3. Take the plant out of its pot and place it in the hole. Make sure the top of the root ball is about an inch or more above the soil surface.
4. Apply the soil mixture all the way around the root ball, pressing it down firmly.
5. Take a long drink.
6. Mulch the area you just planted to a depth of 2 inches, being careful not to pile mulch up against the base of the plant. This will help keep the soil moist and prevent weeds from sprouting by denying them access to sunlight.
How to Water Lilacs
After planting, monitor your plants frequently, and water them once or twice a week, or anytime the top inch of soil becomes dry. While watering, count to 10 to make sure you’re providing each lilac plant with enough moisture. (If the plant becomes too dry, the leaves will start to droop.) You can reduce watering to every other week once plants have been planted and have had a few months to establish themselves. Lilacs won’t require additional water during the second growing season or later unless there hasn’t been rain in your location for a month or more.
How to Feed Lilacs
Lilacs should be fed Miracle-Gro Shake ‘n Feed Flowering Trees & Shrubs Plant Food after they have bloomed in the spring to encourage the development of robust roots. This plant food is jam-packed with nutrients for your plants, including kelp, earthworm castings, feather meal, and bone meal. These ingredients nourish soil bacteria, which in turn break down organic matter into nutrients for your plants.
How to Help Prevent Disease Problems with Lilacs
Powdery mildew is the main problem with lilacs, especially common lilacs. What’s the best approach to prevent this? Purchase and plant lilac cultivars that resist powdery mildew (check the plant tag or online description). Lilacs benefit from being planted in areas with good airflow. This fungus disease won’t respond to spraying, and it will finally go away on its own.
How to Deadhead Lilacs
Be sure to deadhead young lilacs as they start to bloom (this could take a few years!). Deadheading involves clipping off faded flowers at the base as soon as they start to droop and fade. In response, the plant will use more energy developing new flower buds for the upcoming spring.
How to Prune Lilacs
Although the newer, smaller lilac kinds require less trimming than the enormous conventional lilacs, all lilacs will grow more effectively and bear more flowers with regular pruning. Here are a few possibilities:
- Cut an older lilac shrub to 8 inches above the ground in late winter (March or April), then let it grow out if it isn’t flowering despite receiving plenty of sunlight. The following March, choose 8 to 10 of the best-looking stems, and reduce them by half. Trim the remainder to the ground. The following year, new blossoms should appear.
- Selectively prune 1/3 of the branches all the way back to the ground each year to revive shrubs that aren’t flowering well instead of chopping the shrub all the way down.
- Cut back branches to reduce size as soon as the shrub’s flowering has finished.
Which fertilizer is ideal for lilacs?
Lilac plants don’t require a lot of food or fertilizer. A 10-10-10 fertilizer mixture applied yearly in the early spring is what we advise. (The amounts of nitrogen, phosphorus, and potassium, or NPK as they are popularly known, are represented by the digits 10-10-10 in the formula.) Early spring fertilization of lilacs with a high phosphorus solution encourages blossoming.
Coffee grounds and grass clippings are also excellent sources of nitrogen. Use in moderation since an excess of nitrogen in the soil can lead to subpar blooms. The ideal soil conditions for lilacs are slightly alkaline (6.5–7.0 pH), wet, and well-drained. The soil may become more alkaline by adding bone meal to it. Use Miracle-Gro Shake ‘n Feed Flowering Trees & Shrubs Plant Food in the spring if you decide to feed your plant. Last but not least, lilac plants dislike acidic soil. Epsom salts can be used to encourage blossoming while the plant is dormant.
What is necessary for lilacs to grow?
I had a variety of roles as a founding worker at Gardener’s Supply over the years. I currently run my own business, which is called Johnnie Brook Creative. A huge vegetable garden, a seasonal greenhouse, a cutting garden, perennial gardens, a rock garden, a shade garden, berry plantings, numerous container plants, and a meadow garden are among the gardens surrounding my Richmond, Vermont, home. The garden is the only place I would rather be. Check out this Garden Gate magazine video interview from January 2021 if you’re interested in learning more.
Among all shrubs, lilacs are among the easiest to maintain. Their requirements are straightforward: lots of sunlight, excellent drainage, nutritious soil, and yearly pruning. The only maintenance you’ll need to perform is yearly trimming to preserve a great shape, so pick your planting location wisely. You’ll be rewarded with bouquets of scented blooms in the spring.
Lilacs can be planted either in the fall before the ground freezes or in the spring after the earth has thawed. Lilacs are frequently supplied bare-root and dormant in the spring. The plants are merely “sleeping,” not dead. When the roots arrive, take off any packing and soak them in lukewarm water for 10 to 15 minutes. Read How to Plant a Bare-Root Tree or Shrub for planting guidelines. Lilacs are also available in containers. Read How to Plant a Tree or Shrub for details on planting procedures.
Llamas enjoy Miracle Grow, right?
