Similar to sculpting a masterpiece, shaping your fiddle leaf fig requires that you start with an idea of what you want the finished product to look like.
To ensure that the remaining foliage looks balanced, I find it helpful to label all the branches you want to remove with colorful tape or a Post-it Note before you begin. To lessen the risk of shock, start out gently and never remove more than 10% of your plant at once.
Decide on Your Ideal Shape
Fiddle leaf fig plants often have one of two shapes: a bush or a tree.
Smaller plants are typically bushier, whereas larger plants are typically more fashioned like trees. You might want to start shaping your little plant into a tree as it grows. Choose whether you want to prune your plant to maintain its compact bush shape or to give it a correct tree shape.
Plan to Remove Damaged Leaves or Branches
So that you can arrange to eliminate the least healthy parts of your plant first, evaluate the general health of each branch and group of leaves. Mark any sections that need to be removed if there are any leaves with brown spots or branches with smaller leaf growth.
Remove Crossing Branches
To increase airflow and relieve crowding, you should eliminate some portions of densely populated branches. You should take care of any branches that touch each other as well as any leaves that are preventing one another’s leaves from growing.
Create Your Ideal Shape
Any growth that is 8 to 10 inches or less from the ceiling, the surrounding walls, or the furniture should be planned for removal. Next, cut off any growth that does not conform to your ideal shape.
Remove lower leaves and branches to reveal a good trunk if you want to create a tree-like shape. Remove gangly or ugly growth if your plant is out of balance to give it a more appealing overall form.
How to Make Your Cuts
Pruning should begin once you’ve marked the sections you want to cut out and made sure you like the way the tree looks in its finished form. When pruning your plant, make sure the cutting motion does not crush or harm the stem by using a sharp, clean tool.
Cut each one away from the trunk or any leaves by about a half-inch. With no chance of infection spreading to the main trunk or any surviving leaves, this enables your plant to heal properly. In order to prevent the spread of bacteria and diseases, pick up and dispose of any falling leaves or garbage.
New Growth After Pruning
If your plant is healthy, it will typically divide the branch where it was pruned, producing two branches where one once was.
Eventually, this creates the impression of a fuller, healthier plant. Your plant might only continue to develop one branch where it was clipped if it is in pain or isn’t getting enough light. After pruning, allow access to lots of light to promote more development.
Fertilize After Pruning
Fertilize your plant frequently after pruning to promote new growth and aid in the plant’s recovery from the shock of pruning. (Are you unsure of the ideal fertilizer for your fiddle leaf fig? Test out our plant food! Within a few weeks to a month after pruning your plant, you ought to notice new growth.
Can you cut a fiddle leaf fig all the way down?
As I indicated earlier, many growers like to cultivate a traditional tree shape, complete with a distinct canopy and trunk. However, F. lyrata tends to grow in a columnar or bushy shape when kept as a houseplant.
In the wild, F. lyrata does this on its own by losing its lower leaves and growing into its original shape as a banyan tree.
like the renowned “Wild F. lyrata and ordinary banyan, F. benghalensis, both start out their lives as epiphytes. When a seed falls into another tree’s canopy, it germinates, develops, and eventually strangles its host plant as it descends to the ground.
Your houseplant won’t do this, of course, but the tree shape is attractive. How can a rambunctious F. lyrata be transformed into a tall, graceful specimen?
First off, if you’ve recently acquired a highly sought-after fiddle-leaf, hold off on starting to prune it into a tree shape.
Whatever two-thirds of the intended height means to you within the boundaries of your space, let it grow to that point. The trunk might become strong and thick as a result.
It’s advisable to top the tree out at least eight to ten inches away from the ceiling if you want it to grow tall.
This not only improves the appearance but also prevents the top leaves from bending and slamming against your ceiling.
Say, for instance, that you want to top your tree off at about seven or eight feet and that your home has nine-foot ceilings. You shouldn’t begin trimming for lateral growth until the trunk is at least five feet tall based on these measurements.
