Sooner or later, you’re going to want to understand how to assist your fiddle leaf fig in branching if you want it to take on the desired tree-like shape.
A plant’s natural tendency is to climb upward so that it can compete with other plants for more sunlight. Therefore, sometimes it requires a little human assistance to motivate them to branch outward.
If you’ve ever pruned a hedge or vine-like plant, you know how important it is for getting lush, bushy growth. That also holds true for your fiddle leaf fig! When a stem, branch, or trunk is cut back, several stems are likely to emerge in its place.
In order to encourage your Fiddle Leaf Fig to branch, apply the following three techniques. Also, watch the video below to see me prune my own Fiddle Leaf Fig.
Can you sever a fiddle leaf fig’s branch?
It’s a good idea to spread out a few sheets of newspaper around your plant before you begin so that it will protect the flooring from any falling debris and the milky latex sap that will unavoidably leak out.
Keep the poisonous latex away from your skin and out of children’s and animals’ reach. It is advised that you wear long sleeves and gloves.
Additionally, it’s crucial to use a fresh, well-kept pair of pruners. Clean them with soap and hot water if you aren’t sure if you cleaned them after the last time you used them. Prior to usage, properly dry them.
Working with the main trunk or stem is how you prune a plant that has grown too tall. This branch can be the only one the tree has, depending on how your plant is shaped.
Find the area of the branch you wish to trim before making a cut. After that, lean in close to inspect the trunk. An internodal space, or a location on the trunk that is between two nodes, is what you’re looking for.
Nodes, which grow into leaves or branches, are merely slightly elevated rings in the bark of an F. lyrata tree.
Make a diagonal cut directly between the two nodes, and then use a damp cloth to clean away the sap. Expect to observe fresh lateral branches emerging from the node immediately beneath your cut within a few weeks.
It is well known that F. lyrata reaches for the light. If you want to prevent having a lopsided plant, be careful to rotate the planter every few days. Unfortunately, we occasionally forget to do this and our plants end up excessively leaning to one side.
Or perhaps you need to remove some lateral branches because the foliage is too dense.
You may encourage greater airflow between those lovely, gigantic leaves by cutting back on a few branches, which will help you prevent insect and disease problems.
Make sure, however, that you never remove more than 10% of the fiddle-leaf fig at one time.
Cutting too closely to the trunk increases the chance of injuring the branch collar’s tissue, which could then allow disease germs to enter the trunk.
If the branch is cut too close, it may remain attached and rot, possibly leading to the degradation of the branch collar and opening the door for infection.
Simply clip them off at the base with your pruners if you only need to remove a few sick or dead leaves from your plant here and there.
Where should a fiddle leaf fig be cut?
Your fiddle leaf fig probably has no other branches that will allow it to transition from a fiddle leaf shrub to a fiddle leaf tree. In addition, bear the following in mind before proceeding:
The amount of regrowth that results from pruning depends on how severe it was. The reason for this is that the plant is trying to grow again in an effort to balance the root system below with the shoot system above, which is now designed to support the plant at its bigger size before trimming.
Usually, the most active shoot growth takes place 6 to 8 inches after the pruning cut.
Make the cut on your fiddle leaf fig
Make a decision regarding the size of the Ficus lyrata cut. Once more, the branching will be more noticeable the longer a part is clipped. (And the less the plant will grow in height, at least for that shoot.)
Your fiddle leaf fig won’t be encouraged to generate as many lateral branches off of the main trunk if you simply pinch out the fresh buds at the top with your fingers.
If you want to encourage a little lateral development to make your plant appear fuller near the top, pinching is more helpful.
On the other hand, you’ll see a lot more branching if you remove 12 of the top shoots.
Choose the node that you want to cut above. The spots on stems known as nodes are where leaves, buds, or branches can grow. However, not every node has leaves or branches; some nodes may only have a mark and a little thickening of the stem. Internodes are the parts of the stem that lie between the nodes.
