Mophead hydrangeas and lacecap hydrangeas, commonly known as bigleaf hydrangeas (Hydrangea macrophylla), are pruned using the same technique.
With its broad, roundish heads of huge petals in colours of blue, pink, green, and white, mophead hydrangeas are a popular choice for gardens. They are therefore a popular shrub option for cottage garden ideas and are also effective shade-giving bushes.
Small blooms in the center of the bloom and a border of bigger petals on the outside help identify lacecap hydrangeas.
The experts at Thompson & Morgan suggest that in order to winterize hydrangeas, “it’s better to leave the faded blooms in place over the winter to safeguard vulnerable new buds from frost damage.”
Early in the spring, while pruning lacecaps and mophead hydrangeas:
- To promote new growth that will produce better blooms, remove one or two of the plant’s oldest, weakest stems at the base.
- Just above a pair of buds, carefully remove any old flowerheads using secateurs.
- Don’t remove any of the blossom buds, please.
- Cut the stems down to the plant’s root system if the bigleaf hydrangea shrub has been neglected and has a lot of overlapping, tangled branches. The hydrangea won’t blossom until the next year, though.
When do hydrangeas need to be pruned?
Depending on which group the plant belongs to, the timing and extent of pruning are determined:
Advice on Pruning for Group 1:
- As the days get shorter and the weather gets colder in the late summer and fall, buds for the following year’s blooms start to form.
- Typically, removing dead, diseased, or damaged branches is all that is required to preserve shape, size, and a healthy plant. Otherwise, gentle pruning ought to be practiced.
- In the summer, trimming should begin as soon as flowering ends, but no later than August 1. Pruning should not be done in the fall, winter, or spring because you risk removing fresh buds.
- Tip-pruning the branches in the spring as the leaves begin to appear can promote more numerous, smaller flower heads as opposed to fewer, larger flower heads.
Advice on Pruning for Group 2:
- On the growth of the current year, flower buds form.
- Early in the spring, as the leaves are starting to emerge, prune.
- Just above a node, prune branches back by half to a third.
- After that, prune any fragile or spindly branches.
- Minimal trimming encourages huge, strong bushes with many of tiny flower heads in H. arborescens. Hard pruning between 12 and 18 inches from the ground, or even all the way down, will result in fewer but larger flower heads that may flop if unsupported.
- For H. paniculata, remove the surrounding smaller wood while leaving the larger stems in order to establish a sturdy foundation.
Pruning may be connected to flower head size. Shoots will grow more vigorously and flower heads will be bigger and fewer with more rigorous trimming. Smaller but more numerous flower heads may result from less aggressive or tip pruning.
Consideration of hydrangeas’ mature size is the best piece of advise. Place them in a location where they won’t outgrow and won’t need a lot of pruning to keep them in check. Hydrangeas don’t need to be pruned precisely or often; as long as dead wood is removed, they will remain healthy and continue to develop and bloom.
How should hydrangeas be pruned properly?
In the late winter, early spring, or just above a big bud known as a heading cut, trim back stems. The flower heads of these plants have a conical form. I wait to prune these until late winter or spring because I advise leaving the dried, tan flower heads on the plant to add some winter beauty to your garden. Favorite panicle hydrangeas include:
- H. paniculata ‘Bulk’ PP16, 812, Quick Fire
- (H. paniculata ‘Limelight’)
- Berry White (H. paniculata ‘Renba’ PP28, 509) first editions
How should a hydrangea be pruned, step by step?
Simply put, old wood is wood from the previous year. On stalks that have been part of the plant since the previous year, flower buds on hydrangeas that bloom on old wood are set in the late summer.
The mophead, bigleaf (macrophylla), lacecap, and oakleaf kinds of hydrangea bloom on ancient wood.
These gorgeous shrubs require very little pruning. If you must, though, knowing when and where to trim is crucial. That’s because the less flowers you have the following summer, the more old wood you take.
To keep your old wood hydrangeas healthy and vigorous, take the following three steps:
- Pruning flowering stems back to a pair of sound buds should be done as soon as possible after blooming, but no later than July.
- Remove weak or broken stems during the winter or early spring pruning. The oldest stalks should only be removed in thirds, cutting them to the ground.
- To maintain the shape of your shrubs and revitalize them, repeat the method each summer.
Do you remove hydrangea blooms that have died?
Your hydrangea shrubs’ blossoms appear to be withering or turning brown. No need to worry—this is merely a signal that it’s time to deadhead—remove the blossoms from the plant.
Deadheading hydrangeas doesn’t cause any damage to the plants at all. Flowering shrubs stop producing seeds when the spent blooms are removed, and instead focus their efforts on developing their roots and leaves. You will be doing your hydrangeas a favor by deadheading because this strengthens and makes plants healthier.
What occurs if hydrangeas are not pruned?
