All lilacs should generally be clipped right away in the spring after they have finished blooming. Lilacs set their flower buds for the following year immediately after the current year’s flowers have faded, therefore trimming later in the summer or fall will result in the removal of most or all of the blossoms for the following year. The larger common lilacs as well as the shorter or more “shrub like” cultivars are all subject to this timing guideline. While the “when” of lilac trimming is rather simple, the “how” is a little more difficult. For the time being, we’ll refer to lilac pruning as either maintenance pruning or rejuvenation pruning to keep things simple.
How much should lilac bushes be pruned?
Never remove more than one-third of a shrub’s stems in a single pruning season for lilacs. I just cut the branches of the lilac tree down to a manageable height when they started to stray too close to the eaves. After trimming the dead blossoms, I decided to call it a day. A little minor thinning might also be done to promote new growth.
In late winter or early spring, a more vigorous pruning should be performed, perhaps on older shrubs that haven’t been routinely tended to. At this time, you should remove any old wood and damaged stems while keeping the more recent growth. Reduce the aging stems to the ground.
I’ll simply cut any very long sections off the Bloomerang lilac to keep the shrub’s form. Because bloomerangs naturally have a spherical habit, you don’t need to bother about sculpting the bush too much. My plant has been in the garden for a while and is still adorable and manageable.
How are lilac bushes pruned for the winter?
Cutting off the tops of stems that have grown out of control is frequently insufficient when pruning lilacs. It is typically preferable to remove the entire stem. The best way to trim lilacs is with clippers. To avoid spreading and promote later blooms, remove spent blossoms right down to the stems. Three-quarters of the branches should be pruned. Remove any shoots that are emerging from the main trunk and are growing close to the ground. Lilacs within the inner branches may need to be trimmed in order to increase air flow or let more light through.
However, it may be essential to prune the entire bush or tree to approximately 6 or 8 inches (15-20 cm) above the ground if lilac shrubs are already too big or starting to look unpleasant. Remember that it takes around three years for flowers to grow after the entire bush has been removed, so you might have to wait.
How late can lilacs be pruned?
Between April and June is the best time to prune lilac bushes, but only after they have stopped blooming. Although it may seem strange, lilac bushes bloom on the growth from the previous year, therefore by pruning sooner rather than later, you won’t damage the blossoms in the following year. The same holds true for lilac tree pruning techniques.
What distinguishes a lilac bush from a lilac tree?
Lilac bushes (also known as shrubs) are characterized by their numerous woody stems that emerge from the plant’s base. In contrast, the trunk of the majority of lilac trees is the only woody stem. However, your neighborhood garden center might also sell shrub lilacs that have been grafted onto a single stem to give them the appearance of miniature trees.
The choice between a lilac tree and a lilac bush is typically determined by the amount of space available. Lilac bushes come in a range of sizes and can be placed in more compact areas of a garden. A lilac tree requires space to reach heights of 20 feet and widths of 15 feet. Both require sunlight to bloom well.
Does new or old wood produce lilac blooms?
What specifically prevents these traditional plants from blooming? Instead of focusing on just one theory, consider a number of potential causes for this issue, including (in addition to illnesses and pests):
- Pruning when it’s not necessary
- The flower buds die in the cold
- placing your lilacs in the incorrect location
- The shrub in question either isn’t old enough to generate flower buds or is too old to do so.
You’ll see that while reasons one and three point to the gardener having done something incorrect, arguments two and four point to no one having done anything incorrect.
Why does it matter what time of day you prune? Shrubs called lilacs produce flowers on rotting wood. This indicates that the flower buds for the upcoming spring’s blooming season have already been formed on the growth from the previous year. When this growth is pruned, the flower buds and, consequently, the blooms they would have produced, are lost. Because of this, it is recommended that you clip lilac bushes as soon as they finish flowering (before they have set bud for next year).
Click Play to Learn How to Prune Lilacs
Despite being a relatively cold-hardy plant, the common lilac (Syringa vulgaris) can suffer harm if a hard frost or freeze occurs just as the flower buds are about to open. As a result, that year’s flowers are lost. You can’t really stop it, so simply accept the loss and look forward to the blossoming twice as much the next year.
