Pruning is not typically thought of as one of the many gardening activities that may be done in the fall, despite the fact that there are several. It can be difficult to cultivate hydrangeas successfully in New Hampshire, and if you want your plants to blossom, there is frequently very little room for error in pruning.
Wait until Spring to prune hydrangeas
In New Hampshire, hydrangeas come in a variety of kinds, and each one has quite distinct growth patterns and pruning needs. Some plants only produce flowers on fresh growth, while others mostly produce flower buds on older wood. In any case, it is better to postpone all hydrangea pruning until spring. Hydrangeas, as with all other trees and shrubs, go dormant in the fall. Not much new growth is produced by them until the next spring. As new growth is more vulnerable to harsh cold at the location of wounds, plants that have been trimmed now run a higher risk of winter damage. Additionally, fall pruning may lessen the quantity of June blooms.
Considerations for pruning hydrangea species commonly grown in New Hampshire gardens
The gigantic blue mopheads or lacecaps known as bigleaf hydrangeas (Hydrangea macrophylla), which are familiar to most gardeners, form their flower heads at the tips of stems on old wood from the previous year. Although lower buds along the stem have the capacity to grow blooms as well, the hydrangea’s blossoming potential is decreased if those buds are died or damaged throughout the winter. Wait until new growth sprouts in the spring before pruning your bigleaf hydrangeas. Approximately 1/4 inch above the first group of live buds, prune the plant. A hint: the interior of living stems will be green, whereas the interior of dead stems will be brown. Cut completely dead stems flush with the base.
The three other hydrangea species that are frequently planted in Fresh Hampshire—oakleaf (H. quercifolia), panicle (H. paniculata), and smooth—all bloom on new growth. Before the emergence of the leaves in the late winter and early spring, remove wasted flowers and prune the plant to improve its general structure and habit.
In conclusion, there are a ton of other activities you can engage in to stay occupied in the garden during fall. Save the spring for hydrangea pruning.
In the spring, should I remove the dried-out blossoms from my hydrangea?
Your hydrangea shrubs’ blossoms appear to be withering or turning brown. No need to worry—this is merely a signal that it’s time to deadhead—remove the blossoms from the plant.
Deadheading hydrangeas doesn’t cause any damage to the plants at all. Flowering shrubs stop producing seeds when the spent blooms are removed, and instead focus their efforts on developing their roots and leaves. You will be doing your hydrangeas a favor by deadheading because this strengthens and makes plants healthier.
When should I prune the hydrangea’s flowers?
Late summer to early fall (August to September) sees the development of these plants’ bloom buds for the next year. So, before August, prune these shrubs once they are finished blooming (again, make a heading cut).
The Endless Summer is an exception. The Original Bigleaf Hydrangea (H. macrophylla ‘Bailmer’ PP15,298) as well as many cultivars from Bailey Nurseries’ Endless Summer line, including Blushing Bride, BloomStruck, Summer Crush, and Twist ‘n’ Shout.
On the wood from last year and any new wood that sprouts this year, the H. macrophylla blooms. Therefore, whether you prune it or not, it will bloom. A big, 4-foot-tall ring of hardware cloth can keep rabbits from nibbling on the stems of H. macrophylla over the winter.
The pink to blue tint of the Endless Summer hydrangea’s flowers (achievable with the right soil amendment) plus the fact that it blooms on both old and new wood caused it to make a big splash on the Minnesota landscape plant scene.
What occurs if your hydrangeas aren’t pruned?
If and when you prune is the key to happy, healthy hydrangea flowers. Of course, fertilizing and offering the ideal environment have a lot to recommend them. However, if you don’t prune properly, your efforts will be in vain. Deadheading is not the same as trimming. Pruning refers to more drastic cutting to preserve shape or remove dead growth. However, feel free to discard spent blossoms or cut fresh ones to use in arrangements.
Hydrangeas can bloom on either fresh wood or old wood, depending on the species. The wood from which they blossom determines whether and when to prune.
Old wood-blooming hydrangeas do not require pruning and benefit from it. They’ll blossom more abundantly the next season if you leave them alone. But feel free to deadhead or gently thin. Just keep in mind that while new growth may appear, it won’t bloom until the following season. In our region, four different species blossom on aged wood. Additionally, they are not limited to the hues displayed here.
Climb using suckers. On your wall or trellis, resist the desire to remove the dormant growth.
The flower heads are more conical in appearance, and the leaves are large and resemble oak leaves. It’s a pleasant surprise for a hydrangea when its leaves turn reddish-orange in the fall.
They are very comparable to lacecap types, but smaller and with more compact leaves.
Pruning should be done in late winter or early spring on hydrangeas that bloom on new wood. Trim back to two feet to prune to shape. The next season’s blossoms are produced by strong, fresh growth that is encouraged by trimming. In our region, there are two types that bloom on fresh wood. They are also not restricted to the colors displayed.
Oakleaf variants are not included in cone-shaped blooms. Keep the blooms on throughout the winter to provide interest; even dried out, they are quite lovely.
regarded as a wild kind. They often have smaller blooms and leaves than Bigleaf variants and are completely white. They enjoy full sun and can grow very tall.
Knowing whether or when to prune now will help you avoid the disappointment of a hydrangea that doesn’t blossom. Don’t forget that a robust shrub will produce more gorgeous blossoms if it has well-draining soil and good organic fertilizer. Come on in, and we’ll show you where to go to develop your green thumb.
Do my hydrangeas need fertilizer in the spring?