If and when you prune is the key to happy, healthy hydrangea flowers. Of course, fertilizing and offering the ideal environment have a lot to recommend them. However, if you don’t prune properly, your efforts will be in vain. Deadheading is not the same as trimming. Pruning refers to more drastic cutting to preserve shape or remove dead growth. However, feel free to discard spent blossoms or cut fresh ones to use in arrangements.
Hydrangeas can bloom on either fresh wood or old wood, depending on the species. The wood from which they blossom determines whether and when to prune.
Old wood-blooming hydrangeas do not require pruning and benefit from it. They’ll blossom more abundantly the next season if you leave them alone. But feel free to deadhead or gently thin. Just keep in mind that while new growth may appear, it won’t bloom until the following season. In our region, four different species blossom on aged wood. Additionally, they are not limited to the hues displayed here.
Climb using suckers. On your wall or trellis, resist the desire to remove the dormant growth.
The flower heads are more conical in appearance, and the leaves are large and resemble oak leaves. It’s a pleasant surprise for a hydrangea when its leaves turn reddish-orange in the fall.
They are very comparable to lacecap types, but smaller and with more compact leaves.
Pruning should be done in late winter or early spring on hydrangeas that bloom on new wood. Trim back to two feet to prune to shape. The next season’s blossoms are produced by strong, fresh growth that is encouraged by trimming. In our region, there are two types that bloom on fresh wood. They are also not restricted to the colors displayed.
Oakleaf variants are not included in cone-shaped blooms. Keep the blooms on throughout the winter to provide interest; even dried out, they are quite lovely.
regarded as a wild kind. They often have smaller blooms and leaves than Bigleaf variants and are completely white. They enjoy full sun and can grow very tall.
Knowing whether or when to prune now will help you avoid the disappointment of a hydrangea that doesn’t blossom. Don’t forget that a robust shrub will produce more gorgeous blossoms if it has well-draining soil and good organic fertilizer. Come on in, and we’ll show you where to go to develop your green thumb.
Cut back these shrubs in late winter before new growth begins
Shrubs that flower on young wood typically start blooming later than old-growth bloomers, beginning in June and continuing until the first frost, because they need to grow and set buds the same year that they bloom. As long as you avoid trimming when the flower buds are opening, these shrubs are understanding if it is not done at a specific period.
1. Trim the flowers all the way back for larger blooms.
These bushes can be completely removed from the ground in late winter or the beginning of spring. If cut severely like this every year, smooth hydrangeas will produce much larger flowers, but many gardeners prefer smaller blooms on stronger stems.
2. Maintain an old growth foundation to lessen flopping
Especially after watering from above or after a heavy storm, the branches of some hydrangeas frequently topple over from the weight of their blooms. Cutting the stems to a height of 18 to 24 inches will help to reduce this flopping by creating a strong framework for fresh growth.
Janet Carson is the University of Arkansas Cooperative Extension Service’s horticulture specialist.
Receive our most recent advice, training, and tutorial videos in your inbox.
Should I trim the hydrangea’s dead leaves?
(2) After the plants have grown to be at least five years old, each summer, roughly one-third of the older (live) stems can be cut off at the ground. The plant will recover as a result.
(3) In addition, if a plant needs to be pruned to lessen its growth, it can be done in June or July without affecting the bloom the following year. But it will quickly shrink back to its original size. This is one of the reasons it’s ideal to plant a hydrangea in an area where it won’t require pruning.
Does fresh or old wood produce flowers for hydrangeas?
Smooth hydrangeas are easy to grow and exceptionally cold tolerant; they are native to the southern United States. This species, which is frequently misidentified as an Annabelle hydrangea, has enormous, spherical flower heads that are colored white, pink, and green.
Ideal Conditions for Smooth Hydrangeas
A position with some shade is necessary for smooth hydrangea to flourish. Plants benefit from morning light or bright shade for blossoming while being shielded from the scorching afternoon sun. Drought is a threat to plants, and they thrive under conditions of consistent wetness. a great inclusion in woodland gardens and mixed borders, or hidden beneath perennials.
Pruning Smooth Hydrangeas
On fresh wood, smooth hydrangeas blossom. In order to promote profusion of blooms and keep plants at a reasonable size, plants are frequently cut back to the ground in late winter or early spring. Cut some of the stems to the ground and leave others with varied lengths, between one and two feet, if a larger shrub is desired.
Should hydrangeas be pruned annually?
Only prune these hydrangeas in the summer after bloom, not in the fall. In August and September, old wood hydrangeas begin to form their bloom buds for the following year. It is advisable to delay pruning your hydrangeas until the following year if you don’t do it right away. If not, there won’t be any blossoms the next spring.
How are hydrangeas prepared for the winter?
Protecting flower buds is the aim of winter hydrangea care. The simplest approach is to pile 12 inches or so of mulch made of chopped-up leaves or bark around the base of the plant. After the ground freezes in the late fall, set the mulch pile there. Plants can then be exposed in the spring, when the temperature starts to stay above freezing.