For the best care, your plants should be watered 2-3 times each week in addition to once every week. Every 2-3 weeks, a 2-hour bath should be taken. You will need to water or mist your plants more frequently if you live in a hotter, drier region. Your plant’s leaves will start to feel heavier and more wet after watering, and they will be softer and lighter in color when they require more water. Dehydration may be indicated by leaves that are wrinkled or rolled.
How to Water an Air Plant
The most challenging aspect of caring for air plants is watering them. Some individuals use misting religiously, others immerse their air plants, while yet others utilize a mix of misting and soaking.
In our experience, watering air plants is challenging because the plant’s requirements differ significantly depending on the environment. Additionally, some species need particular care. Assessing your environment is the first step in watering your air plant. How much light is reaching your plant? What’s the temperature like inside your house right now? Is there a lot of dry air there (is your plant close to a heater or fireplace)? Is it also really humid?
Following your responses, you can modify the air plant watering schedule to meet your specific requirements. Here is what we suggest as a place to start:
- Every one to two weeks, give your air plant a 5- to 10-minute soak in room-temperature tap water (or, if you can get it, rainwater or pond water).
- Once your plant has soaked, gently shake off any extra water. It should be placed on a towel upside down in a well-lit area. This is very crucial. If extra water is allowed to stand, air plants will quickly decay.
- The plant should be able to dry completely in 3 hours once the soaking process is finished. More time than this could cause your plant to decay. Try putting it somewhere brighter with better airflow to encourage quicker drying.
- Mist your plant well once a week (instead of watering it). Make sure the entire surface is saturated (but not so much that there is water dripping down into the plant).
- You need to water more when the air is hotter and dryer (summer, early fall). Your air plant will require less water during the cooler and more humid seasons (winter and spring). Just be mindful of your plant because heaters and fires dry out the air.
- Water everything in the morning. Evening sopping or sprinkling interferes with the plants’ ability to breathe at night and prolongs the drying process.
Is My Air Plant Getting Enough Water?
The tops of your air plant’s leaves may turn brown or crispy if you’ve been neglecting to water it. When an air plant is under-watered, its leaves’ inherent concavity tends to become more pronounced.
Unfortunately, it’s frequently too late to save an overwatered air plant. Your plant has certainly succumbed to rot if the base of the plant turns dark or black and leaves are falling out or off from the center.
Regarding temperature, air plants are fairly tolerant. They thrive between 50 and 90 degrees Fahrenheit. The ideal temperature difference between daytime and nighttime is roughly 10 degrees.
To maintain your air plant healthy, include orchid or specific air plant fertilizer in your watering routine once or twice a month. Simply sprinkle some in your water, then carry on as usual. Your air plant will blossom and propagate if you fertilize it (or pup — more on this later)
Do my air plants need to be misted?
The final technique in our series on watering air plants is misting, which you can employ in between regular soaking or immersing. Read more in our earlier blog posts to learn more about the dunk method and soaking.
If you notice that your plant’s leaves are starting to seem a bit dry or if you live in a dry region with low air humidity, misting is an excellent approach to give it a little additional hydration. Misting is probably not enough water for your plant to grow, therefore you shouldn’t utilize this method as its only supply of water.
The T. tectorum, which has a lot of trichomes, is an exception to this rule and prefers misting to soaking or submerging. In a temperate area, you might only need to mist once a month with one of these guys, or once a week in a hotter environment.
In contrast to other plants with bigger leaves, plants with wispy leaves such the T. ionantha, T. andreana, or T. fuchsii v gracilis may require misting more regularly in addition to weekly watering.
- It’s easy to spritz plants; just use a spray bottle or hose attachment set to the “mist” setting. Make sure the entire plant gets soaked before misting. As previously mentioned, if this is their sole source of water, this is not the greatest approach for watering. If you mist your plants, remember to additionally soak or dip them once a week at the very least.
A useful generalization to remember is that a healthy air plant will have leaves that are wide open, whereas a dehydrated air plant would have leaves that curl inward. Bring on the mist if you see that your plant is starting to appear a touch dry between your regular waterings!
An air plant can you overwater it?
More air plants perish from overwatering than from underwatering. The telltale indicator is when the bottom of your air plant appears brown and slimy. Instead of submerging or soaking your air plants, try misting them with a spray bottle. In between waterings, make sure your air plant has completely dried out. Only mist your air plants 1-3 times each week. Less can be more. It’s crucial to dry your air plant within four hours because they can become overwatered if they don’t. Get a fan for your air plant if it doesn’t dry after four hours of watering, and water it less the following time.
