They’ve arrived, yay! Give your plants a nice soak in a water bath (submerged in the water) for around 20 to 30 minutes after you’ve unpacked them and spent enough time admiring their distinctive beauty to give them names. Shake carefully to get rid of any extra water, then dry off in an area with plenty of sunshine and airflow. The steps listed below should be followed to maintain your plants.
Air plants should be kept in areas with bright, indirect sunlight or in places with fluorescent indoor or outdoor lighting. While brief periods of direct sunshine are good, prolonged exposure to hot sun will dehydrate the plants. Try watering your plant every few days if it will be in an area with quite strong light to keep it hydrated.
You do realize that air plants require air to survive? Oh, that’s wrong! Despite not needing soil to develop, air plants really REQUIRE watering. While plants can endure prolonged droughts, if water is too limited they will not grow or thrive and finally die. If you regularly water your plants according to the instructions provided below, they will remain healthy and alive for a long time. The good news is that you shouldn’t worry about these plants’ maintenance requirements because they are incredibly forgiving. There’s no reason to hire a nanny when you go on vacation.
How is an air plant watered?
It is preferable to soak your air plants in a bowl of water for 20 to an hour once per week to 10 days. Totally submerge the plant. Even though they are constantly wet in nature, if your plant is in bloom, you might want to keep the bud above the water to avoid disturbing it.
How to Water an Air Plant
The most challenging aspect of caring for air plants is watering them. Some individuals use misting religiously, others immerse their air plants, while yet others utilize a mix of misting and soaking.
In our experience, watering air plants is challenging because the plant’s requirements differ significantly depending on the environment. Additionally, some species need particular care. Assessing your environment is the first step in watering your air plant. How much light is reaching your plant? What’s the temperature like inside your house right now? Is there a lot of dry air there (is your plant close to a heater or fireplace)? Is it also really humid?
Following your responses, you can modify the air plant watering schedule to meet your specific requirements. Here is what we suggest as a place to start:
- Every one to two weeks, give your air plant a 5- to 10-minute soak in room-temperature tap water (or, if you can get it, rainwater or pond water).
- Once your plant has soaked, gently shake off any extra water. It should be placed on a towel upside down in a well-lit area. This is very crucial. If extra water is allowed to stand, air plants will quickly decay.
- The plant should be able to dry completely in 3 hours once the soaking process is finished. More time than this could cause your plant to decay. Try putting it somewhere brighter with better airflow to encourage quicker drying.
- Mist your plant well once a week (instead of watering it). Make sure the entire surface is saturated (but not so much that there is water dripping down into the plant).
- You need to water more when the air is hotter and dryer (summer, early fall). Your air plant will require less water during the cooler and more humid seasons (winter and spring). Just be mindful of your plant because heaters and fires dry out the air.
- Water everything in the morning. Evening sopping or sprinkling interferes with the plants’ ability to breathe at night and prolongs the drying process.
Is My Air Plant Getting Enough Water?
The tops of your air plant’s leaves may turn brown or crispy if you’ve been neglecting to water it. When an air plant is under-watered, its leaves’ inherent concavity tends to become more pronounced.
Unfortunately, it’s frequently too late to save an overwatered air plant. Your plant has certainly succumbed to rot if the base of the plant turns dark or black and leaves are falling out or off from the center.
Regarding temperature, air plants are fairly tolerant. They thrive between 50 and 90 degrees Fahrenheit. The ideal temperature difference between daytime and nighttime is roughly 10 degrees.
To maintain your air plant healthy, include orchid or specific air plant fertilizer in your watering routine once or twice a month. Simply sprinkle some in your water, then carry on as usual. Your air plant will blossom and propagate if you fertilize it (or pup — more on this later)
How long do air plants need to be dry?
There may be affiliate links in this content. Your purchases generate a small commission for us. Additional Affiliate Policy
An air plant’s best formula for success is proper care. Despite the fact that air plants are among the easiest indoor plants to care for, it is still preferable to give them some attention. Taking care of your air plants include giving them the water they require, the right amount of light, appropriate airflow, and fertilizers like orchid plant food to improve their health.
Without water, air plants may survive for two weeks. Additionally, the plant’s health is compromised even if it is still alive. Regarding the recommended watering regimen, you should bathe your air plants in water at least once every two weeks and spritz them once a week.
They will stay hydrated and have all the moisture they need to perform essential functions like photosynthesis if they are often watered. But what happens if you are unable to water your air plants on time? How long can they go without drinking?
To shed further light on this subject, we have put together this extremely useful post. Are you scared that your air plants will wither while you are away since you plan to be gone from home for a few days? Or perhaps you’re too busy with your schedule to give your air plants the proper amount of water? If so, you should read this article! Learn how long it takes for the absence of water to actually harm your air plants by reading on.
Can tap water be used to water air plants?
I wanted to go into more detail about this because our Facebook Page gets a lot of questions about how to water air plants. Although tillandsia, often known as air plants, are simpler to maintain than many other plant species, they still need some care and attention, and water is crucial to their general well-being. Here are some frequently asked questions about watering air plants along with our suggestions:
This mostly relies on your climate, where you’re keeping the air plants, the Tillandsia species itself, and the environment in which it naturally grows (learn more about mesic vs. xeric air plants here). Since most of the year is humid where we live in Tampa, Florida, we don’t run the heat in our home as often as our friends in the north do (I’m not trying to pick on them, I swear!). We typically water our plants twice a week, but drier climates require more frequent watering. Depending on the season, you may discover that you need to water your plants less. Additionally, it depends on where you put them at your house or office. The plants will stay more wet in a humid bathroom, but you’ll probably need to water them more frequently if they’re close to an air vent or a heat source. (Note: We don’t advise keeping your plants close to heat sources.)