3. Make use of a clean pair of pruners. Just above the top of your node, make the cut. Cut just above the node rather than into it, which would harm it.
Any plant in the fig family, including your fiddle leaf fig, will exude an oozing, milky, white sap when cut. Simply avoid eating it, getting it in your eyes, or letting it land on the carpet because it can be annoying.
4. As a final piece of advice, wait to remove leaves from the trunk of your fiddle leaf until the new branches have begun to grow. Your plant should be as robust as possible because those leaves aid in the development of the new lateral buds.
(Are you wondering what to do with the plant pieces you pruned? Why not cultivate a second fiddle leaf fig?
I’m done now! Now, give your new lateral buds, which will eventually grow into branches, a few weeks. While the exact length of time varies on a number of variables, your chances of success are higher if you attempt this in the spring, when fiddle leaves are actively growing, as opposed to the winter, when they are largely dormant. In comparison to winter, when the plant will need more time to heal the cut and form new buds, springtime will see rapid new development.
Should I remove the fiddle leaf fig leaves that are broken?
We advise always removing the damaged portion of a leaf or, if it is completely brown, the entire leaf. The plant recovers and looks its best with the help of removal of the dead leaf or damaged parts. Pruning shears or extremely sharp scissors are required.
Instructions for proper removal of damaged or dead leaves
1. Use clean shears to remove any brown leaf tips or patches. To prevent harming the plant’s remaining good foliage, merely remove the damaged tips or areas, leaving a very small margin of brown. 2. Remove individual leaves at their bases if the entire leaf has turned brown. Gently tug the leaf; it might fall off on its own. Gently lifting the leaf should cause it to detach; if not, use clean shears to cut through the stem.
Do you have a query or concern regarding a plant? The Grow-HowTM Team is here to assist, so don’t worry! We are here to provide you with the information you need to be the greatest plant parent you can be, regardless of the question you have or the type of plant you have. We would like to impart to you our love and understanding of plants.
Should I remove the fiddle leaf fig’s bottom leaves?
You should be aware of what those bottom leaves do before selecting when to remove them.
Lower foliage has the same function as that fresh, vibrant growth up top: the leaves work to mix that green chlorophyll, commonly known as “the meat of the leaf,” with sunlight, carbon dioxide, and water to produce sap, the plant’s own sweet food.
So let them alone if you want the trunk, roots, and new growth to continue receiving energy from the sun through the foliar producers and absorbing it.
Another advantage of the lower leaves is that this is typically where the most frequent watering issues show up. To put it another way, many owners of fiddles may detect overwatering and underwatering based on early warning indicators from these bottom leaves. You lose access to one of the plant’s early warning systems if you remove them.
Keep in mind that the lower leaves should be saved for the very last stage of shaping because they AID in giving the tree its characteristic shape.
Once more, deciding whether or not to remove these lower leaves depends on what they do for the plant.
What happens when a fiddle leaf fig is notched?
A room is brightened by a bushy fiddle leaf fig with lush foliage, but occasionally they might become leggy, malformed, or not have the full foliage you want. Making sure a fiddle leaf fig plant is healthy and receiving everything it needs to thrive is the first step in encouraging it to grow bushy leaves.
Before attempting to coerce the plant into producing bushy foliage, be sure you are providing for its growing requirements and that the plant is healthy. Here is a quick list of the requirements for your fiddle leaf fig plant to thrive inside.
Check on its light needs
For photosynthesizing to take place and generate the energy required for growth, your fiddle leaf fig needs direct sunshine. Place your fiddle leaf fig in an area that gets at least 6 hours of direct sunlight per day to make sure its lighting needs are being satisfied. It works great to be near a window in the west or south. An eastern window also works nicely if you have adequate eastern exposure.
The level of light your fiddle leaf fig plant needs to thrive is not present in the light coming from a northern window. Similar to this, watch out that your plant doesn’t get too much light, since a sunburned fiddle leaf fig won’t look its best.