Where you put your lilac shrub matters a lot, just like it does with most other plants. Lilacs require full sunlight and prefer well-drained soil. If you made a mistake when you first put your plants on either of these fronts, you can be paying for it today by your lilac not blooming. However, there is a simple solution to the issue: move your shrub to a more favorable location.
Regarding the fourth reason, be aware that although though these bushes have a long lifespan, they do tend to produce fewer flowers as time passes. Implementing a rejuvenation pruning on your lilacs will solve this issue (do not expect immediate results, though). Sometimes, though, the converse is true: your plant may be too young to bloom. Allow some time.
Should lilacs be Deadheaded?
The removal of spent flowers to encourage new blooming—deadheading—is a crucial part of lilac maintenance. Lilacs should be deadheaded as soon as the flowering is finished to allow the plants to grow robust, healthy buds that will flower vivaciously the following year. According to the University of Minnesota Extension, you can use a hand pruner, but larger plants could require a hedge trimmer. Only the dead blossom should be removed; the plant should still have two leaves.
According to the Chicago Botanic Garden, you should prune lilacs at the same time as you deadhead them since they set the blossoms for the following year quickly after flowering. By doing this, you can prevent damaging or removing the developing buds. Three to four years after planting, you should start pruning lilacs. It might be necessary to trim back overgrown lilacs to just a few inches above the ground. Winter is the ideal time to complete this. In this instance, it will take the shrub one or two growing seasons to start blooming once more.
Can lilacs be pruned to preserve a small size?
One of the joys of spring is the luscious aroma of lilacs. The lilac bush, which blooms in late April or early May with clusters of tiny purple flowers resembling bunches of grapes, is a common sight in most communities.
These are primarily common lilac shrubs (Syringa vulgaris). Kris Bachtell, vice president of collections at the Morton Arboretum in Lisle, described it as “grandma’s lilac.” It is widely known.
He said that there are hundreds of cultivated types. Although there are cultivars with magenta, pink, and white blooms as well, the majority bloom in hues of purple. They are all resilient and enduring.
Despite being widely cultivated, common lilac is difficult for some gardeners to grow. Even if some newer types are more resistant to powdery mildew, older ones are frequently deformed by it in the late summer.
The plants, which are native to rocky Balkan hillside soil, require full light and well-drained soil. An older lilac’s blooming cycle may end if nearby trees have grown to shade it.
Lilacs require frequent renewal trimming to reduce their size and thin them out. According to Bachtell, this necessitates the yearly removal of certain elder stems as well as dead wood. Lilacs also frequently sprout suckers from their root systems, which may need to be cut back.
The common lilac can simply be too much of a shrub for smaller yards because it is a large shrub or small tree that grows 8 to 20 feet tall and almost as wide.
Fortunately, Bachtell says, there are alternatives. “He said that several other lilac species are somewhat smaller. “They might be more disease- and shade-tolerant than grandma’s.
Meyer lilacs (Syringa meyeri) can reach heights and widths of 6 to 8 feet. Even though it thrives in direct sunlight, it can tolerate some shade. The flower clusters are smaller but very fragrant, and they emerge a little later than those of the common lilac. Autumn causes the leaves to become yellow. Although there are various cultivars, Palibin is the most popular.
One cultivar, Miss Kim, of the Manchurian lilac (Syringa patula), is primarily recognized. On a plant that is 5 to 8 feet tall, it bears delightfully scented light purple blossoms that turn light pink as they age. In the fall, the ruffled leaves become purple-red. Compared to other garden lilacs, the plant is a little more resistant to powdery mildew.
Hybrid lilacs that rebloom in the late summer or early fall do so less profusely than they do in the spring. Bloomerang Purple (Syringa ‘Penda’), Bloomerang Dark Purple (Syringa x ‘SMSJBP7’), and Bloomerang Dwarf Pink (Syringa x ‘SMNJRPI’) are just a few cultivars in the Bloomerang line. They are all smaller than typical lilacs, although cultivar differences in size should be noted on the label.
