Your air plant will require routine watering. It’s a common fallacy that these plants can survive indoors or in gardens without irrigation. Water is essential unless your airplants are growing outside in a climate that closely resembles their natural home. There are several fundamental rules one may abide by to keep their Tillandsia happy, even though your particular environment and the species being grown have an impact on watering.
For indoor cultivation, we advise immersing your airplant for 6–12 hours once every 7–10 days. Make sure there are no soap or chemical residues in your soaking container that could harm your plant. Make sure your plant thoroughly dries in 4 hours after soaking. Place the plant in a well-lit area with good airflow, and be sure to shake off any extra water by turning the plant upside down. A little spritz from a water bottle or the steam from your shower is unlikely to satisfy your Tillandsia’s water needs for very long due to the dry air brought on by air conditioning and heat.
The following water qualities are preferred by tillandsia:
1) Rain
2) Refined
3) Allow tap water to stand for 15 minutes (for chlorine to dissipate)
4) Never use distilled water since it depletes nutrients through osmosis, which can kill your plant.
The amount of outside watering depends on your climate. While no irrigation may be needed in a damp, rainy environment, regular watering through spraying or soaking may be necessary in hot, dry conditions.
How frequently do I need to water my air plant?
For the best care, your plants should be watered 2-3 times each week in addition to once every week. A longer, 2-hour soak is recommended every 2-3 weeks. You will need to water or mist your plants more frequently if you live in a hotter, drier region. Your plant’s leaves will start to feel heavier and more wet after watering, and they will be softer and lighter in color when they require more water. Dehydration may be indicated by leaves that are wrinkled or rolled.
Where should air plants be placed?
All air plants are native to tropical regions where freezing temperatures never occur. It’s crucial to keep them at a reasonable temperature without a sweater, right? typically from the 1960s or earlier. Keep them away from windows that are cold in the winter and air conditioner vents.
At least a few hours of bright, indirect sun each day are necessary for air plants to thrive. The optimal placement is between one and three feet from an east or west-facing window, or around two feet from a source of artificial light. They can be exposed to hotter, more direct sun for longer periods of time if you maintain them well-hydrated. Avoid areas that are poorly lit.
How much time do air plants live?
Perennial plants are tillandsias, also referred to as air plants. According to the source, they have a lifespan of between two and five years, which indicates that they normally survive longer than two years.
The type of air plant and the growing conditions have an impact on how long they live, though. They reside in deserts, on various surfaces, and on tree branches in their natural habitat (other surfaces they can grow on).
Air plants only experience one flowering during their existence, which marks the culmination of their development and maturity.
Depending on the species, the flowers might remain in bloom for a number of months. However, the air plant will begin to die when the blossoms start to wilt and fade. Air plants develop pups or offsets before they die to carry on the same growth cycle.
Despite the mother plant dying, you can take the pups out and raise them separately. Separating the pups from the mother is referred to as “division is a method of air plant propagation.
As an alternative, you might leave those puppies grouped together ” (also known as “tillandsia balls).
Do you soak air plants with their tops up?
It is best to provide air plants with water that is rich in minerals and nutrients because they obtain many of their nutrients directly from the water. The best water is rainwater, although spring water is a close second if you don’t have a convenient way to collect rainwater. Alternatively, you might utilize well, lake, or creek water. Never use filtered or distilled water. Less minerals and nutrients are present in distilled and filtered water. Many municipal water systems include fewer minerals and nutrients and more contaminants. If you are concerned about your pH level, air plants enjoy slightly acidic water. The ideal range for alkalinity is between 5.5 and 6.0. Most frequently, tap water from the city is higher than this range, making it unsuitable for air plants. Do not worry yourself too much about PH levels. Any good, pure water would do.
After watering your air plants, thoroughly drying them off is the second most crucial step. To ensure that your air plants completely dry, put them down on a dish towel on their side or upside down. For the larger species like Xerographica, Streptophylla, and Sparkler, this is especially crucial. Within two hours of their bath, they should be completely dry to the touch. Wait until your air plants are completely dry before putting them back in terrariums and vases. If you water your plants and then put them in an enclosure right away, your plant can get rot. Your air plants will be content and healthy if you follow these straightforward watering guidelines.
Should air plants be misted?
Since they grow differently from the majority of other house plants, tillandsias can be challenging for beginners. They take significantly less care than other house plants because they are actually incredibly hardy. The instructions are summarized below, however you can scroll down for much more detailed information.
- They can get by with water misting and the occasional bath as long as the air is not too dry.
