I frequently receive queries concerning caring for air plants that are kept in glass globes because they have become so popular. To enjoy your plant in a glass enclosure for many years, follow these few instructions. If you’re seeking for glass globes, our shop has a wide variety of unusual patterns.
- The more attention you can provide your plant, the bigger the globe.
- When you initially get your plant, give it a 20 to 30-minute bath. Keep an eye on the size and colour to determine how content the plant is. Consider this “image” constantly.
- Before inserting your plant into the globe, let it almost entirely dry out.
- Every 4-5 days, mist your plant with one spray for small globes, two or three sprays for globes 3-5 inches in diameter, and more if the plant is in a wide open globe. The objective is to estimate the drying time; the longer the plant can retain moisture, the smaller the globe and less circulation. Overwatering will cause the plant to perish.
- Do you recall how your plant seemed after soaking? If it no longer has that cheerful, healthy appearance, remove it, soak it for 30 to 60 minutes, shake, and let it almost completely dry before replacing in the globe.
- Place your globes away from windows or other areas where they will receive direct sunlight. Keep in mind that the glass will make the heat and sunlight more intense. Some plants may even grow in low to moderate light, though indirect light is preferred.
How Much Light Does an Air Plant Need?
Air plants require strong, indirect light to grow. Good possibilities are rooms with windows that face the south or east because the sun will shine brightly in these areas for the majority of the day. As long as the plant is put close to the window and the window is not covered by trees or an adjacent apartment building, rooms with North-facing windows also perform effectively. Western light typically arrives later in the day and has a tendency to be quite warm and powerful. Take care not to burn your air plant!
The air plant will generally withstand more light as the humidity level in your area increases. This means that you should plan to spritz your air plant more frequently, such as twice a week or even every day, if you’re placing it where it will get a lot of light. An air plant will thrive in a bright bathroom or bustling kitchen since the humidity from your shower or boiling water will take care of the majority of plant misting for you.
Air Plants and Artificial Light
A lot of customers ask us if they can put their air plant in a basement or office where there won’t be any windows for natural light. The answer is yes, but there are a few particular guidelines to follow to guarantee the success of your plant.
Fluorescent light must be full-spectrum. These plants can’t photosynthesize in the kind of light that regular incandescent bulbs produce. Place your Tillandsia no more than three feet from the source of light. Additionally, if you plan to use fluorescent lighting, the plants will require at least 12 hours every day.
We advise purchasing a dedicated bulb for your plant (such as a Gro-Lux, Repta-Sun, or Vita-Lite) and setting it on a 12-hour timer if you live in a basement or wish to keep an air plant in your office to ensure that it receives the proper amount of light to survive.
Sand, rocks, and dried wood arranged in a shallow dish make a wonderful air plant display.
Is misting your air plants necessary?
The final technique in our series on watering air plants is misting, which you can employ in between regular soaking or immersing. Read more in our earlier blog posts to learn more about the dunk method and soaking.
If you notice that your plant’s leaves are starting to seem a bit dry or if you live in a dry region with low air humidity, misting is an excellent approach to give it a little additional hydration. Misting is probably not enough water for your plant to grow, therefore you shouldn’t utilise this method as its only supply of water.
The T. tectorum, which has a lot of trichomes, is an exception to this rule and prefers misting to soaking or submerging. In a temperate area, you might only need to mist once a month with one of these guys, or once a week in a hotter environment.
In contrast to other plants with bigger leaves, plants with wispy leaves such the T. ionantha, T. andreana, or T. fuchsii v gracilis may require misting more regularly in addition to weekly watering.
- It’s easy to spritz plants; just use a spray bottle or hose attachment set to the “mist” setting. Make sure the entire plant gets soaked before misting. As previously mentioned, if this is their sole source of water, this is not the greatest approach for watering. If you mist your plants, remember to additionally soak or dip them once a week at the very least.
A useful generalisation to remember is that a healthy air plant will have leaves that are wide open, whereas a dehydrated air plant would have leaves that curl inward. Bring on the mist if you see that your plant is starting to appear a touch dry between your regular waterings!
Do air plants need to be misted or soaked?
Most air plants with plenty of trichomes (xeric plants) should be often misted or soaked, whereas mesic plants, which have bright green leaves and less trichomes, prefer to be drenched only once a week. In our blog post Mesic Vs Xeric Air Plants, we go into further detail regarding the differences between Xeric and Mesic plants. However, there is one exception to this rule: air plants with bulbous bases, even those with bright green, smooth leaves, should frequently not be wet for extended periods of time as well. Because of water buildup in their bulbous bases, plants are susceptible to internal rot.