2. Insufficient air causes air plants to lack nutrients. It results in “dry rot.” There won’t be enough food if there isn’t enough air movement around air plants. Keep in mind that air plants consume nourishment. Terrariums and small, quiet locations like toilets shouldn’t be used to house air plants because there isn’t enough airflow in these areas. Instead, pick a place with lots of natural light and fresh air, such as close to an open window, in a large room with other rooms adjacent to it, in a courtyard or on a veranda. Lack of air flow can also lead to overwatering because it delays the air plants’ ability to fully dry up. The problem with air plant holders is dry rot. Your air plant may develop dry rot on the area of the plant that has poor air flow from the planter if the base is placed in a planter, such as a pot, hanger, or pouch, that has no ventilation. Before you notice the rot, it will have spread and your air plant will be dead.
3. Lack of Light – To produce their own nourishment, air plants require light. If your air plants are indoors, make sure they are one meter or less from a window. They’ll definitely perish from lack of sunshine if you put them in a dark hallway.
4. Too much direct sunlight will burn your plant or severely dry the foliage. Generally speaking, 45 minutes of moderate early morning or late afternoon direct sunshine is acceptable. However, it is advised to use filtered sunlight or total shade.
5. Frost – Because they are sensitive to the cold, air plants. They dislike temperatures below 0 degrees Celsius. If you live in a chilly climate, you might want to think about bringing your air plants inside during the winter.
6. Humidity – some types of air plants like it when the humidity is high. If the leaves of your air plant are too curled, the air may be too dry for the plant. Spraying or soaking air plants in water just isn’t enough moisture if the air is too dry. Consider soaking your air plant for 30 minutes each week in addition to your regular spraying if you believe it died from low humidity. or daily spray your plant. Additionally, you can put the air plant on a piece of driftwood or any object that can hold moisture. Another choice is to make a bed using a mixture of 50% perlite and 50% orchid potting mix. Spray the mixture every time you spray your plants. Your air plants might even drop roots into the mixture since they are so content.
7. Rust – Your air plant will develop dead areas as a result. Keep your plant away from anything that is rusty. Regular wire might rust in the future. For mounting air plants, use plastic-coated or galvanized wire.
8. Copper wire is well recognized for killing air plants. Copper is poisonous to air plants, particularly when it is regularly moist.
9. It’s typical for the mother air plant to pass away. Air plants develop, blossom, give birth to pups, and then go extinct. If your air plant has already bloomed and produced pups, it’s entirely possible that she is about to die. Don’t get rid of her just yet. Before she leaves, she might surprise you by bearing even another pup.
A dead air plant you purchased from us? Give air plants another go with this 20% off coupon. To receive 20% off your upcoming order of air plants, use the promo code AIRDEAD at checkout.
Mist
Spraying air plants with water from a bottle on occasion is beneficial. Your air plants will enjoy a cool mist, especially if you live in a dry environment. Remember that you shouldn’t use this technique to water your air plants exclusively. The trichomes won’t be able to get all the water they require from misting on their own.
Although most air plants require more watering than misting, Tillandsia tectorum is an unique exception. This air plant is native to the Andes mountains, where the hard environment has allowed the plants to evolve in a special way. Due to an abundance of trichomes that protect them from the sun’s rays, they appear fuzzy. The trichomes also maximize the little moisture that is present.
This indicates that misting—rather than soaking or dunking—is the optimum method of hydrating these air plants, which also benefit from direct sunlight.
Your climate will determine how often you need to water T. tectorum. If your area is humid, spraying the plant thoroughly once every three weeks will do. You must sprinkle your T. tectorum once a week in dry regions.
Depending on your climate, thoroughly mist a T. tectorum once a week to once every three weeks. Never submerge a T. tectorum or wet it.
Dunk
Giving your air plants a brief dunk will keep them going for the day until you have time to give them a full drink if you are in a rush and are aware that they are thirsty. You can swiftly immerse an air plant in water once or multiple times by doing so. Alternately, place the plant under the sink’s faucet.
Air plants should be promptly and entirely submerged in water before being dunked. Quick dip time for this T. tricolor v melanocrater.
Soak
Nothing works better than a thorough soaking to truly hydrate an air plant. This can be done by placing the entire plant in a dish that has been filled with tepid water. You might use a sink or even a tub if you have a lot of air plants.
Allow your air plants to soak in a water bath for about an hour once a week. Make sure to modify this timetable to reflect your local climate. Your plants might just require 20 minutes if the humidity where you reside is extremely high. It can be necessary to soak for up to 4 hours in dry conditions.
Watering Air Plant Arrangements
It can be a little challenging to remove an air plant that has been affixed to a display, but it is definitely achievable. Use your faucet instead of soaking the entire arrangement in a bowl of water.
Hold the air plant under a gentle stream of lukewarm water, keeping the wood or other surface it is bonded to out of the water. Allow the water to soak the plant for a while.
Hold the air plant under the faucet for a few minutes while using lukewarm water to keep the driftwood dry. A T. abdita is shown above attached to driftwood.