- Never plant in the ground.
- Give them filtered, bright light.
- Keep them from being frozen.
- It is necessary to immerse the plant in water for at least 2-3 hours every two weeks if you are growing them indoors where the air is dry.
- You can apply a soaking mist once or twice a week in the summer and once a month in the winter in a shaded or unheated home.
By sprinkling a little bromeliad or orchid fertilizer into your mister, you can fertilize. Here you may find our entire year’s worth of air plant fertilizer.
How Much Light Does an Air Plant Need?
Air plants require strong, indirect light to grow. Good possibilities are rooms with windows that face the south or east because the sun will shine brightly in these areas for the majority of the day. As long as the plant is put close to the window and the window is not covered by trees or an adjacent apartment building, rooms with North-facing windows also perform effectively. Western light typically arrives later in the day and has a tendency to be quite warm and powerful. Take care not to burn your air plant!
The air plant will generally withstand more light as the humidity level in your area increases. This means that you should plan to spritz your air plant more frequently, such as twice a week or even every day, if you’re placing it where it will get a lot of light. An air plant will thrive in a bright bathroom or bustling kitchen since the humidity from your shower or boiling water will take care of the majority of plant misting for you.
Air Plants and Artificial Light
A lot of customers ask us if they can put their air plant in a basement or office where there won’t be any windows for natural light. The answer is yes, but there are a few particular guidelines to follow to guarantee the success of your plant.
Fluorescent light must be full-spectrum. These plants can’t photosynthesize in the kind of light that regular incandescent bulbs produce. Place your Tillandsia no more than three feet from the source of light. Additionally, if you plan to use fluorescent lighting, the plants will require at least 12 hours every day.
We advise purchasing a dedicated bulb for your plant (such as a Gro-Lux, Repta-Sun, or Vita-Lite) and setting it on a 12-hour timer if you live in a basement or wish to keep an air plant in your office to ensure that it receives the proper amount of light to survive.
Sand, rocks, and dried wood arranged in a shallow dish make a wonderful air plant display.
Do air plants grow in size?
The most common queries that air plant owners and potential owners have about their plants are listed below. Please post any further questions you may have about air plants in the comment area below.
Do Air Plants Purify Air?
Air plants are less successful in air filtration than other plants, although they do remove carbon dioxide and some trace chemical pollutants. However, some research imply that they may be useful in clearing the air of pollutants like mercury.
Do Air Plants Grow Bigger?
Depending on the species, your air plant will reach its full size if it is a pup (baby air plant). As was previously mentioned, air plants may grow from two inches to seven feet tall, so do some research on the kind you choose to learn more about how big it will get. An air plant that you purchase at a market is probably fully developed.
Do Tillandsia Die After Flowering?
Unfortunately, most air plant kinds that bloom are elderly and will soon pass away. On the plus side, air plants produce tiny pups before they die that will eventually reach the size of their parents.
Why Do My Air Plants Keep Dying?
The most frequent factor that causes air plants to die is overwatering. They are very susceptible to root rot, which will destroy them, if they are overwatered. Make sure your air plants dry off within three hours of watering to prevent root rot. Underwatering is the second most typical reason, which the plant can generally overcome. See our suggestions below to rejuvenate a dry plant.
How Do You Revive an Air Plant?
Give your plant an extra bath and then continue your regular watering schedule if you notice that you’ve only slightly under-watered it (for example, if the tips of your plant are turning brown or feeling a little dry). The steps listed below can be used to revitalize a brown or very dry plant:
Place the plant and water container in a room with plenty of light and a temperature between 65 and 75 degrees Fahrenheit (1823C).
Repeat the procedure if the plant continues to wilt three days after being soaked, but this time soak it for just three to four hours.
Air plants are wonderful additions to your plant collection and can make wonderful presents for friends who also enjoy plants. Cute air plant jewelry can be made from the tiniest ones. Ingenious crafts like air plant string art and do-it-yourself terrariums may also be made using air plants. Have you thought of a unique way to use your air plant? Tell us in the comments section below!
Can tap water be used to water air plants?