Lilacs require a high phosphorus feed when the soil is deficient in phosphorus, which can only be determined through a soil test.
When nutrients are transformed into food that your flowering trees can use, phosphorus plays a crucial role. It is the primary component of an NPK-listed fertilizer and is represented by the second number on the package.
It aids in the promotion of healthy root development in addition to being necessary for the production of blooms and bruit. It can also be found in bone meal, where it combines with calcium to form calcium phosphate.
Bonemeal
You can obtain bonemeal in the form of a powder by grinding animal bones. It is steamed by manufacturers to create plant nutrients. So, to ensure that your plant stays healthy, add some of this lilac fertilizer to your soil if it needs to be more alkaline.
Epsom Salt
You can hasten the blooming of your indoor plant or the lilac in your garden by mixing Epsom salt and sugar. Your lilac bush will grow bushier and produce more flowers and chlorophyll as a result of using epsom salts. However, avoid overfertilizing your plant because it won’t flower.
Add Other Organic Matter
When it comes to organic matter, you may discover them in a number of solutions that are available to create a safer atmosphere.
Compost, manure, bone meal, and fish emulsion all include plant fertilizer. Additionally, as a good nitrogen source, you can use coffee grounds or grass clippings, but only in small amounts.
Miracle-Gro
Use Miracle-Gro Water Soluble All Purpose Plant Food when fertilizing lilacs. The fertilizer is excellent and won’t burn the foliage. For optimal results, feed your lilac once every 14 days while it is actively developing.
- The Miracle-Gro Garden Feeder can feed all of your outdoor plants in two ways and can cover up to 500 square feet in 12 minutes.
- Adding one tablespoon to each gallon of water will allow you to use it with a watering can as well.
- You simply need to combine half a teaspoon per gallon of water every two weeks if your lilac is grown as an indoor plant.
Leading Lilac Fertilizers
The following feeds are also options for your lilac plant if you’d prefer something different:
The BioAdvanced 701700B is a great alternative because it offers a special combination of nutrients to fight pests and promote lilac growth. It is a multipurpose plant fertilizer that kills pests and stays in the soil to maintain the health of your lilac plant. Your plant absorbs water through the roots even when it rains.
Your lilac plant will benefit from Scotts 200910 Evergreen Flowering Tree Food because it thrives in acidic soil. Utilizing it encourages blossoming and supports the development of strong roots. It also contains the ideal ratio of organic nutrients.
Jobe’s 06105 Fertilizer Spikes are made up of soluble potash, phosphate, and ammoniacal nitrogen. As a result, applying the feed only needs to be done once every eight weeks.
How can I make my lilac bush produce more flowers?
Lilacs often bloom quite consistently, although occasionally they don’t. To ensure that yours grows, follow these suggestions:
- Usually, the issue is a lack of sunlight. Each day, the sun should be exposed for at least six hours.
- Nitrogen in excess might be problematic. Lilacs are frequently cultivated in lawns, and nitrogen-rich fertilizers are utilized to make lawns greener. This results in lovely green foliage on the lilac but minimal blossom. Avoid using nitrogen-rich fertilizers.
- Make sure to prune when the season is perfect. Remove any dead or damaged timber in the early spring. However, avoid performing any significant pruning because you can just remove the dormant flower buds. It’s acceptable to perform more significant trimming after the flowers have faded, such as reshaping or rejuvenating an elderly bush. The old flowers can be taken out as well. Just be sure you finish it before the middle of the summer. A few of the flowers from the upcoming season may be lost if you wait too late.
Visit the Lilac Planting and Care page for a comprehensive guide to lilac planting and care.
How much water do lilacs require?
A traditional flower garden, outdoor space, or decorative pot should all contain lilac plants as they are a staple flowering shrub. Zones 3 through 8 are suitable for growing these fragrant shrubs, and they require very little maintenance. Lilacs need at least 6 hours per day of direct sunlight to produce their best flowers. Lilacs benefit from regular watering after initial planting, throughout active growth seasons (spring), and during prolonged dry spells. Lilacs are fairly drought tolerant once they are established.
It is advised to water your lilac plant once every 10 to 14 days from spring till blooming is finished. The ideal irrigation for lilacs is deep, infrequent watering. Make sure the planting space or container has good drainage. These plants don’t appreciate having their feet wet and won’t bloom if they are overwatered. By saturating air pockets with water and reducing soil oxygen levels, excessive water can strangle the lilac tree’s roots. The first indication that the lilac is overwatered is the plant wiggling.
How are lilac bushes cared for?
Did you know that the National Gardening Bureau has designated 2022 as the “Year of the Lilac”? They have a sweet, eerie aroma and are among the easiest shrubs for your landscaping to maintain that bloom in the spring. Find out how to plant, nurture, and prune your lilacs.
About Lilacs
Syringa vulgaris, or common lilac, is prized for its tenacity, dependability, and scent. Lilacs are so hardy that they can live for more than 100 years and frequently outlive the houses they were planted near.