Instead of being wet, Xerographica air plants should be sprayed or submerged. These plants, which are xeric in nature, are indigenous to arid areas. These plants can survive more sun and less water. A xerographica should be submerged in a basin or pail of water, then gently shaken to let the water drip off the leaves. To prevent water from getting stuck in the leaves, let the item dry upside-down.
The Tillandsia tectorum is an air plant that you shouldn’t wet because it has a lot of fuzzy leaves. The tectorum’s large trichomes on its leaves aid in absorbing moisture from the surrounding atmosphere. These plants have evolved to survive without much precipitation and are naturally found in arid areas of Ecuador and Peru. Depending on how hot and dry it is where you live, we advise spraying these guys every other week or so. They also favour open air and strong light.
The distinctive feature of bulbous air plants is that they have what are known as “pseudobulbs.” In the natural, ant colonies construct their nests inside of these hollow onion-shaped bulbs, which are essentially hollow themselves. When watering these plants, especially when soaking them, exercise caution. These so-called pseudobulbs are susceptible to water intrusion, which can cause the plant to rot from the inside out. You can either submerge them in water and shake off the extra afterward, or you can hold them under running water while avoiding their bases. The T. caput medusae, T. bulbosa, T. pruinosa, T. pseudobaileyi, T. butzii, and T. seleriana plants are included in this group.
Another reason not to soak T. pruinosa and T. seleriana is that they both have a lot of trichomes. They could decay from soaking because of too much water.
You shouldn’t immerse air plants with delicate leaves like T. fuchsii v gracilis and T. andreana. These plants benefit more from light misting or rapid dunks. You may need to spritz these plants as frequently as every couple of days to make sure they are receiving enough water because of their thin, wispy leaves, which can cause them to dry out more quickly between waterings.
The Tillandsia magnusiana should be misted or dipped rather than soaked because it has a lot of trichomes. These plants’ form and trichome content can make them more prone to decay.
When watering air plants that are in bloom, exercise caution to avoid getting the blossom itself wet. While it would be acceptable to soak the plant’s bottom leaves, we frequently advise pouring water over them or immersing them to avoid wetting the blossom. A bloom that has been moist for a long time may develop rot, which may eventually spread to the leaves and kill the plant.
How frequently do you water air plants?
For the best care, your plants should be watered 2-3 times each week in addition to once every week. Every 2-3 weeks, a 2-hour bath should be taken. You will need to water or mist your plants more frequently if you live in a hotter, drier region. Your plant’s leaves will start to feel heavier and more wet after watering, and they will be softer and lighter in colour when they require more water. Dehydration may be indicated by leaves that are wrinkled or rolled.
Do you soak air plants with their tops up?
It is best to provide air plants with water that is rich in minerals and nutrients because they obtain many of their nutrients directly from the water. The best water is rainwater, although spring water is a close second if you don’t have a convenient way to collect rainwater. Alternatively, you might utilise well, lake, or creek water. Never use filtered or distilled water. Less minerals and nutrients are present in distilled and filtered water. Many municipal water systems include fewer minerals and nutrients and more contaminants. If you are concerned about your pH level, air plants enjoy slightly acidic water. The ideal range for alkalinity is between 5.5 and 6.0. Most frequently, tap water from the city is higher than this range, making it unsuitable for air plants. Do not worry yourself too much about PH levels. Any good, pure water would do.
After watering your air plants, thoroughly drying them off is the second most crucial step. To ensure that your air plants completely dry, put them down on a dish towel on their side or upside down. For the larger species like Xerographica, Streptophylla, and Sparkler, this is especially crucial. Within two hours of their bath, they should be completely dry to the touch. Wait until your air plants are completely dry before putting them back in terrariums and vases. If you water your plants and then put them in an enclosure right away, your plant can get rot. Your air plants will be content and healthy if you follow these straightforward watering guidelines.
How can I determine the health of my air plant?
Unique and hassle-free indoor plants, air plants (Tillandsia) add significant visual charm to your home. These unique plants come in a variety of sizes, have health benefits for your home during the photosynthesis process, and need very little upkeep from you, which appeals to busy professionals. How can you know whether your air plant is healthy considering that they require less maintenance than other plants?
Hydration of the plant is essential to avoid underwatering and determine the health of your air plant. To determine whether the plant is getting too much or not enough moisture, regularly look for discoloured leaves or dry or wet rot. An air plant is in good health if it blooms and produces fluff.
There are numerous techniques to determine whether your air plant is healthy, and the majority of them only require a visual examination. They could quickly get ill by doing some unexpected activities. Continue reading to learn more about 11 quick ways to assess the general health of your air plant.
How long do air plants need to be dry?