Make sure it’s getting enough water
Your fiddle leaf fig requires enough water to stay healthy and beautiful. Every time the soil feels dry to the touch 2 to 3 inches below the surface, water it thoroughly so that water runs through the bottom of the pot. After watering your plant, empty the saucer or catchpan. A fiddle leaf fig that has been overwatered may develop root rot, among a number of other problems. Water that is left in the saucer may siphon into the soil and keep it moist.
When determining how frequently to water a fiddle leaf fig, keep a close eye on the soil around the plant and create a schedule that works for you. When it is vigorously developing in the spring and summer, it can need watering once a week or more. During the fall and winter, it may last 10 days or longer without needing water.
Put your fiddle leaf fig in the right soil
To maintain the health of your fiddle leaf fig, you need well-draining soil. The roots may become trapped in squishy soil as a result of poor soil drainage. This may result in diseases like root rot.
By mixing one to two parts all-purpose potting soil, one part perlite, and one part peat moss, you can create your own potting soil for your fiddle leaf fig tree. Widely regarded as the ideal soil for fiddle leaf figs, this produces a light soil that drains well.
Ensure it has the right temperature and humidity
Temperature changes will harm your fiddle leaf fig, which enjoys temperatures between 65 and 75 degrees. It should not be planted close to heating or air conditioning vents because it is susceptible to both hot and cold gusts. It prefers a relative humidity of between 30 and 65 percent, therefore dry air in your home during the winter months may be problematic.
Use water-filled pebble trays underneath the pot or set up a humidifier to maintain the happiness of your fiddle leaf fig tree. You might arrange your plants in a cluster to take use of the moisture they transpire. The surrounding humidity will increase as a result.
Some people prefer to spritz their plants frequently, but this method is ineffective for increasing the humidity in the area around your plants. Misting has short-lived effects and needs to be done frequently during the day to be effective.
Feed your fiddle leaf fig with its preferred fertilizer
High nitrogen fertilizers work best for fiddle leaf figs. The optimal formula is 3-1-2. This or a similar recipe can be purchased from a hardware store or garden shop. From spring through summer, feed your fiddle leaf fig once a month, adhering to the application rate on the container. When new growth starts to show in the spring, you should restart fertilizing your fiddle leaf fig.
Pinch your fiddle leaf fig
The simplest and least labor-intensive technique to spur new growth is to pinch.
The act of pinching a fiddle leaf fig involves using your thumb and finger to scrape off the tiniest fresh leaves from the tops of your plant’s branches and stem. Squeeze the fresh leaves to remove them from the plant by locating them.
The plant must create new growth from nodes along the stem or branch when the fresh leaves are pinched out.
Prune your plant
While pruning requires a bit more work than pinching does in terms of making your fiddle leaf fig bushier, the consequences are the same.
You will require a clean, sharp pair of clippers or a knife to prune your fiddle leaf fig. Find a node on the plant’s stem where you want new growth or lateral branches to develop.
Just 1/4 to 1/2 inch above the node, cut the stem. This will compel the plant node to produce new growth. To force branching, you can prune lateral branches or the fiddle leaf fig’s entire top.
No more than 10% of the plant should be pruned. Extreme trimming may stress the plant and retard its growth.
Notch your fiddle leaf fig
A more sophisticated technique for making your fiddle leaf fig tree bushy is notching.
As previously mentioned, notching entails slicing the plant’s stem right above a node. This prevents the release of growth hormones and causes the node to produce new growth.
Since notching necessitates a deep cut through one-third of the stem, it carries a small chance of accidently cutting the entire stem. If you want to force new branches and bushy development on your fiddle leaf fig tree, try notching it as described above.
Your fiddle leaf fig plant will look better if you promote lush new growth. Notching is one method of doing it, but it’s not the only one. If you’re worried about notching your fiddle leaf fig and running the danger of breaking it or totally cutting the stem, think about pinching or pruning to create a bushy plant as an alternative.