Pruning is not typically thought of as one of the many gardening activities that may be done in the fall, despite the fact that there are several. It can be difficult to cultivate hydrangeas successfully in New Hampshire, and if you want your plants to blossom, there is frequently very little room for error in pruning.
Wait until Spring to prune hydrangeas
In New Hampshire, hydrangeas come in a variety of kinds, and each one has quite distinct growth patterns and pruning needs. Some plants only produce flowers on fresh growth, while others mostly produce flower buds on older wood. In any case, it is better to postpone all hydrangea pruning until spring. Hydrangeas, as with all other trees and shrubs, go dormant in the fall. Not much new growth is produced by them until the next spring. As new growth is more vulnerable to harsh cold at the location of wounds, plants that have been trimmed now run a higher risk of winter damage. Additionally, fall pruning may lessen the quantity of June blooms.
Considerations for pruning hydrangea species commonly grown in New Hampshire gardens
The gigantic blue mopheads or lacecaps known as bigleaf hydrangeas (Hydrangea macrophylla), which are familiar to most gardeners, form their flower heads at the tips of stems on old wood from the previous year. Although lower buds along the stem have the capacity to grow blooms as well, the hydrangea’s blossoming potential is decreased if those buds are died or damaged throughout the winter. Wait until new growth sprouts in the spring before pruning your bigleaf hydrangeas. Approximately 1/4 inch above the first group of live buds, prune the plant. A hint: the interior of living stems will be green, whereas the interior of dead stems will be brown. Cut completely dead stems flush with the base.
The three other hydrangea species that are frequently planted in Fresh Hampshire—oakleaf (H. quercifolia), panicle (H. paniculata), and smooth—all bloom on new growth. Before the emergence of the leaves in the late winter and early spring, remove wasted flowers and prune the plant to improve its general structure and habit.
In conclusion, there are a ton of other activities you can engage in to stay occupied in the garden during fall. Save the spring for hydrangea pruning.
What results from hydrangea pruning in the spring?
The simplest but most frightening type of pruning is probably spring trimming of hydrangeas. This is because they are able to be chopped down to size. Cutting a plant down completely can be unsettling, especially if you’ve never done it before, but it’s healthy and safe for hydrangeas that bloom on new growth. By removing all the old stems, enough of space is created for new branches to emerge, producing more but larger flowers.
You can only chop the top of the plant if you are feeling overly stressed or if you want to grow a taller hydrangea shrub. Reduce the plant to a size that is between a third and half of its original size. The plant will remain erect and the new growth won’t droop because of the support provided by the old wood. More flowers are produced as a result, although they are often smaller than those you may get from completely pruning it down.
When shouldn’t hydrangeas be pruned back?
Depending on which group the plant belongs to, the timing and extent of pruning are determined:
Advice on Pruning for Group 1:
- As the days get shorter and the weather gets colder in the late summer and fall, buds for the following year’s blooms start to form.
- Typically, removing dead, diseased, or damaged branches is all that is required to preserve shape, size, and a healthy plant. Otherwise, gentle pruning ought to be practiced.
- In the summer, trimming should begin as soon as flowering ends, but no later than August 1. Pruning should not be done in the fall, winter, or spring because you risk removing fresh buds.
- Tip-pruning the branches in the spring as the leaves begin to appear can promote more numerous, smaller flower heads as opposed to fewer, larger flower heads.
Advice on Pruning for Group 2:
- On the growth of the current year, flower buds form.
- Early in the spring, as the leaves are starting to emerge, prune.
- Just above a node, prune branches back by half to a third.
- After that, prune any fragile or spindly branches.
- Minimal trimming encourages huge, strong bushes with many of tiny flower heads in H. arborescens. Hard pruning between 12 and 18 inches from the ground, or even all the way down, will result in fewer but larger flower heads that may flop if unsupported.
- For H. paniculata, remove the surrounding smaller wood while leaving the larger stems in order to establish a sturdy foundation.
Pruning may be connected to flower head size. Shoots will grow more vigorously and flower heads will be bigger and fewer with more rigorous trimming. Smaller but more numerous flower heads may result from less aggressive or tip pruning.
Consideration of hydrangeas’ mature size is the best piece of advise. Place them in a location where they won’t outgrow and won’t need a lot of pruning to keep them in check. Hydrangeas don’t need to be pruned precisely or often; as long as dead wood is removed, they will remain healthy and continue to develop and bloom.
What occurs if your hydrangeas aren’t pruned?
If and when you prune is the key to happy, healthy hydrangea flowers. Of course, fertilizing and offering the ideal environment have a lot to recommend them. However, if you don’t prune properly, your efforts will be in vain. Deadheading is not the same as trimming. Pruning refers to more drastic cutting to preserve shape or remove dead growth. However, feel free to discard spent blossoms or cut fresh ones to use in arrangements.
Hydrangeas can bloom on either fresh wood or old wood, depending on the species. The wood from which they blossom determines whether and when to prune.
Old wood-blooming hydrangeas do not require pruning and benefit from it. They’ll blossom more abundantly the next season if you leave them alone. But feel free to deadhead or gently thin. Just keep in mind that while new growth may appear, it won’t bloom until the following season. In our region, four different species blossom on aged wood. Additionally, they are not limited to the hues displayed here.