Hold the display after watering to ensure that any extra water runs off and does not collect inside the plant.
If the air plants can be easily removed and are not permanently attached to the display. Remove them from the arrangement and hydrate them by soaking the plant in a bowl of water, just like you would any other air plant.
Drying
Allowing your air plants to dry up completely can maintain their long-term health and longevity. After watering your plants, allow them to rest for around 4 hours on their side with plenty of airflow. With this drying technique, water won’t build up inside the plant and cause it to decay. Return the plants to their display once 4 hours have passed. You cannot exaggerate how crucial it is to let your plants drain and dry off.
Place air plants on their sides or upside-down so that any excess water may drain away from the plant. This will help the plant to dry. For this, you could make use of a dish drying rack, a colander, or a towel.
Vacation
Taking a trip? No issue. Without you, your air plants will remain alive. Soak your air plants for 12 hours right before you leave. Soak them once more for 12 hours when you get home. This strategy works well for a two-week trip. If it takes longer, you’ll need to enlist the aid of a friend or neighbor.
Soak and Dry
You now know how to water your air plants correctly. Your air plants won’t decay from too much moisture accumulation or crumble in your palm from dehydration. You can do this. Rinse and dry. I’m done now!
How can I tell whether my air plant is content?
Under-watering is the main reason why air plants die in new owners’ care. The overwatering that follows is a close second. According to a longstanding myth, these plants draw all the water they need from the atmosphere and don’t even need to be watered at all. While living in a climate similar to the Tillandsia’s natural environment and having them outside, this may be true, for the rest of us, watering is necessary. No need to worry; your plants will thrive if you follow these easy watering instructions. Pick one of the techniques listed below to water your plants like a pro.
The easiest approach to keep your air plant happy, particularly indoors, is to submerge it. People are frequently shocked to learn that you can completely submerge an aerial plant, but they adore it nonetheless! The only effective method for completely rehydrating your air plant is this. When water enters the plant’s root through the entire leaf surface, a stunning metamorphosis occurs. Curly leaves will frequently straighten, and although your Tillandsia won’t have meaty leaves like succulents, there will be a distinct fullness after soaking.
THE AMOUNT A dry tillandsia can benefit greatly from even a brief 30-minute bath, although they are capable of holding their breath for up to 12–24 hours. Our general rule is to soak for 6–12 hours once every week. Ours normally soaks for 12 hours or so. Even without losing too many of them, we’ve occasionally forgotten about them. Some xeric species, such as Tectorum and Xerographica, should be handled with caution. Since they are more delicate, they favor spraying.
Another method of watering your air plant is to spray it until it is completely saturated. It’s important to keep in mind that this isn’t a light sprinkling. For optimal watering, your plant needs to be totally submerged. While spraying your air plant is a good technique to hydrate it, you’ll need to do it much more frequently than soaking, which results in a more thorough rehydration.
THE AMOUNT 2-3 times each week, spray until completely saturated. This will be greater if you reside in Arizona and less if you reside in Hawaii. Whether your plant is indoors or outdoors, as well as the type of light it receives, are the two most crucial aspects to consider when deciding when and how much water to apply. More water will be appreciated if there is a lot of sun. Regular watering is essential indoors, where there is heat, air conditioning, and generally dry circumstances.
Watch the leaves of your plants to see if they are showing signs of thirst. A healthy white fuzz really indicates that your plant is healthy and not necessarily drying out because curly leaves are drier. Other indicators that you are under-watering include brown leaf tips and a generally withered appearance. Watch how your plant appears after a thorough soak. What is that like right now? Because every plant is unique, pay attention to what yours is now telling you.
Choosing your water
I’ll admit that for a long time, my air plants consumed more expensive water than I did. While my collection grew, I would tirelessly transport containers of purified water for them to enjoy. Tillandsia are accustomed to rainwater that has a pH balance and the ideal ratio of nutrients. The perfect balance is provided by well-filtered water, and I would even conduct my own PH testing to make sure the water was properly balanced between acidic and alkaline.
Tap water frequently contains high levels of chlorine and elements like calcium that can clog the delicate leaves of air plants. Interestingly, distilled water kills air plants by removing all of their nutrients through osmosis. Reverse osmosis systems are frequently used by nursery producers to guarantee that their plants receive the best water and produce the greatest outcomes.
But after many years and painful arms, I decided that my plants needed to become more resilient because I can no longer stand it. I turned on the hose and haven’t turned around since. However, I always make sure to take all of my tillandsia outside when it rains so they can take a lovely, refreshing shower. For similar advantages, you can utilize spring water or pond water.
Tip: Tap water’s chlorine levels drop after about 15 minutes. Before adding your air plants, try filling your soaking bin with water and waiting for this to happen.