaves, which can cause them to dry out more quickly between waterings.
The Tillandsia magnusiana should be misted or dipped rather than soaked because it has a lot of trichomes. These plants’ form and trichome content can make them more prone to decay.
When watering air plants that are in bloom, exercise caution to avoid getting the blossom itself wet. While it would be acceptable to soak the plant’s bottom leaves, we frequently advise pouring water over them or immersing them to avoid wetting the blossom. A bloom that has been moist for a long time may develop rot, which may eventually spread to the leaves and kill the plant.
How often should my air plant be soaked?
It is preferable to soak your air plants in a bowl of water for 20 to an hour once per week to 10 days. Totally submerge the plant. Even though they are constantly wet in nature, if your plant is in bloom, you might want to keep the bud above the water to avoid disturbing it.
How can I determine the health of my air plant?
Unique and hassle-free indoor plants, air plants (Tillandsia) add significant visual charm to your home. These unique plants come in a variety of sizes, have health benefits for your home during the photosynthesis process, and need very little upkeep from you, which appeals to busy professionals. How can you know whether your air plant is healthy considering that they require less maintenance than other plants?
Hydration of the plant is essential to avoid underwatering and determine the health of your air plant. To determine whether the plant is getting too much or not enough moisture, regularly look for discolored leaves or dry or wet rot. An air plant is in good health if it blooms and produces fluff.
There are numerous techniques to determine whether your air plant is healthy, and the majority of them only require a visual examination. They could quickly get ill by doing some unexpected activities. Continue reading to learn more about 11 quick ways to assess the general health of your air plant.
How long does an air plant live?
Perennial plants are tillandsias, also referred to as air plants. According to the source, they have a lifespan of between two and five years, which indicates that they normally survive longer than two years.
The type of air plant and the growing conditions have an impact on how long they live, though. They reside in deserts, on various surfaces, and on tree branches in their natural habitat (other surfaces they can grow on).
Air plants only experience one flowering during their existence, which marks the culmination of their development and maturity.
Depending on the species, the flowers might remain in bloom for a number of months. However, the air plant will begin to die when the blossoms start to wilt and fade. Air plants develop pups or offsets before they die to carry on the same growth cycle.
Despite the mother plant dying, you can take the pups out and raise them separately. Separating the pups from the mother is referred to as “division is a method of air plant propagation.
As an alternative, you might leave those puppies grouped together ” (also known as “tillandsia balls).
How long do air plants need to be dry?
There may be affiliate links in this content. Your purchases generate a small commission for us. Additional Affiliate Policy
An air plant’s best formula for success is proper care. Despite the fact that air plants are among the easiest indoor plants to care for, it is still preferable to give them some attention. Taking care of your air plants include giving them the water they require, the right amount of light, appropriate airflow, and fertilizers like orchid plant food to improve their health.
Without water, air plants may survive for two weeks. Additionally, the plant’s health is compromised even if it is still alive. Regarding the recommended watering regimen, you should bathe your air plants in water at least once every two weeks and spritz them once a week.
How do I induce flowering in my air plant?
Try to be patient and caring with your air plants because they tend to develop quite slowly at first. Over time, you’ll discover that they are incredibly tolerant plants that benefit from just a few simple instructions.
- glaring indirect lighting
- Every once or twice a week, immerse the entire plant for 5–10 minutes in room temperature water. After a bath, let plants to dry for at least three hours by hanging them upside-down on a towel.
- For better blooms and the growth of your daughters, fertilize every two months with an epiphytic, bromeliad, or non-urea nitrogen fertilizer (pups).
Origins
Tillandsias are a member of the broad bromeliad family. Southern North America, as well as temperate regions of Central and South America, are the natural habitats of the Tillandsia genus. According to
The plant species may grow in arid to tropical environments like mountains, deserts, and rain forests. The thick-leafed types are found in dry places, while the thinner-leafed varieties grow there.
in regions where drought is more likely. This is a crucial factor to take into account when purchasing an air plant because it will define the plant’s hardiness and the precise watering requirements.