Wait until spring or summer when the plant is actively growing before pruning your fiddle-leaf fig to generate a tree form with branching lateral growth. Then, make a cut at least six inches down from the tip of the tree.
You can preserve and grow this cutting! Cut in an internodal space, if possible.
Don’t remove the leaves that are below the cut. So that the plant can photosynthesize and generate energy to grow those lateral branches, you want them to stay.
Within a few weeks, your F. lyrata will start to branch from the cut. Although this tree occasionally produces just one branch, it frequently produces two or three additional lateral branches.
You can remove one or two leaves from the tree’s base once the new branches have developed leaves.
The hue of the leaves and emerging branches will deepen as the canopy ages. Feel free to remove one or two more leaves from the bottom part of the trunk once you become aware of this.
You can continue to prune leaves away from the tree’s trunk as the canopy grows over time. You’ll eventually grow a tidy trunk that supports a Y-shaped canopy.
Note: Some knowledgeable gardeners enjoy using a technique called “creating lateral branches by notching. Using this technique, the gardener carefully cuts through two nodes. This cut is supposed to encourage the tree to generate lateral branches without losing height.
Because of the fast growth of F. lyrata and the fact that we are confident that pruning for lateral branch growth yields reliable results, we advise using this technique to produce that attractive canopy.
After pruning, give your plant the best care possible by providing it with the right amount of water, fertilizer, and light, which will hasten the healing of its wounds.
Can you completely remove the fiddle leaf fig’s leaves?
Cutting back fiddle leaf figs is actually extremely simple, despite the fact that the concept of it may be scary.
When trimming down fiddle leaf figs, be prepared. You should cut your plant with neat, precise cuts. Only a clean, well-kept set of pruning shears can accomplish this; not a pair of worn-out scissors. It’s also advised to cover the area surrounding your fiddle leaf fig with a drop cloth when you prune it because any cuts could drip sticky sap onto your floors, and nobody likes that.
If you feel so inclined, think about keeping the healthy trimmings and replanting them as fiddle leaf fig plants by rerooting them in a jar of water. Within 1-2 months, your cuttings should form healthy root systems; at this stage, you can plant them in little pots.
Your particular preferences will determine how you prune fiddle leaf figs. dislike the appearance of sick branches or shredded, burned leaves? Simply use your pruning shears to remove any of these eyesores. The stems or trunks of fiddle leaf figs can be either naked or covered in leaves. If you want your fiddle leaf fig to look more like a tree, you should remove the older lower leaves from the trunk, assuming your plant is still growing well on top.
Do you like how tall your fiddle leaf fig is right now? Your primary stem has a developing tip at the top where new leaves will eventually appear. You will need to use your fingers to pinch out these young leaves as they emerge in order to control the height of your plant. Additionally, it might prevent lower leaf loss and promote branching of your plant close to the pinch spots.
Is your fiddle leaf fig plant lanky or excessively tall? Make a cut just above one of the main stem’s nodes at the required height by inspecting the nodes (a node is the location where a leaf joins a branch). For any horizontal or outward branches that may be too lengthy for your taste, repeat this procedure. Below the areas where you were trimming back fiddle leaf figs, new growth can sprout.
Can you remove the fiddle fig’s top?
Your fiddle leaf fig probably has no other branches that will allow it to transition from a fiddle leaf shrub to a fiddle leaf tree. In addition, bear the following in mind before proceeding:
The amount of regrowth that results from pruning depends on how severe it was. The reason for this is that the plant is trying to grow again in an effort to balance the root system below with the shoot system above, which is now designed to support the plant at its bigger size before trimming.
Usually, the most active shoot growth takes place 6 to 8 inches after the pruning cut.
Make the cut on your fiddle leaf fig
Make a decision regarding the size of the Ficus lyrata cut. Once more, the branching will be more noticeable the longer a part is clipped. (And the less the plant will grow in height, at least for that shoot.)