According to Bachtell, pruning should be done in the first week or two after the spring shrub has stopped flowering if it’s necessary to keep a lilac untangled and at the right size. Pruning in the winter will destroy buds that might otherwise develop fragrant blooms since lilacs bloom from buds that were formed the previous year.
Why aren’t my lilac bushes in bloom?
A. There are a number of potential causes for your lilac’s failure to blossom. Lack of sufficient sunlight is the main culprit. Lilacs (Syringa) should be planted in an area with at least six hours of direct, bright sunlight per day. They can withstand a wide range of moisture levels as long as they are grown in soil with good drainage.
If your lilac is clipped at the wrong time of year, it might not blossom for another reason. Lilacs bloom in the spring on the growth from the previous year, and soon after, they begin to form the buds for the following year. Within a few weeks of the plant blooming, pruning must be done simultaneously with the removal of the wasted flowers in order to prevent the removal of the buds for the following year. A late freeze can harm flower buds on types that bloom early.
Lilacs have a tendency to mature into overgrown, leggy shrubs with minimal foliage at the bottom. When this occurs, it might be required to prune them to within 12 inches of the ground in order to completely rejuvenate them. When the shrubs are dormant in late winter, this should be done. Lilacs benefit from this repair, although their blooming cycle will be hampered for at least one season. Lilacs can receive a rejuvenation pruning over a two-year period to stop the interruption of bloom cycles. Half of the shrub’s stems should be hard pruned the first year, and the remaining stems the following year.
Lilacs do not consume a lot of food. Excessive fertilization, particularly nitrogen fertilizer, can frequently promote luxuriant vegetative growth at the expense of flower development. A lilac’s failure to bloom could potentially be due to its proximity to turf that receives frequent fertilization.
Can lilacs still be pruned in July?
EVERY garden should contain some common lilacs (Syringa vulgaris) or their several lovely cousins, old-fashioned shrubs that couldn’t be easier to manage, EXCEPT IN THE WARMEST ZONES, WHERE THEY ARE PRECISELY DISPONIBLE TO BLOOM. They produce an abundance of fragrant flowers when given full sun, good air circulation (to reduce the occurrence of powdery mildew), and appropriate trimming. Lilacs that don’t blossom typically haven’t had enough sunlight or had their branches cut at the incorrect time.
The lilac creates its flower buds from late summer through fall in preparation for the following year’s show, just like other woody plants that bloom in the spring. Pruning after, say, July 4th in the North, runs the danger of decreasing the bloom the next year. If you prune in the fall or early spring, your disappointment is guaranteed.
The best way to make a lilac happy is to cut bouquets from it every spring—this is really just deadheading. The lilac is not really asking for much, but it is paying you handsomely because the trusses create opulent indoor arrangements, even though they are not necessary for its health or survival. You succeed with a little effort.
To prevent the flowers from wilting very immediately, split the bottom few inches of the stem ends with a hammer before bringing the cuts inside.
Bonus: By picking flowers, you can avoid the unsightly problem of the numerous, dried-up flowerheads that stubbornly cling on throughout the year.
Cut out any dead, damaged, or diseased wood as soon as it appears on a shrub or tree, and do the same with suckers that appear at the base (which, if the plant is a grafted one, may be sprouting from the rootstock). A lilac occasionally needs to be reshaped.
According to conventional gardening wisdom, every shrub can “remove one-third of its oldest stems to the base annually for three years to revitalize it, but I have a question: Take a close look at your lilac (or any other plants). On occasion, you don’t want to reinvent yourself (also “Before pulling out the saw, look and consider and look some more in order to adjust (rather than revitalize) the item. I enjoy how Jeff Jabco from the Scott Arboretum at Swarthmore College describes the many steps of trimming, whether it be for annual flower harvesting or more challenging projects.
Here is a link to my lilac collection. To learn how to extend the life of your cut flowers, continue reading.