I wanted to go into more detail about this because our Facebook Page gets a lot of questions about how to water air plants. Although tillandsia, often known as air plants, are simpler to maintain than many other plant species, they still need some care and attention, and water is crucial to their general well-being. Here are some frequently asked questions about watering air plants along with our suggestions:
This mostly relies on your climate, where you’re keeping the air plants, the Tillandsia species itself, and the environment in which it naturally grows (learn more about mesic vs. xeric air plants here). Since most of the year is humid where we live in Tampa, Florida, we don’t run the heat in our home as often as our friends in the north do (I’m not trying to pick on them, I swear!). We typically water our plants twice a week, but drier climates require more frequent watering. Depending on the season, you may discover that you need to water your plants less. Additionally, it depends on where you put them at your house or office. The plants will stay more wet in a humid bathroom, but you’ll probably need to water them more frequently if they’re close to an air vent or a heat source. (Note: We don’t advise keeping your plants close to heat sources.)
It should be noted that while humidity might slow down drying, it in and of itself is insufficient for watering.
Again, you should modify your watering practices according to your climate and the species of your air plants, but for the majority of air plants and surroundings, we advise that you immerse your plants in water at least once a week. Use something that allows you to totally submerge the air plants, like a bowl, bucket, or your sink. Give them a lengthier bath for an hour or more every other week if you live in a dry area. Soak for 30 to 60 minutes at least once a week. You might wish to shorten the soaks if you reside in a location with higher humidity or if your air plant is more xeric in nature.
You should allow the air plants to completely dry after soaking. They can either be let to dry with their leaves facing down or turned over and gently shaken. If water is allowed to sit in the leaves, the plants risk rotting. The plants should be placed in an area with sufficient airflow, and they should be able to dry entirely in less than four hours. Before bringing your plants back home, ensure sure they are entirely dry if they are in a globe or terrarium.
You will observe how open and wide the leaves are after soaking your plants, as well as how much more “happy” they seem. A well hydrated air plant should appear like this! You’ll learn over time that if the color starts to look a little dull and the leaves start to close or curl, your tillandsia are thirsty and you should give them another nice wash. Try soaking your air plant for several hours or even overnight if it is really struggling to see if you can rehydrate the plant. Always allow them to totally dry off before soaking or spraying them once more.
Between waterings, you can spray the plants. If you live in a dry region, this might be a terrific method to keep plants healthy and offer them some additional care. However, unless you have one of the few species of air plants that appreciate low moisture, such as T. tectorum (for which we only advocate misting) or T. xerographica, misting is not a replacement for a thorough soak (which we recommend dunking instead of soaking).
When it comes to water, air plants aren’t particularly finicky; most tap water is suitable, although it depends on the water quality in your location. The most nutrient-rich types of water to utilize are rainwater, aquarium water, or pond water. If utilizing one of these types of water, don’t add any more fertilizer. Allow the water to rest for several hours to allow the chlorine to dissolve if you’re using tap water (maybe 24 hours in some areas.)
Use water that is not distilled since it is too “pure” and will deprive the plants of the nutrients they require. Additionally, artificially softened water should not be used since Tillandsia cannot tolerate its high salt concentration.
We advise soaking your air plants in the morning so that they can dry completely over the day. Additionally, air plants utilize the nighttime hours to breathe carbon dioxide, so if they are wet in the evenings, they won’t be able to do so effectively. This method is known as CAM; to learn more about CAM, read our page on how air plants breathe. You can check on them before you go to night and place them back in their terrariums or displays. Some indirect sunlight will help them dry more rapidly.
These are the queries about watering air plants that we encounter the most frequently. Did we respond to yours? If not, just inquire! Need advice on caring for air plants? Visit our page on air plant care.
comments
Regarding watering the plants with blooms, I have a query. How do you water them if, as I understand it, you don’t moisten the bottoms or the blooms? Do you bring all of your indoor air plants inside during the winter? Although it doesn’t get very cold very often where I reside in Largo, Florida, it does occasionally. Since we don’t have snow, I believe the wind to be the main issue with the cold. Please lend me any assistance you can.
I recently purchased an aquarium, and in order to ensure that my three air plants receive continuous moisture in the office, I planned to tie them to a branch and let them sit on top of the tank. Do I still need to sprinkle and soak them as usual if the water that has evaporated from the tank should be plenty for them to receive?
Our well water passes through a water softener, which I should have mentioned in my previous query. They would be set up here if they could just survive on smoke.
Since we live in north-eastern Washington, rain has not been an option for us. Instead, we use well water, which I won’t even drink. I use spring water to water my air plants because I purchase it and drink it. I haven’t had them long, but they seem to be doing fine. Is using spring water for irrigation problematic?
Due to hydration issues, I do not advise attaching air plants to driftwood. In retrospect, it sounds apparent, but I was new to air plants and lost five of my six because the wood kept too much water when I first gave them a soak.