What is an Epiphyte?
We adore the fact that air plants are epiphytes since they are totally unique and adaptable! The mosses, orchids, bromeliads, and Spanish moss are a few well-known examples (which is also of the genus Tillandsia.) The term “epiphyte” simply describes a plant that grows without soil and acquires its nutrition by attaching to another plant or structure without the use of parasites. They will develop roots in order to tie themselves to something, but they are merely there for stability and support. If the roots of your plants start to go out of control, you may always cut them back with a pair of scissors without harming the plant. An air plant is a distinctive and eye-catching feature in the home because of its capacity to simply “hang out,” which opens up countless design possibilities.
Basic Care
Tillandsias grow on trees and telephone lines in the wild, where they are slightly shielded from the hot sun. Allow your plant to receive strong indirect light indoors; direct sunlight, especially in the summer, will burn the plant’s margins. Simply pinch off any browning leaves you see close to the stem’s base; this will encourage new development. Tillandsias have developed a different method because they cannot acquire nutrition from their roots. They do this brilliantly by making use of Trichomes, tiny structures on their leaves. The plant can absorb nutrients and moisture from the air, rain, and occasionally collecting debris thanks to these tiny hair-like structures. This is essential to an airplant’s survival, particularly in regulating the plant’s water retention. Nice, huh? You can see why Tillandsia’s health depends on a proper watering schedule.
WATERING
The ideal time to water your air plant is in the morning, when you can immerse it in a water bath. Stomata on air plants open during night, allowing for the flow of gases and the evaporation of oxygen. Watering early in the day will help to avoid interfering with this crucial procedure. Although you can sprinkle your Tillandsia, this won’t provide enough moisture over time, and the plant’s vascular cells may start to degenerate.
Your air plant requires either weekly or biweekly soaks, depending on the type and thickness of the leaves. You must be careful not to use distilled water or water with a high salt concentration when doing this. Both of these are deficient in essential minerals and nutrients that your plant need and will eventually kill it after only a few waterings. Water from ponds or the rain is favored, but it might be challenging for most people to find. It is sufficient to use filtered tap water or tap water that has been allowed to sit at room temperature for at least 12 hours. Make sure the entire plant is submerged in the water; turning it upside down frequently prevents floating. Give the air plant about 40 to an hour in its soaking. Most crucial, allow your plants to soak for at least 3 hours on a towel outside of their containers. The worst error that humans commit is this. Keep in mind that air plants are accustomed to extremely dry environments where they have the chance to dry off in nature. The moisture will be trapped in the plant’s meristem (base region) if you immediately put it back in its jar or container, which will inevitably result in rot.
If you have an air plant that blooms, the bloom will typically last two to three weeks! Only partially submerge the flowering Air plant during this time because getting the flower wet will unfortunately limit the bloom length.
Give a water bath for 12 hours the night before you go if you are taking a trip that will last more than two weeks. Once home, soak for another 12 hours before airing out. Additionally, there are a few “extras” you can carry out to encourage more blooms and quicker growth.
FERTILIZING
While fertilizing your tillandsia might help it grow and bloom more quickly, be careful not to overdo it. If you have access to rain or pond water, you can skip this step. We advise fertilizing just once every two months at most. You can purchase typical bromeliad fertilizer and add it to the water in your bath. In the absence of urea-based nitrogen, which is advised only for plants that are kept in soil, use 1/4 of the recommended amount of any water-soluble fertilizer.
NEW GROWTH”PUPS
Every air plant will only ever blossom once in its lifetime, which is sad but real. Trimming off the entire blossom stalk after the flower has dried up will encourage “pupping. Tillandsia” Pups are only new plants growing at the plant’s root. About two months after the mother plant or main base of the plant has completed blooming, they usually start to grow. New pups can be pulled off the mother plant by twisting them, or you can keep them on because they start to group together and the mother plant will eventually wither and be replaced by the puppies. Before you remove the pups, make sure to wait until they are between 1/3 and 1/2 the size of the mother plant.