There may be affiliate links in this content. Your purchases generate a small commission for us. Additional Affiliate Policy
An air plant’s best formula for success is proper care. Despite the fact that air plants are among the easiest indoor plants to care for, it is still preferable to give them some attention. Taking care of your air plants include giving them the water they require, the right amount of light, appropriate airflow, and fertilisers like orchid plant food to improve their health.
Without water, air plants may survive for two weeks. Additionally, the plant’s health is compromised even if it is still alive. Regarding the recommended watering regimen, you should bathe your air plants in water at least once every two weeks and spritz them once a week.
How long does an air plant live?
Perennial plants are tillandsias, also referred to as air plants. According to the source, they have a lifespan of between two and five years, which indicates that they normally survive longer than two years.
The type of air plant and the growing conditions have an impact on how long they live, though. They reside in deserts, on various surfaces, and on tree branches in their natural habitat (other surfaces they can grow on).
Air plants only experience one flowering during their existence, which marks the culmination of their development and maturity.
Depending on the species, the flowers might remain in bloom for a number of months. However, the air plant will begin to die when the blossoms start to wilt and fade. Air plants develop pups or offsets before they die to carry on the same growth cycle.
Despite the mother plant dying, you can take the pups out and raise them separately. Separating the pups from the mother is referred to as “division is a method of air plant propagation.
As an alternative, you might leave those puppies grouped together ” (also known as “tillandsia balls).
Can air plants be overwatered?
More air plants perish from overwatering than from underwatering. The telltale indicator is when the bottom of your air plant appears brown and slimy. Instead of submerging or soaking your air plants, try misting them with a spray bottle. In between waterings, make sure your air plant has completely dried out. Only mist your air plants 1-3 times each week. Less can be more. It’s crucial to dry your air plant within four hours because they can become overwatered if they don’t. Get a fan for your air plant if it doesn’t dry after four hours of watering, and water it less the following time.
2. Insufficient air causes air plants to lack nutrients. It results in “dry rot.” There won’t be enough food if there isn’t enough air movement around air plants. Keep in mind that air plants consume nourishment. Terrariums and small, quiet locations like toilets shouldn’t be used to house air plants because there isn’t enough airflow in these areas. Instead, pick a place with lots of natural light and fresh air, such as close to an open window, in a large room with other rooms adjacent to it, in a courtyard or on a veranda. Lack of air flow can also lead to overwatering because it delays the air plants’ ability to fully dry up. The problem with air plant holders is dry rot. Your air plant may develop dry rot on the area of the plant that has poor air flow from the planter if the base is placed in a planter, such as a pot, hanger, or pouch, that has no ventilation. Before you notice the rot, it will have spread and your air plant will be dead.
3. Lack of Light – To produce their own nourishment, air plants require light. If your air plants are indoors, make sure they are one metre or less from a window. They’ll definitely perish from lack of sunshine if you put them in a dark hallway.
4. Too much direct sunlight will burn your plant or severely dry the foliage. Generally speaking, 45 minutes of moderate early morning or late afternoon direct sunshine is acceptable. However, it is advised to use filtered sunlight or total shade.
5. Frost – Because they are sensitive to the cold, air plants. They dislike temperatures below 0 degrees Celsius. If you live in a chilly climate, you might want to think about bringing your air plants inside during the winter.
6. Humidity – some types of air plants like it when the humidity is high. If the leaves of your air plant are too curled, the air may be too dry for the plant. Spraying or soaking air plants in water just isn’t enough moisture if the air is too dry. Consider soaking your air plant for 30 minutes each week in addition to your regular spraying if you believe it died from low humidity. or daily spray your plant. Additionally, you can put the air plant on a piece of driftwood or any object that can hold moisture. Another choice is to make a bed using a mixture of 50% perlite and 50% orchid potting mix. Spray the mixture every time you spray your plants. Your air plants might even drop roots into the mixture since they are so content.
7. Rust – Your air plant will develop dead areas as a result. Keep your plant away from anything that is rusty. Regular wire might rust in the future. For mounting air plants, use plastic-coated or galvanised wire.
8. Copper wire is well recognised for killing air plants. Copper is poisonous to air plants, particularly when it is regularly moist.
9. It’s typical for the mother air plant to pass away. Air plants develop, blossom, give birth to pups, and then go extinct. If your air plant has already bloomed and produced pups, it’s entirely possible that she is about to die. Don’t get rid of her just yet. Before she leaves, she might surprise you by bearing even another pup.
A dead air plant you purchased from us? Give air plants another go with this 20% off coupon. To receive 20% off your upcoming order of air plants, use the promo code AIRDEAD at checkout.