Climb using suckers. On your wall or trellis, resist the desire to remove the dormant growth.
The flower heads are more conical in appearance, and the leaves are large and resemble oak leaves. It’s a pleasant surprise for a hydrangea when its leaves turn reddish-orange in the fall.
They are very comparable to lacecap types, but smaller and with more compact leaves.
Pruning should be done in late winter or early spring on hydrangeas that bloom on new wood. Trim back to two feet to prune to shape. The next season’s blossoms are produced by strong, fresh growth that is encouraged by trimming. In our region, there are two types that bloom on fresh wood. They are also not restricted to the colors displayed.
Oakleaf variants are not included in cone-shaped blooms. Keep the blooms on throughout the winter to provide interest; even dried out, they are quite lovely.
regarded as a wild kind. They often have smaller blooms and leaves than Bigleaf variants and are completely white. They enjoy full sun and can grow very tall.
Knowing whether or when to prune now will help you avoid the disappointment of a hydrangea that doesn’t blossom. Don’t forget that a robust shrub will produce more gorgeous blossoms if it has well-draining soil and good organic fertilizer. Come on in, and we’ll show you where to go to develop your green thumb.
In the spring, should I deadhead my hydrangeas?
According to Meyers, the species of hydrangeas will determine the optimal time to prune them. When the initial set of flowers emerges from the previous year’s growth in the spring on bigleaf hydrangeas like Endless Summer, she advises, “deadheading to remove the faded blossoms before the next flush arises.” As long as the cut is made before July or August, when the plant starts to create buds for the blooms of the following year, you can make a deeper cut for a longer stem. She advises removing the faded blooms off smooth hydrangeas as soon as they turn green in order to guarantee a second flush of smaller flowers in the fall.
Should you prune your hydrangeas?
When should I prune my hydrangeas? is one of the most often asked gardening topics. We all have a tendency to want to hurry outside with the clippers and start hacking away when those billowy large flowers change from cheerful blues, purples, pinks, reds, and whites to uninteresting browns.
When to Cut Back Hydrangeas
The timing will vary according on the variety of hydrangea you have. First of all, be aware that hydrangeas do not require pruning unless the shrub has become unruly or too big for its location and requires some shaping up. Otherwise, simply deadhead wasted blooms and remove any dead branches from the plant.
How to Prune Hydrangeas02:07
But if you do decide to prune one, bear in mind to time it so that it blooms on old wood or new wood depending on the species of hydrangea you have.
If you wait too long, you can chop off the buds that are developing on old wood (stems from the year before the current summer), which would prevent flowers from blooming the following spring. Therefore, as soon as the flowers on these bushes have faded, they should be clipped.
The shrub should be clipped in the early spring before that new growth appears, but, if the shrub flowers on fresh wood (stems generated during the current season), which means that its buds are set inside the season.
Cut back these shrubs in late winter before new growth begins
Shrubs that flower on young wood typically start blooming later than old-growth bloomers, beginning in June and continuing until the first frost, because they need to grow and set buds the same year that they bloom. As long as you avoid trimming when the flower buds are opening, these shrubs are understanding if it is not done at a specific period.
1. Trim the flowers all the way back for larger blooms.
These bushes can be completely removed from the ground in late winter or the beginning of spring. If cut severely like this every year, smooth hydrangeas will produce much larger flowers, but many gardeners prefer smaller blooms on stronger stems.
2. Maintain an old growth foundation to lessen flopping
Especially after watering from above or after a heavy storm, the branches of some hydrangeas frequently topple over from the weight of their blooms. Cutting the stems to a height of 18 to 24 inches will help to reduce this flopping by creating a strong framework for fresh growth.
Janet Carson is the University of Arkansas Cooperative Extension Service’s horticulture specialist.
Receive our most recent advice, training, and tutorial videos in your inbox.
Which plants require pruning in the spring?
Yes, thinning out perennials is necessary for their wholesome development. Getting the timing right is difficult. A list of several popular perennials and the best time to prune them is provided below. If you have any plants in your yard that weren’t on the list, find out when the optimum time is to trim them by doing some research or speaking with a local arborist.
What Perennials Need to be Cut Back in the Fall?
To prepare these perennials for a strong growing season, prune them in the fall:
- Hosta
- Peony
- Daylily
- Yarrow
- Beebalm
- Catmint
- Salvia
- Hollyhock
What Perennials Need to be Cut back in the Spring?
Just before the spring’s new growth appears, prune these perennials:
- Mums
- Coneflower
- Russian mystic
- Aster
- Decorative grasses (in southern states, can be cut back twice per year)
When should dead hydrangea blossoms be removed?
These are your macrophylla hydrangeas, also known as mophead and lacecap, which come in purple, pink, and blue. They also include hydrangeas with oak-shaped leaves. While reblooming kinds flower twice, some cultivars only bloom once per season on stems from the previous year (old wood).
The initial set of hydrangea blossoms should be deadheaded as soon as they start to turn brown and dry. Cut the stem immediately above the first set of leaves and below the flower head. When this second set starts to fade, you can deadhead once again for reblooming varieties, but only until about mid-August. Your hydrangeas will then produce buds for the flowers of the next year; you don’t want to unintentionally cut these off. After the summer has ended, dried flower heads can remain on the shrubs to add visual interest over the winter.