It should be noted that while humidity might slow down drying, it in and of itself is insufficient for watering.
Again, you should modify your watering practices according to your climate and the species of your air plants, but for the majority of air plants and surroundings, we advise that you immerse your plants in water at least once a week. Use something that allows you to totally submerge the air plants, like a bowl, bucket, or your sink. Give them a lengthier bath for an hour or more every other week if you live in a dry area. Soak for 30 to 60 minutes at least once a week. You might wish to shorten the soaks if you reside in a location with higher humidity or if your air plant is more xeric in nature.
You should allow the air plants to completely dry after soaking. They can either be let to dry with their leaves facing down or turned over and gently shaken. If water is allowed to sit in the leaves, the plants risk rotting. The plants should be placed in an area with sufficient airflow, and they should be able to dry entirely in less than four hours. Before bringing your plants back home, ensure sure they are entirely dry if they are in a globe or terrarium.
You will observe how open and wide the leaves are after soaking your plants, as well as how much more “happy” they seem. A well hydrated air plant should appear like this! You’ll learn over time that if the color starts to look a little dull and the leaves start to close or curl, your tillandsia are thirsty and you should give them another nice wash. Try soaking your air plant for several hours or even overnight if it is really struggling to see if you can rehydrate the plant. Always allow them to totally dry off before soaking or spraying them once more.
Between waterings, you can spray the plants. If you live in a dry region, this might be a terrific method to keep plants healthy and offer them some additional care. However, unless you have one of the few species of air plants that appreciate low moisture, such as T. tectorum (for which we only advocate misting) or T. xerographica, misting is not a replacement for a thorough soak (which we recommend dunking instead of soaking).
When it comes to water, air plants aren’t particularly finicky; most tap water is suitable, although it depends on the water quality in your location. The most nutrient-rich types of water to utilize are rainwater, aquarium water, or pond water. If utilizing one of these types of water, don’t add any more fertilizer. Allow the water to rest for several hours to allow the chlorine to dissolve if you’re using tap water (maybe 24 hours in some areas.)
Use water that is not distilled since it is too “pure” and will deprive the plants of the nutrients they require. Additionally, artificially softened water should not be used since Tillandsia cannot tolerate its high salt concentration.
We advise soaking your air plants in the morning so that they can dry completely over the day. Additionally, air plants utilize the nighttime hours to breathe carbon dioxide, so if they are wet in the evenings, they won’t be able to do so effectively. This method is known as CAM; to learn more about CAM, read our page on how air plants breathe. You can check on them before you go to night and place them back in their terrariums or displays. Some indirect sunlight will help them dry more rapidly.
These are the queries about watering air plants that we encounter the most frequently. Did we respond to yours? If not, just inquire! Need advice on caring for air plants? Visit our page on air plant care.
comments
Regarding watering the plants with blooms, I have a query. How do you water them if, as I understand it, you don’t moisten the bottoms or the blooms? Do you bring all of your indoor air plants inside during the winter? Although it doesn’t get very cold very often where I reside in Largo, Florida, it does occasionally. Since we don’t have snow, I believe the wind to be the main issue with the cold. Please lend me any assistance you can.
I recently purchased an aquarium, and in order to ensure that my three air plants receive continuous moisture in the office, I planned to tie them to a branch and let them sit on top of the tank. Do I still need to sprinkle and soak them as usual if the water that has evaporated from the tank should be plenty for them to receive?
Our well water passes through a water softener, which I should have mentioned in my previous query. They would be set up here if they could just survive on smoke.
Since we live in north-eastern Washington, rain has not been an option for us. Instead, we use well water, which I won’t even drink. I use spring water to water my air plants because I purchase it and drink it. I haven’t had them long, but they seem to be doing fine. Is using spring water for irrigation problematic?
Due to hydration issues, I do not advise attaching air plants to driftwood. In retrospect, it sounds apparent, but I was new to air plants and lost five of my six because the wood kept too much water when I first gave them a soak.
Could you simply sprinkle the plants?
The final technique in our series on watering air plants is misting, which you can employ in between regular soaking or immersing. Read more in our earlier blog posts to learn more about the dunk method and soaking.
If you notice that your plant’s leaves are starting to seem a bit dry or if you live in a dry region with low air humidity, misting is an excellent approach to give it a little additional hydration. Misting is probably not enough water for your plant to grow, therefore you shouldn’t utilize this method as its only supply of water.
The T. tectorum, which has a lot of trichomes, is an exception to this rule and prefers misting to soaking or submerging. In a temperate area, you might only need to mist once a month with one of these guys, or once a week in a hotter environment.
In contrast to other plants with bigger leaves, plants with wispy leaves such the T. ionantha, T. andreana, or T. fuchsii v gracilis may require misting more regularly in addition to weekly watering.
- It’s easy to spritz plants; just use a spray bottle or hose attachment set to the “mist” setting. Make sure the entire plant gets soaked before misting. As previously mentioned, if this is their sole source of water, this is not the greatest approach for watering. If you mist your plants, remember to additionally soak or dip them once a week at the very least.
A useful generalization to remember is that a healthy air plant will have leaves that are wide open, whereas a dehydrated air plant would have leaves that curl inward. Bring on the mist if you see that your plant is starting to appear a touch dry between your regular waterings!