Your fiddle leaf fig won’t be encouraged to generate as many lateral branches off of the main trunk if you simply pinch out the fresh buds at the top with your fingers.
If you want to encourage a little lateral development to make your plant appear fuller near the top, pinching is more helpful.
On the other hand, you’ll see a lot more branching if you remove 12 of the top shoots.
Choose the node that you want to cut above. The spots on stems known as nodes are where leaves, buds, or branches can grow. However, not every node has leaves or branches; some nodes may only have a mark and a little thickening of the stem. Internodes are the parts of the stem that lie between the nodes.
3. Make use of a clean pair of pruners. Just above the top of your node, make the cut. Cut just above the node rather than into it, which would harm it.
Any plant in the fig family, including your fiddle leaf fig, will exude an oozing, milky, white sap when cut. Simply avoid eating it, getting it in your eyes, or letting it land on the carpet because it can be annoying.
4. As a final piece of advice, wait to remove leaves from the trunk of your fiddle leaf until the new branches have begun to grow. Your plant should be as robust as possible because those leaves aid in the development of the new lateral buds.
(Are you wondering what to do with the plant pieces you pruned? Why not cultivate a second fiddle leaf fig?
I’m done now! Now, give your new lateral buds, which will eventually grow into branches, a few weeks. While the exact length of time varies on a number of variables, your chances of success are higher if you attempt this in the spring, when fiddle leaves are actively growing, as opposed to the winter, when they are largely dormant. In comparison to winter, when the plant will need more time to heal the cut and form new buds, springtime will see rapid new development.
My fig tree can I chop in half?
A fig tree may need to be pruned in a variety of circumstances. When you first transplant your young fig tree, you should perform fig bush pruning.
A fig tree should be cut back by about half when it is first planted. As a result, the tree will be able to concentrate on growing strong roots. Additionally, it encourages the fig tree to develop side branches for a bushier tree.
The optimal time to begin pruning fig trees for “fruiting wood” is the winter following transplanting. You will prune this wood in order to maintain the fruit’s health and accessibility. Choose four to six branches to serve as your fruiting wood, then cut the rest off.
Should I remove the fiddle leaf fig’s bottom leaves?
You should be aware of what those bottom leaves do before selecting when to remove them.
Lower foliage has the same function as that fresh, vibrant growth up top: the leaves work to mix that green chlorophyll, commonly known as “the meat of the leaf,” with sunlight, carbon dioxide, and water to produce sap, the plant’s own sweet food.
So let them alone if you want the trunk, roots, and new growth to continue receiving energy from the sun through the foliar producers and absorbing it.
Another advantage of the lower leaves is that this is typically where the most frequent watering issues show up. To put it another way, many owners of fiddles may detect overwatering and underwatering based on early warning indicators from these bottom leaves. You lose access to one of the plant’s early warning systems if you remove them.
Keep in mind that the lower leaves should be saved for the very last stage of shaping because they AID in giving the tree its characteristic shape.
Once more, deciding whether or not to remove these lower leaves depends on what they do for the plant.
Should I remove the fiddle leaf fig leaves that are broken?
We advise always removing the damaged portion of a leaf or, if it is completely brown, the entire leaf. The plant recovers and looks its best with the help of removal of the dead leaf or damaged parts. Pruning shears or extremely sharp scissors are required.
Instructions for proper removal of damaged or dead leaves
1. Use clean shears to remove any brown leaf tips or patches. To prevent harming the plant’s remaining good foliage, merely remove the damaged tips or areas, leaving a very small margin of brown. 2. Remove individual leaves at their bases if the entire leaf has turned brown. Gently tug the leaf; it might fall off on its own. Gently lifting the leaf should cause it to detach; if not, use clean shears to cut through the stem.
Do you have a query or concern regarding a plant? The Grow-HowTM Team is here to assist, so don’t worry! We are here to provide you with the information you need to be the greatest plant parent you can be, regardless of the question you have or the type of plant you have. We would like to impart to you our love and understanding of plants.