In order to give your hydrangeas an early-season boost, you should typically fertilize them in the spring right before they start to leaf out. During July’s growing season, fertilize them a second time. Two applications of the fast-release fertilizers are necessary in the summer.
Hydrangeas are pruned?
When should I prune my hydrangeas? is one of the most often asked gardening topics. We all have a tendency to want to hurry outside with the clippers and start hacking away when those billowy large flowers change from cheerful blues, purples, pinks, reds, and whites to uninteresting browns.
When to Cut Back Hydrangeas
The timing will vary according on the variety of hydrangea you have. First of all, be aware that hydrangeas do not require pruning unless the shrub has become unruly or too big for its location and requires some shaping up. Otherwise, simply deadhead wasted blooms and remove any dead branches from the plant.
How to Prune Hydrangeas02:07
But if you do decide to prune one, bear in mind to time it so that it blooms on old wood or new wood depending on the species of hydrangea you have.
If you wait too long, you can chop off the buds that are developing on old wood (stems from the year before the current summer), which would prevent flowers from blooming the following spring. Therefore, as soon as the flowers on these bushes have faded, they should be clipped.
The shrub should be clipped in the early spring before that new growth appears, but, if the shrub flowers on fresh wood (stems generated during the current season), which means that its buds are set inside the season.
Where are hydrangeas cut?
Mophead hydrangeas and lacecap hydrangeas, commonly known as bigleaf hydrangeas (Hydrangea macrophylla), are pruned using the same technique.
With its broad, roundish heads of huge petals in colours of blue, pink, green, and white, mophead hydrangeas are a popular choice for gardens. They are therefore a popular shrub option for cottage garden ideas and are also effective shade-giving bushes.
Small blooms in the center of the bloom and a border of bigger petals on the outside help identify lacecap hydrangeas.
The experts at Thompson & Morgan suggest that in order to winterize hydrangeas, “it’s better to leave the faded blooms in place over the winter to safeguard vulnerable new buds from frost damage.”
Early in the spring, while pruning lacecaps and mophead hydrangeas:
- To promote new growth that will produce better blooms, remove one or two of the plant’s oldest, weakest stems at the base.
- Just above a pair of buds, carefully remove any old flowerheads using secateurs.
- Don’t remove any of the blossom buds, please.
- Cut the stems down to the plant’s root system if the bigleaf hydrangea shrub has been neglected and has a lot of overlapping, tangled branches. The hydrangea won’t blossom until the next year, though.
Do you prune the ends off the hydrangea stems?
Remove up to one-third of the older living stems from the hydrangea each summer, cutting them all the way to the ground. The plant will recover as a result. Before the end of July, if required, prune back the plant to regulate its growth and give the buds time to grow. Usually, the plant grows back to its previous size right away.
Should I prune my hydrangea’s dead heads?
Correctly and timely deadheading your hydrangeas only benefits these plants in the long run. Deadheading is the technique of removing wasted flowers from a plant to promote greater blooming later on, much like trimming. Professional gardener Melinda Myers notes that deadheading encourages the plant’s energy to flow into the leaves, stems, and roots (rather than developing seeds) for future growth.
According to Myers, deadheading your hydrangeas provides cosmetic advantages in addition to enhancing the future blooms. She says that many gardeners prefer the neat and tidy impression that faded blooms create to that of dried flowers left on the plant. The species of your hydrangeas will determine when and how to deadhead them, according to Myers. Here is her response to our question regarding the ideal moment and technique for harvesting finished flowers from several varieties of hydrangeas.
How are hydrangeas cared for?
Although the hydrangea’s leaves and flowers seem delicate, little careful care is actually needed for them. Everything you need to know about caring for hydrangeas is provided in these recommendations.
- Over the course of the growing season, water at a rate of 1 inch per week. To promote root growth, deeply water three times each week. All varieties of hydrangeas benefit from constant moisture, but bigleaf and smooth hydrangeas need more water. To water thoroughly while keeping moisture off the flowers and leaves, use a soaker hose. Hydrangeas won’t wilt as much if they are watered early in the day on hot days.
- To keep the soil around your hydrangeas cool and moist, add mulch. Over time, an organic mulch decomposes, supplying nutrients and enhancing soil texture.
- Apply fertilizer according to the type of hydrangeas you have. Every variety has varied requirements and will profit from applying fertilizer at various times. A soil test is the most effective tool for determining your fertility requirements.
- In March, May, and June, bigleaf hydrangeas require numerous mild fertilizer applications.
- Two applications in April and June work best for oakleaf and panicle hydrangeas.
- The only time smooth hydrangea plants require fertilizing is in the late winter.
- By selecting cultivars with resistant characteristics, you can avoid pests and diseases. Hydrangeas can have leaf spots, bight, wilt, and powdery mildew. Although they are uncommon on hydrangeas, pests might arise when the plants are under stress. Aphids, leaf tiers, and red spider mites are examples of potential pests. Your best line of defense is to properly care for hydrangeas.
How should hydrangeas be cared for in the winter?
Stakes can be used to create a frame around the plant to protect it throughout the winter. To create a cage, encircle the stakes with chicken wire. Pine needles and/or leaves should be stuffed inside the cage to completely insulate your plant.
Because they do not settle as quickly as other materials, oak leaves perform nicely. As the insulation settles during the winter, keep a bag of leaves from your fall leaf raking pile to fill the cage.
As you fill the cage, take care not to snap off the ends of the branches because if you do, it will all be for nothing and you won’t have those magnificent blossoms the next summer.