This tiny, multi-stemmed deciduous shrub (or tree) has approximately ten canes and blooms at eye level. The height of a common lilac can range from 8 to 12 feet, depending on the cultivar. The aromatic flowers attract butterflies and make good cuttings.
There are lilac types that come in white, cream, and even pink and yellow, though the blooms are typically lilac/purple in hue (ranging from very pale to extremely dark). Flowers can be solitary or double in number.
Lilacs bloom in northern states from mid- to late spring for around two weeks. However, there are lilac varieties for early, mid, and late seasons that, when cultivated together, guarantee a consistent bloom for at least six weeks.
Lilacs do best in soil that is fertile, humus-rich, well-drained, and neutral to alkaline (at a pH near 7.0). Add compost to your soil to improve it if it is in bad condition. (Learn more about adding amendments to the soil and getting it ready for planting.) Lilacs don’t enjoy having their feet wet and won’t blossom if they are kept too moist, so make sure the planting area drains well.
Lilacs should be planted in full sun, which is defined as having at least six hours of sunlight each day, for the finest blooms.
How to Plant Lilacs
- If you’re fortunate, a friend may offer you a sucker, or offshoot, of the plant’s root system. The sucker will first appear pitiful, but all you need to do is dig a hole, fill it with soil, and then insert the sucker. water next, and then wait. You’ll be rewarded with enormous, fragrant blossoms in 4 or 5 years.
- Lilacs purchased from nurseries can also be planted easily. If the plant was cultivated in a container, spread its roots out as you plant it; if it was balled or burlapped, gently remove the covering and any rope before doing so. Set the plant 2 to 3 inches deeper than it was while it was growing in the nursery and cover the roots with topsoil. in water Then add more topsoil to the hole to finish it.
- Depending on the kind, place multiple lilac bushes 5 to 15 feet apart.
- Apply a layer of compost under the plant each spring, followed by a layer of mulch to keep moisture in and weeds under control.
- If the weekly rainfall is less than 1 inch, water during the summer.
- If lilacs receive too much fertilizer, they won’t bloom. In the late winter, they can manage a few 10-10-10, but no more.
- Spread some lime and thoroughly composted manure around the base of your lilac bush once it has finished blooming. Remove suckers while you form the shrub by trimming it.
Pruning Lilacs
- Since lilacs blossom on old wood, it’s important to prune in the spring immediately following their bloom. You risk removing the wood if you prune later in the summer. A word of advice: It’s time to prune if your lilac flower clusters are getting smaller!
- After bloom each year, cut away any dead wood. Remove the oldest canes by pruning (down to the ground). Take out the tiny suckers. Reduce weak branches until a robust shoot remains. Reduce tall canes to eye level.
- Remove one-third of the oldest canes (down to the ground) in year one, half of the remaining old wood in year two, and the remainder in year three if your lilac is very old and in poor condition. Cutting the entire plant back to a height of approximately 6 or 8 inches is another option for elderly lilacs. Although it sounds dramatic, lilacs are remarkably resilient. This option’s drawback is that it takes some time for the hair to grow back. The lilac will grow back bursting with blooms, so there will be less work and more reward.
- It is important to understand that extreme trimming causes bloom loss for one to three years. For these reasons, a smart pruning program gives the bushes yearly attention in an effort to avoid making dramatic and severe cuts.
The Syringa vulgaris kind of lilacs is the most widely grown and fragrant:
- Try the double magneta variety “Charles Joly” for an early bloom.
- Lilacs in the middle of the season include “Monge,” a deep reddish purple, and “Firmament,” a delicate blue.
- Miss Canada, a reddish pink, and Donald Wyman, a solitary purple, are two late-season beauties.
Syringa x hyacinthiflora, an early-flowering lilac cultivar, opens 7 to 19 days before those of the common lilac. Hummingbirds and butterflies are attracted to its fragrant blossoms.
The cutleaf lilac, a fragrant pale lavender, is one of the common lilacs that may flourish as far south as Zone 9. Common lilacs appreciate cold weather. The beautiful shrub Syringa patula ‘Miss Kim’ has light lilac-blue flowers that eventually become white.
There are tiny kinds for gardeners who simply don’t have the space for the conventional larger lilacs, particularly those in urban settings. Even in a container on your balcony or patio, they will grow.
- ‘Baby Kim’ has a lovely rounded shape, only grows 2 to 3 feet high (and 3 feet wide), and has purple flowers that draw butterflies. Hardiness from Zones 3 to 8 extended.
- Compact lilac ‘Little Lady’ (Syringa x) has dark pink buds that open to lilac-pink flowers and grows to be 4 to 5 feet tall and wide at maturity. Zones 2 to 7 are tough.
- Syringa vulgaris cultivars “New Age Lavender” and “New Age White” were developed for mildew resistance and are quite compact, growing from 4 to 5 feet tall and wide. Hummingbirds and butterflies are drawn to their fragrant blossoms. Zone 4 hardy.